Your cart is empty.
Your cart is empty.These tie-downs are for securing all of types of light or heavy loads and/or equipment. When installed, the surface is flush with the bed of your truck or trailer. Each tie-down D-ring includes a large backer plate that helps to solidify and protect the bed material, while adding strength and rigidity. Included in this set: 6 - Heavy-Duty (6,000 pound rating) recessed pan D-rings 6 - Over-sized backer plates (6 1/2" x 6 1/2") 24 - 3/8" x 2 1/2" Grade 5, zinc-plated, carriage bolts 24 - 3/8" zinc-plated flat washers 24 - 3/8" Grade 8, zinc-plated, nylon lock nuts Detailed DIY installation guide Weather Resistant Zinc Plating: This set of D-Rings and all of the included hardware are zinc-plated for corrosion resistance and excellent protection from the elements. Heavy-Duty Construction for the Toughest Hauling Jobs: This set is simple enough to handle small tie-down jobs and tough enough to handle larger loads. Each D-Ring has a load rating of 6,000 pounds. Our large (6 1/2" x 6 1/2") heavy-duty backer plate adds additional protection and rigidity, preventing tear-through of your bed material. High-quality mounting hardware is made from tough Grade 5 and Grade 8 steel. Nylon-insert lock nuts assures your mounting will stay tight even with road vibrations. The 2 1/2" carriage bolts can accommodate truck and trailer beds up to 1 5/8" thick. Includes DIY Easy-To-Follow Installation Guide We've included an installation guide that helps to walk you through the installation process, including recommended hole sizes, tool sizes and layout guidelines. For easiest installation, we recommend having the following tools: Electric Drill 1/2" drill bit (15/32" could work, but requires more precision) 3 1/2" whole saw (3 1/4" could work, but requires some extra routing/chiseling) 9/16" wrench (a deep socket or ratchet wrench makes things go easier/quicker)
user 567
Reviewed in the United States on August 12, 2024
Use a 3.5 inch hole saw or draw a template and use a jigsaw to fit these in your floor. I had my brother under my trailer after I drilled out the holes and he was able to mount these up using an impact driver. I like the fold down design and I can roll over them easily when In my wheelchair. 6000 lbs capacity makes these beefier than the trailer they are mounted on.
ALBadger
Reviewed in the United States on June 30, 2024
Very well built D-Ring with oversized backplate allowing multiple placement options and galvanized 3/8" carriage bolt hardware. Highly recommend.
Clary
Reviewed in the United States on March 5, 2023
I put these on my 10' X 5.5' trailer that didn't have the greatest anchor points. I read the reviews and decided to get the 3 3/8" hole saw for the installation......DO THIS! The 3 3/8 hole saw made these fit perfectly. They went right in without any slop whatsoever. Attaching the backing plate and nuts was a breeze and, after testing these out, I'm sure the wood deck will fail before these anchor points do. The entire installation took about an hour and a half, including the layout.
Evan Hufford
Reviewed in the United States on October 29, 2023
These are sturdy and well built. I used a 3.25” hole saw and then just filed the wider edges for a tighter fit.
ddk1977
Reviewed in the United States on September 21, 2022
Excellent quality, did not cut large holes as we wanted a tight fit, this method took more time to install, but worked out very well. Excellent value!
A Holmes
Reviewed in the United States on September 11, 2022
Couldn't believe how expensive these tie downs have become. They cost even more in the store with no hardware though. Easy enough to install if you have a drill and hole saw(I used 3.5", almost too big. 3.25"would be perfect).
mike
Reviewed in the United States on October 30, 2018
Awesome items. I love these tie downs. Install was relatively easy. 1 word of advice, drill your main hole, then set down tie down and drill 1 hole and insert a bolt into that hole, drill another hole and insert bolt into that hole, drill 3rd hole and insert bolt into that hole and drill the last hole and put the bolt into that. I didnt do it this way until the last 2 and had to fight the bolts to line up with the plate underneath but they worked no problems. Decent quality and such. We will see how they told up to a winter in Chicago tho. Overall well worth the money.
JGE75
Reviewed in the United States on April 20, 2016
They are well made, but the D rings are too tight to move easily. I had to remove one lock washer from each one to get them to operate. I cannot have them so tight it takes a screwdriver to pry them up for usability. It seems as though they could have used thinner washers. I bought a set from e-Trailer and they work fine. The way I had to remove a washer, now they are so loose, they rattle on the trailer.The above is the letter I wrote in response to a letter from Mike Kerstetter, Customer Service, Skip The Mall asking how they did. Mike got that email and within 2 hours responded with and answer that they would be glad to try an adjustment on the D-rings and send me another set to try out. I told him to go ahead. It's not often you get that kind of service anymore.The replacement set arrived and it was 100% better. Still not as smooth as one that I had bought elsewhere. But I needed 5 D-rings. This came as a set of 4, which left me no option but to look elsewhere and, yes, pay more for a single D-ring.Overall, these are very well made, sturdy and work pretty quiet and smooth. I am sure they will last as long as the trailer. Thanks Mike - Great Customer Service!
Recommended Products
