Your cart is empty.
Your cart is empty.Product Description
Dent Puller Kit
Dent Puller Kit Composed of plastic and aluminum materials, suitable for dents with a width of less than 2.36 in. You can use a hot melt gun for assistance, and then use a blue plastic sheet for operation.
Bridge Dent Puller
The bridge type dent puller is composed of plastic and aluminum materials and is suitable for dents with a width of 1.18 to 3.14 inches. You can use a hot melt gun for assistance, and then use a blue plastic sheet for operation.
inch indentation puller
For the repair of large depressions using vacuum suction cups, it is necessary to clean the large depressions with a towel before operation
Metal tapping pen and Rubber Hammer
A hammer is used in conjunction with a striking rod to gently strike protruding points
Hot melt adhesive gun (20W) and hot melt adhesive rod
Come with a 20 W hot melt glue gun and 10 hot melt glue sticks. There is no need to purchase another part, enough for most dent can meet.
Accessory List:
--30* Glue Tabs
--1* Rubber Hammer
--1* Empty Bottle
--2* Yellow Plastic Shovels
--1* Rag
--1* Product Instructio
--1*bag
Dent Puller List:
--1 * Bridge Dent Puller and 7 * Accessories
--1 * Gold tooth elevator
--1 * Metal tapping pen (with 9 pen tips)
--1 * Hot melt adhesive gun (20W)+10 * Professional hot melt adhesive rod
--1 * 4.72 inch indentation puller+1 * 2.36 inch indentation puller
How to use a bridge type dent puller?
1. Insert the hot melt adhesive rod into the 100W adhesive gun, and then heat it for about 5-7 minutes until the adhesive overflows from the gun.
2. Select a suitable plastic adhesive pad and apply hot melt adhesive to it. The bridge dent puller has 7 black protrusions that you can choose based on the size of the dent.
3. Place the plastic adhesive pad on the dent, grasp and wait for three minutes until the hot melt adhesive turns into a block.
4. Use a bridging dent puller to align, then slowly tighten the screw with appropriate force until the dent surface becomes flat or visibly protruding. This process should be carried out cautiously and slowly.
5. Spray 75% alcohol onto the remaining glue and wait for 3 minutes. Peel it off or use a plastic yellow spatula to remove it.
How to use a gold tooth elevator?
1. Insert the glue stick into the 100W glue gun, and then heat it for about 5-7 minutes until the glue overflows from the gun.
2. Select a suitable plastic adhesive pad and apply hot melt adhesive. 64 plastic adhesive pads can be used.
3. Quickly place the plastic adhesive pad on the dent, grab it and wait for three minutes until the hot melt adhesive turns into a block.
4. Use a dent elevator and adjust its height to repair the dent.
Kara
Reviewed in the United States on March 3, 2025
This is the second kit I tried and they’re just too cheap. The Durability isn’t there because it’s cheap plastic. Not heavy duty enough to try and pull a dent out of a car. Tried it on a plastic bumper and a metal fender with no luck. I do like that it all fits in a small case for easy storage, but it’s more worth to spend the money on an upgraded kit so it works properly.
Earm James
Reviewed in the United States on February 3, 2025
The glue gun stopped working after the first use, the glue is not holding on I know it's probably something I'm not doing right.
Steven Hulsey
Reviewed in the United States on January 11, 2025
Built way better than I expected, strong.
Frank Lanza
Reviewed in the United States on September 22, 2024
Didn’t pull dent
David W
Reviewed in the United States on August 5, 2024
Easy to use, although it took several tries with the smallest blue "T". The glue gun works fine and the dent pulled out before the glue failed. It's best to put some felt pads on the puller gun's rubber feet that rest on the car's paint - don't want more repairs. As for the kit: What more can you ask for the price?
Gary
Reviewed in the United States on August 11, 2024
It could be operator error but I could not get any of the glue sticks to adhere enough to pull any dents.I used in 75-80 degree F weather. Six tabs all pulled off leaving glue on the paint and pads.I tried varying amounts and set time with the same results ever time.Equipment appeared sturdy enough to work.
Pleased Texas
Reviewed in the United States on February 22, 2024
Great product for the price. I live in Texas where it hails just about every time it rains. A good quality pdr kit has saved me thousands of dollars and saved me from spending time dealing with repair shops.
Ma Mae
Reviewed in the United States on October 14, 2024
Worked better than expected
Recommended Products