Shopping Cart

Your cart is empty.

Your cart is empty.

6 Pack Desk Grommet 50mm (1.97 inch) Bi-Metal Hole Saw Kit with Cord Wrap Coiled Tube Management,2 m Cable Sleeve Organizer with Table Hole Cover

Free shipping on orders over $29.99

$12.99

$ 5 .99 $5.99

In Stock

About this item

  • Includes: It included everything you needed,1 pc 50 mm M42 Bi-Metal hole saw blade with drill bit,23 mm depth; 6pcs bicafa 50 mm plastic desk wire cord cable grommet; 1pc hex key; 1pc 2m diameter 16 mm cable sleeve. It’s time to clean up wire clutter on desk trading station
  • Keep Clean and Tidy: Take some time for the saw to cut, so you can get a smooth and clean round cut that fits the grommets well. The cable sleeve and countertop grommets are suitable for installing and organizing wire and cable of desktop equipment. It looks good and keeps everything organized
  • Simple but Useful: Just take a little floundering to figure out how the tools work even though you are not a handy man, but take a little practice before you cut the holes on your desk; then put the desk grommet directly into the drilled hole; Use the cable sleeve to manage your wires on/under your desk
  • Good Quality: The saw is made of M42 high-speed steel and BI metal, with higher hardness, toughness, cutting strength and stronger wear resistance. Plastic Desk Grommet with a clip-on cover, excellent comprehensive performance; Premium PE material Cable Sleeve Organizer, exactly durable, wear-resistant and safe to use
  • Application: Please take a little practice before you cut the holes on your desk; When starting drilling, cutting at a slow speed (below 420RPM) and holding steady pressure; You should remove the saw spring when the expectative depth is over 10 mm The grommet diameter is 50 mm(1.97 inch) less than 2 inch, only perfect fit for 50 mm holes, if you just want to replace the old one which perfect fit for 2 inch hole, they are a bit loose.but you can use tape around the grommet to make it fit snug



Product Description

desk grommet

Important Notes

  • The grommet perfect fit for 50 mm/1.97 in holes. if you just want to replace the old one which perfect fit for 2 inchs hole, they are a bit loose. but you can use tape around the grommet to make it fit snug.
  • Paying attention to the Installation Instruction will not only let you know how to use the cable sleeve better, but also let you know that you are receiving the Bicafa Products.

Some tips for using Hole Saw:

  • You should remove the saw spring when the expectative depth is over 10 mm.
  • The hole saw should be formed at a 90 degrees angle with the surface and keep stable.
  • Please keep a slow speed (below 420RPM) and holding steady pressure.
  • Please let the hole saw takes a break for 3 minutes after finished 2 holes.
  • Cement board, metal concrete, glass, ceramic tile are prohibited.
  • Electric hammer or Percussion drill are prohibited.
  • Please wear the following when operating the saw:Goggles, Mask, Earplugs, Gloves

Why Choose Bicafa Grommets?

  • Strict Quality Standards:Every product is inspected three times to ensure that every product meets the standards.
  • Low-Plastic Packaging:We've reduced the amount of plastic used in packaging for the entire lineup by an average of 90% . The outer material of the packaging has been changed from plastic to pulp and packaging paper is 100% recyclable.
  • More Possibilities for DIY:With the approval of the hole saw, you can play with greater freedom.
  • Yes,just put the grommet directly into the drilled hole ,Suitable for computer desks, office equipment, PC peripheral,entertainment systems in office, home and school.

  • The key is control the speed ,you can learn more about the tips for hole saw use.


Kindle Customer
Reviewed in the United States on February 15, 2025
Just what my son needed, for his new desk in his new home.
la
Reviewed in the United States on January 17, 2025
The hole made by the included holesaw was the perfect size for the insert. They work well and cosmetically look much better than a raw hole in the wood. I tried the cable wrap and inserter and both make the job of wrapping and securing the cables much easier. Overall a good product and a good value.
Michael B.
Reviewed in the United States on January 10, 2025
I bought this set because it came with the hole saw. The only downside is that the hole is slightly too large for the grommet. I would say maybe a millimeter or two too large. That’s not really a deal breaker because for the price it is worth every penny. However keep in mind that the grommet can easily pop out when pulling plugs back out of the grommet. It is a very minor inconvenience but one that should be mentioned as that is the only problem I found with this set and the only reason I gave it four stars instead of five.
Phyllis Mae
Reviewed in the United States on August 17, 2024
Anyone with a power drill can install these. The hole saw is included!
JH in MN
Reviewed in the United States on July 16, 2024
Just what I needed for a couple of electrical cord pass-thru's. A few extras for future use. And the 2" hole saw is a plus. All good!
D. Young
Reviewed in the United States on May 21, 2024
They work and look very nice. Have a nice positive snap. The hole saw though, is very cheap, and after 2 holes starts burning wood. Have 5 in my desk, and all work and look great though.
Robinson Suárez
Reviewed in the United States on December 27, 2024
Helped me with my cable management project. Did three wholes and they all came out good. The bit went through without any problem and I didn’t have any chipped wood of the vinyl top broken after doing this. They black things you fit in the wholes they fit snugly in with out any problems and I don’t think they will come out of place.
Dianne
Reviewed in the United States on December 16, 2024
The media could not be loaded.
Recommended Products