Shopping Cart

Your cart is empty.

Your cart is empty.

50W LED Exposure Unit Kit UV Screen Printing Light Screen Printing Exposure Unit with Retractable Adjustable Stand for Screen Print Exposing Photo Emulsion Cyanotypes Office

4.4 (13) Write Review
Free shipping on orders over $29.99

$31.99

$ 16 .99 $16.99

In Stock
  • Uv Exposure: the light wavelength of our 50W screen printing kit is 395nm, high energy able to shorten the solidification time of photo emulsion; The exposure time is about 3-5 minutes, which depends on the thickness of the emulsion, and this typically illuminates a base size of approximately 10 x 8'', but the range of illumination will vary with the height of the adjustment
  • Easy to Apply: our screen print light works as plug in, time and effort saving, convenient easy to operate; In addition, the stand can be easily mounted on the table without additional tools, and you need to provide your own plug adapter
  • Adjustable Stand: the stand our screen print exposure unit can be adjusted at different heights and angles to satisfy different exposing demands of screen print, bringing a lot of convenience to you
  • Use with Confidence: the stand of our screen printing supplies is made of metal, firm and durable, strong enough against breakage, deformation and fracture, can support your multiple uses and offer a long service time
  • Wide Range of Applications: this exposure lamp for screen printing is not only designed for making screen plate in screen printing, but also suitable for pad printing, cyanotypes, hot stamp printing, photo emulsion kit and so forth


Product Description

1
2
3
4

Bill Holder
Reviewed in Australia on September 20, 2024
great for home use. Good enough to do semi professional work without paying a fortune for the lamp
MG
Reviewed in the United States on May 3, 2024
Poor quality, cheap design, barely held together, light is weak!
Patricia Hepp
Reviewed in Germany on October 18, 2024
Ich will die Beleuchtungseinheit gerne für Cyanotypien einsetzen, kann sie aber im Moment nicht nutzen weil der Stecker komplett falsch ist. Ausserdem ist die Beleuchtungseinheit und die Halterung nicht compatibel, passt einfach nicht.
roxsy ruiz
Reviewed in the United States on January 31, 2024
I tried burning two screens . The first did nothing after leaving for 15 minutes and the second did nothing after leaving it twice for half an hour. Don't purchase for screen printing. I'll try it for resin and update review. If it doesn't work will just throw in the trash.
Michael gutierrez
Reviewed in the United States on September 6, 2023
It is everything I asked for …
Anna Kurbatova
Reviewed in Germany on August 8, 2023
Stand looks and works good, and about lamp itself i have nothing to say until EU plug will come — would be great to mention Chinese plug in product description
cristobal valentin
Reviewed in the United States on August 6, 2023
Is fair not to bad.
Kiera
Reviewed in the United Kingdom on August 6, 2023
Frustratingly you will need a us to uk plug adaptor. I have not used the product yet, as I now have to order an adaptor. I’m a bit concerned no where on the box does it say the bulb is UV which is what I need. I will update once I have used it.
Elizabeth Miller
Reviewed in the United States on July 30, 2023
To be clear, this comes as two separate parts: the UV light and a tablet stand to hold it. No instructions but it’s relatively easy to put together. I did end up putting gorilla tape on the clamp of the stand to keep the light extra secure. The clamp alone didn’t feel quite tight enough.All that said, this is great for making cyanotypes! I’m so excited to have this and be able to make cyanotypes without depending on the sun.The light does get hot but I honestly wouldn’t have noticed if I hadn’t read another review that mentioned this. For my purposes, once I had the height set I didn’t need to adjust it again. I do wish the cord was just a bit longer, it’s quite short.
H. Mitchell
Reviewed in the United States on July 27, 2023
So first off, this lamp gets HOT. Like, concerningly hot, where I'm afraid to use it if I'm not in the same room with it. I also didn't realize the lamp is just a lamp that clips into a generic iPad stand. It's hard to get them to solidly connect because the lamp is thicker than the clamp that's supposed to hold it. Once it's on, it's too hot to reattach bare handed, so you either have to wear gloves or stop your exposure and let it cool down before you can reattach it. I wouldn't buy it again, but it works for now.
Sean R.
Reviewed in the United States on December 27, 2023
It’s a generic tablet holder, that does not get a firm grip on the light. The light falls out. It will work with some modification, and was fairly inexpensive.
M.N.
Reviewed in the United States on December 12, 2023
This is a joke. It comes with an iPad clamp and a small uv light that is not strong enough to expose my screens.
Rebecca Cracknell
Reviewed in the United Kingdom on October 10, 2023
It was not mentioned in the description that it would have a US plug on it. The stand looks good but the light is unusable in the UK, we cannot find an adapter to make it work. Tried to put a uk plug on but the wires are not the same. Disappointing, looks ages to arrive and then un able to use! Can't send back as have cut the plug off now.