Your cart is empty.
Your cart is empty.Product Description
- LEIGESAUDIO is the symbol of high-quality car audio accessories.
- All of our innovative products are designed and engineered for high performance by the best industry experts from different countries.
- To fit your system needs,we offer a series of complementing connectors and accessories-all designed to work together precisely.
LEIGESAUDIO 500 Watts MonoBlock Amplifier
BOOST YOUR BASS
Using the LG-500.1D amplifier can significantly boost the bass of your vehicle. CLASS D - Power loss is significantly reduced making the amplifier highly efficient.RMS Power 900w @ 1ohm, 600w @2ohm and MOSFET power supply take your vehicle audio system to a new level. You can customize your sound with bass boost and remote subwoofer control. This LG-500.1D amplifier is perfect for first-time car audio buyers looking to add bass, enhanced sound, and performance to their system.
- CLASS D Monoblock, MOSFET Power Supply
- MAX Power 1Ω：1x2200w @ 1ohm
- Variable Low Pass Crossover, Bass Boost
- Remote Subwoofer Control
- Dimensions: 7"×8.2"×1.96" (180mm×210mm×5mm)
DURABLE AND FAST DISSIPATION
Aluminum shell, better heat dissipation performance.
VARIABLE BASS BOOST
Variable Bass Boost allows you to adjust the low bass within the boost range to just the way you need.
LOW LEAVEL INPUTS
Low-level inputs accept pre-amp output signals to allow for tha addition of amps and processors to units equipped with RCA Pre-amp outputs.
MOSFET CLASS D
Class-D amplifiers Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it's needed instead of being converted into heat. Reduction in size/weight, reduced power waste, smaller heat sink, compact circuitry.
1 OHM STABLE
1-Ohm stable comfortably powers speakers or subwoofers when in use at 1-Ohms, resulting in more power and volume.Have more current drawn from your vehicle's electrical system.
STRAPPING CAPABLE
Strap two amplifiers together to get double the power at an impedance of 2-Ohms.
VARIABLE LP FILTER
Variable Low-pass filter gives you control over the frequencies that pass through to the subwoofer. You can set exact sound specifications for the bass frequency reproduction
NW_RC_KRAWLER
Reviewed in the United States on February 24, 2025
Actually puts out rated power
Maybury
Reviewed in the United States on December 23, 2024
I have it turned half way down because it’ll blow my 8” Skar SDR. It’s definitely 1-ohm stable. Doesn’t get hot at all. In the pic- you’ll see I had some cooling fans hooked up, because the old amp would heat up. After replacing with LEIGESAUDIO, This thing runs cool, and I’ve been on some long road trips and it does very well. I don’t need the fans anymore, but I do need to upgrade my sub, because this amp is too powerful for it. Great for a little budget starter. ThiS was my first build. I recommend 100%.
Jscott
Reviewed in the United States on November 2, 2024
I bought this amp for the best budget system i could make. I got this amp and 2 hifonics 12s in a box I made. It hits pretty good for as budget as it get system. Not going to win any rewards, but good for my kids first car. She is stoked about it. I've even smelled the subs sometimes. Lol for the money you can't hardly bet it.
Stevan
Reviewed in the United States on April 11, 2024
I have been continuing to try and get this amplifier to work for my fiancé for 9 months. It will power up and make a subwoofer move but the problem is it won’t turn off. No matter what I do to try and correct the problem it persists. If left alone the car battery will drain to 0. I have done a dozen car audio installations for friends and family I know what I’m doing. I have tried changing where it’s grounded where its power cord is connected I’ve tried many different places for the remote wire. I have crossed off every possible issue and have narrowed it down to a problem with the amplifier itself.
E_Dogg
Reviewed in the United States on September 8, 2023
I got it powering a 6.5” scar evil subwoofer, in a small box with a 6.5” passive radiator. It replaced an older JVC class AB amp that outputs approximately the same amount power at 4 ohms. But, as others have noted, it hits harder than the JVC and, as expected, runs cooler. I guess you could say this is exactly what you would expect from a class the amp when comparing it to a class AB.Long story short, it’s a very inexpensive amp for what you get. I really like the fact that it came with a remote bass control. iMO, probably the only other comparable deal out there, watt for watt, is the latest Jensen class D amp. I own that amp too, and I could tell you that the Jensen is noisier.If you’re just looking to add some extra bass to your car, this is a great choice. Let’s hope it lasts.
Antonio Kunz
Reviewed in the United States on September 24, 2023
I decided to buy this amp after seeing the Williston Audio Labs bench test of it on YouTube. For $70, you cannot beat this amp. It actually pushes the advertised 500 watts at 1 ohm. I installed one of these amps in a customer's minivan, powering a 15" Skar SDR 2 ohm DVC, wired down to 1 ohm in a sealed box and man, it absolutely slams. It takes your breath away sitting inside the vehicle. I also installed one of these amps in another customer's vehicle, powering a 12" JBL 4 ohm DVC and a 12" Skar SDR 4 ohm DVC, wired to a total impedance of 1 ohm in separate sealed boxes and it shakes the car, while still producing punchy, accurate bass. Not nearly as muddy of sound as I feared it would be. I would recommend these amps for anyone building a budget system and wanting to push out some serious wattage.
Tracey
Reviewed in the United States on April 9, 2023
does amazing job pushing 2 skar ix8D4's in 2.4ft3 bass reflex enclosure with amp output 540watts @ 1 ohm very well without fail or kicking out from heat. Update 9 months and amp continues to output as strong as day 1. just bought 2 CT Sounds Tropo 18D4's installed in 10.64ft3 bass reflex enclosure i built from 0.75" mdf. uses 2 6 inch ports 18 inch long and 9ftx6ftx1inch thick poly fill roll. deep cycle battery next to amp with 0awg +/- cables. amp has 2 8awg cables from battery + terminal to power it and 2 8awg ground cables one from battery and one from truck chassis. subs shold be 1ohm impedance but after wiring impedance was 2.4 ohms oddly but none the less amp outputs 432.2 watts with bass boost set to max. i registered 130dB @ 34hz with laptop, 2 different cell phones and 4 different dB meter apps and a room acoustics analyzer. amp gets very hot and kicks out if bass remote is higher then 40% in about 15 minutes. will buy a better amp for sure and save this amp to power the 2 front mid bass woofers i plan to install around spring time when i make or get some front door pods made
Dereck W.
Reviewed in the United States on May 2, 2022
I purchased this item with low expectations it would perform as advertised. For the price of 60 bucks, this amp promises a lot of value. You can see the specs page for all of the inputs/outputs, I prefer to talk about output power here. I use an SMD Amp Dyno AD-1 to verify power output. The Leiges TG-500.1D is rated to deliver:350x1 at 4 ohms600x1 at 2 ohms900x1 at 1 ohmall RMS specs at 14.4VDC according to the manualOdd in that the amp clearly has the model number 500.1 and even says "500 watts" on the heatsink.You can see the attached image for all of the Amp Dyno tests, but clearly you can see this is a 500W amp, not 900W. That said, at the current price, this is one of the best values of wattage per dollar I've seen. This amp won't require upgraded electrical (use 8ga OFC power/ground), so the overall cost with this amp, a sub and a wiring kit won't break the bank.Other than the made up RMS and MAX ratings, this amp for the money seems to be a very good deal. Maybe buy 2 in case one goes bad? In any case you'll have just over a hundo and an extra amp. I tried this amp with the KICKER L7R Quad Box wired at 1 ohm and it sounded fantastic. No issues whatsoever with the sound quality. Amazing!
Recommended Products
$145.99
$ 63 .99 $63.99