Your cart is empty.
Your cart is empty.Drew
Reviewed in the United States on February 3, 2025
Easy to use. MAKE SURE YOU LOOK KNOW YOUR SCL AND SDA PINS ON YOUR BOARD! Just wire, download a couple libraries to your developer application (e.g., Arduino IDE), download/open/edit example code and your off running! As for blue and yellow pixels, the top quarter of the display is yellow and the bottom three-quarters is blue. Don't expect the display to be able to use both colors over the entire display.
just another customer
Reviewed in Canada on January 13, 2025
very bright / high contrast. easy to use. love it...
RBWood
Reviewed in the United States on September 8, 2024
I've used these displays on several other projects, so I selected them again. The price is good, but not great. They work exactly as advertised. Note that some of the displays are monochrome (bluish green), but others have a few lines at the top that emit yellowish light. I like the ones that have a few yellow lines as you can highlight a title of whatever it is you're displaying.The only complaint I have is that Amazon does not include detailed dimensions of the part. I had to search other 0.96" parts (also from Amazon) to get the dimensions I needed. I integrate the display into a 3D printed housing. To get the front of the display flush with the housing, I needed to provide relief around the panel for a good fit. So I need all the physical dimensions.
tereso martinez
Reviewed in Mexico on August 7, 2024
Muy bien
Tyler
Reviewed in the United States on July 23, 2024
No complaints, but then I've never seen a problem with these simple OLED modules from *any* brand. Display is bright and crisp as you'd expect, and the I2C interface makes it dead simple to drop these into projects using existing display libraries.Be aware that the 2-color version has the display split 1/4 of the way down, with a small gap between the two colors. This works well for a top menu/status bar, but will look goofy if you want full-screen graphics.
JonasD
Reviewed in Australia on July 13, 2024
Love It i use it as my 3D printer Mini Screen
Rad'sRandom
Reviewed in the United States on May 2, 2024
I recently purchased the Hosyond 5 Pcs 0.96 Inch OLED I2C Display Modules for a project involving Arduino and Raspberry Pi, and I am delighted with the performance. These compact screens offer excellent readability with crisp blue and yellow displays, making them perfect for adding a visual output to any small-scale electronics project. The 128x64 pixel resolution is quite impressive for their size, and the SSD1306 driver integration provides smooth operation and easy setup. Compatibility with both Arduino and Raspberry Pi enhances their versatility significantly. I found the I2C interface particularly helpful for simplifying connections and saving valuable GPIO pins. Overall, these OLED modules are a great value for their price, offering high performance in a small package. Perfect for anyone looking to add a self-luminous display to their DIY electronics.
Bert J Telder
Reviewed in Canada on December 9, 2024
Loads of fun to experiment with!
Paul
Reviewed in the United States on December 21, 2024
For the price, these have worked great to display sensor readings and entity states on Home Assistant through ESPHome. Display is clearer than I expected, and was super easy to connect to an ESP32 or 8266. The mounting points on the four corners are great for attaching to a 3D printed case with screws.No complaints so far!
LarryB
Reviewed in the United States on December 11, 2024
The OLED displays exhibit several notable features. They are equipped with an I2C interface, ensuring clear output and facilitating straightforward programming through standard libraries. These displays effectively meet the specific usage requirements I had in mind.
Richard Chandler
Reviewed in the United States on November 16, 2024
To anyone attempting to run these on 5v, it DOES work, but there's a program variable you must set to change the voltage to avoid burning it out. It's simpler to just connect VCC to the 3.3v pin on the Ardruino board unless your project requires it.There are powerful graphics libraries written for this that are available for free from Adafruit. I recently got the Elegoo Uno R3 set and had been working through the demos, when I had the opportunity to add this to another Amazon purchase. All five worked right out of the box. I did have to change the address in the code because these are preconfigured to be 0x3C not 0x3D as the library assumes. I was curious what it would take to run one of these vertically, and it turns out you can rotate between four orientations with a single function call.I purchased the solid white displays, which do not have the black line across them that others have mentioned the two color displays have.
Christopher Brown
Reviewed in Canada on November 15, 2024
Good quality OLED screens. Tested they will run normally at a voltage as low as 3.5v without any loss of brightness. Each OLED screen is nicely packaged in its own protective little plastic box.
jacobgemini
Reviewed in the United States on October 17, 2024
The media could not be loaded.
Recommended Products