Your cart is empty.
Your cart is empty.Product Description
SDS Bushing Bit For Concrete Repair & Patch
Bushing Bit Available in SDS Max and SDS Plus Shank
SDS Plus Shank Bushing Hammer Bit
Shank: 10mm SDS Plus Shank
Overall Length: 5.8 inch
Tips Qty: 16 tips
Head Size: 1-1/4*1-1/4 inch square
Fittable Tool: SDS Plus rotary hammer or demolition hammer.
Usage: Remove laminated concrete and coating.
SDS Max Shank Bushing Hammer Bit
Shank: 18mm SDS Max Shank
Overall Length: 11 inch
Tips Qty: 25 tips
Head Size: 1 3/5*1 3/5 inch square
Fittable Tool: SDS Max rotary hammer or demolition hammer.
Usage: Remove laminated concrete and coating.
Choose The Right Tool For Your Project
Bushing Bit For SDS Plus Rotary Hammer
SDS plus bushing bit is used for small area chipping and roughness.
Bush Hammer For SDS Max Hammer
This 5 inch bush hammer plate can aslo fit with polisher and SDS Max demolition hammer. It is more agressive and time saving than the sds plus shank bushing bit. Suitable for wall and large floor project.
Bush Hammer For Polisher
This 5 inch bush hammer plate can fit with polisher, is more agressive and efficent than most shank type bushing bit. Suitable for large floor project.
Akgoldguy
Reviewed in the United States on March 4, 2025
This little bit eats concrete. Great for smaller projects. I had a few of the nubs break off after about 200 feet of bushing form lines. I would use the sds max bits for larger jobs.
Steveand
Reviewed in the United States on February 4, 2025
Works perfect with a Dewalt DCH133B
Patrick Luce
Reviewed in the United States on February 17, 2025
Work great, good quality.
John Deckmann
Reviewed in the United States on August 3, 2024
It works well, compact, sharp. It is small but it works well with small cordless hammers
stan
Reviewed in the United States on August 20, 2024
Attached to an inexpensive harbor freight 5.5amp hammer/chisel drill it made short work of removing high spots on a concrete floor so snap lock flooring would lay evenly .. it was a small area where high points were lowered and remaining area roughened for the leveling compound … approx 2’ x 6’ …. Bit is still in good condition . Took less than 30 minutes to roughen and clean/ wet for leveling
TJ Schleeter
Reviewed in the United States on December 6, 2024
Well my cousin had me buy these for him to keep in his toolbox at his job. He said this word great on light concrete stuff. As soon as he started putting pressure on it, it snapped. It was a couple months later after after I bought it so I couldn’t return it for him by your own risk.
Richard Coombe
Reviewed in the United States on December 23, 2024
I’m doing a small job at the house and I need to compact the ground. The area is 5” wide at the most and there are no tools that save a homeowners wrist from hammer swinging and impacts. I used this with a sacrificial 2x4 and it worked wonders.
Jesse
Reviewed in the United States on May 23, 2023
I can't believe how well this works. I used it to perfectly scarify a 16in x 7ft section following a vertical crack in my concrete block wall in maybe 30-45min total. The things the slowed me down were dying rotary hammer batteries, jackhammer overheating, and periodic cleanup. If I had a larger, corded rotary hammer, it would have taken maybe 10min + wire-brushing & cleanup.A similar sized section on another wall took me almost a week! I was attempting to minimize dust, so I tried chiseling by hand at first, then I got a needle scaler and paint scouring discs for a pneumatic sander. Those worked ok, but my air compressor was acting up. So, I bought the rotary hammer and used several flat or pointed bits to finish it off (and I thought THAT was a game changer). This concrete repair bit though, blows everything else out of the water.Pros:-Gentle enough for concrete block and doesn't break chunks away. (Chisel bits do if you aren't careful.)-Easy to control; just sweep it around and it will easily erase any paint, drylok, spalling, etc.-Inexpensive for how incredibly useful it is-Less mess! Forget about any kind of spinning sanding/grinding discs. I duck taped my wet/dry vacuum (with hepa filter and bag) hose to my rotary hammer and it kept all of the microparticles out of the air (as far as I could tell). The only stuff it didn't catch were the bigger pieces which fell straight to the floor.Cons:-Sweeping in a straight line will create grooves since the teeth make an even grid. -They might be able to avoid this minor problem by making the rows of teeth staggered, but that could also introduce other problems. It's not a big deal though, just use it diagonally periodically, sweep with circular motions, or try the rotating hammer function on your tool.-It bugged me a little that the head was too big to angle into the mortar joints, but that's my problem. I just have to buy their toothed chisel blade now.Additional info on my wall not the review:The vertical crack likely hasn't moved in many years. I just discovered it after tearing out a stud wall in my basement to install a better one + better insulation. The previous owners knew the crack was there because they had steel beams installed to the sides of it, and I found paint inside it. They decided to just wall it up and put fiberglass batting over it! Needless to say, the batting looked awful. I'm going to repair the crack with the usual materials, but I will also epoxy a 1ft wide carbon fiber strip over it from floor to ceiling. I will hopefully never know if the repair fails. I'm doing my very best, walling it up, and forgetting about it. Can't say the same for the last people.
Don
Reviewed in Canada on May 1, 2023
bonne solidité et durabilité dans mon cas pour un travail de moyenne intensité.
Fastest67Camaro
Reviewed in Canada on October 8, 2023
Great value for the price! I’ve got around 25-30 hours on it and it still has all its teeth.Been using it on various concrete jobs, just don’t push it for more than an hour or 2 at a time. It gets really hot and I assume that’s how people are breaking the teeth.If your looking to remove high spots on concrete, or even roughen up a surface to pour new concrete on top. This will work great!
Recommended Products