Your cart is empty.
Your cart is empty.Product Description
Suitable Fuel Type
This 496 Fuel Tank Filter is Designed for Use with Gasoline, Diesel or 20% Biodiesel (B20) Fuels
Installation
- Attach filter top cap to storage tank valve on opening marked “IN”
- Attach hose and nozzle to filter opening marked “OUT”
- When installing the element and bowl, apply a coating of oil to each side of gasket
- These components should be hand tightened only. Over tightening of the filter bowl will result in difficulty in removal at a later date
- When assembly is complete, check for leaks
Package Include
- 1x Fuel Tank Filter Assembly
- 1x Wrench
- 1x Teflon Tape
Bill Briggs
Reviewed in the United States on February 27, 2025
Works perfect . Priced right
AJames
Reviewed in the United States on January 5, 2025
Was purchased for home diesel tank work good at flowing out thing’s I don’t want in my fuel
Seeadler
Reviewed in the United States on July 6, 2024
I bought this to build a fuel polish unit. Well built filter
Francois Caron
Reviewed in Canada on July 6, 2024
Bon filtre pour le diesel
James
Reviewed in the United States on July 22, 2024
I have this installed on an external diesel tank that I use for my business, and it does a really good job of removing the sediment and condensation from the fuel. I have purchased the replacement filters and have been using it problem free for several months now.
william Brent housam
Reviewed in the United States on December 28, 2024
Works just as it should
Farron Whitworth
Reviewed in Canada on December 17, 2024
The bleeder valve was stripped when I received it.
Exelente tal como está en la foto
Reviewed in the United States on November 20, 2024
Deberia venir mejor envuelto
Deerfield Brent
Reviewed in the United States on October 25, 2024
Installed easily. The die cast top looks well made with clean well cut threads. Plastic bowl and threads perfect and unscrewed easily by hand contrary to many negative comments. Has an o ring seal. The brass screw drain works smoothly again contrary to some reviews. The included wrench seems to be plastic and very flimsy. Doubt it will survive changing a stuck filter. Will rate 4 stars now and update later if it passes leak checks after a reasonable time. LATER: Brass drain valve developed drip leak than increased to a stream after pumping less than 12 gallons. Terrible mess and dangerous. Do not buy this product.
Juan Carlos Valencia
Reviewed in Mexico on June 24, 2023
Excelente producto
M. Ellen C.
Reviewed in the United States on October 9, 2023
I have an external fuel oil tank that is many years old and was giving my furnace some trouble with water and sediment. I McGyvered a pump, pre-filter and used this filter as a second stage to take in the bad and output the good back into the tank. I was fully expecting to see water at the bottom of the plastic cup so I could drain it off. To my surprise, I never saw a collection of water. Maybe the pump was too fast. IDK. However, when I retested the tank the water was mostly gone. So it worked, sort of, because of the filter itself, not from seeing the satisfaction of how much water was in my fuel tank. 4 stars for the fact my filter contraption did what I wanted. 5 stars if I could tell it actually separated the water and how much.
Erny voth f
Reviewed in Mexico on October 27, 2023
Muchas gracias
Recommended Products