Your cart is empty.
Your cart is empty.
Mcwdoit CNC Router Bits adopting new processes,
it provides higher hardness and better rustproof,
Can be used with 1610, 3018, 3018pro and other
engraving machines.
⚡ Material: Cemented carbide
⚡ Package: 40 pieces CNC Rotary Drilling Hole Bit
⚡ Advantage: Sharp cutting edge, milling, hole and plate edge, clean surface, neat, no glitches
⚡ Range of processing: PCB, SMT, the CNC, mold, plastic, aluminum and other precision parts processing
10pc requires $15, 40pc ONLY needs $35.99 with ONE YEAR WARRANTY covered.
Such a Cost-Effective Kit, Order It Now!
SPEC IFICATION :
➤ 10pcs Ball Nose Bit 2-Flute Upcut:
3.175mm(SD) x 2mm(CED) x 17mm(CEL) x 38mm(OAL)
➤ 10pcs Flat Nose Router Bit 2-Flute Upcut:
3.175mm(SD) x 3.175mm(CED) x 17mm(CEL) x 38mm(OAL)
➤ 10pcs Titanium Coat End Mill CNC Router Bits:
CED: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3 mm)
3.175mm(SD) x 12mm (CEL) x 38mm (OAL)
➤ 10pcs Nano Blue Coat End Mill CNC Router Bits:
CED: 0.8-3.0 mm( 0.8, 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2, 2.4, 3 mm)
3.175mm(SD) x 12mm (CEL) x 38mm (OAL)
NOTE:
The end mill CNC bits is designed for hand-held and
desktop carpenter machines, cannot be used on percussion
drills and drilling machines and avoid materials such as stone.
Tamela S.
Reviewed in the United States on July 1, 2024
Great product
alison
Reviewed in the United States on February 24, 2024
Very pleased with the quality, selection and price of this set of bits!
Timothy Watts
Reviewed in the United States on June 11, 2023
I am a newly initiated xcarve owner. I have been having a time learning speeds and feeds and have broken every bit I have gotten with xcarve and the some. I have found that this variety pack is giving me the ability to try difrent cuts and is extremely helpful in not braking the bank with as many as I brake with each new project I try to cut. I for see me purchasing many more of these as I learn how to calculate speeds and feeds for each new project.I hope this helps you make your decision easier.Happy carving
Mike and Kim Mahaffey
Reviewed in the United States on March 7, 2023
They work very good, just learning cnc and so far these have been great.
Nicholas Williams
Reviewed in the United States on April 25, 2022
This is the perfect starting set for CNC milling machines. The various sizes and type of bits make this a go to for most of your milling needs. This set also includes bits for aluminum milling/engraving. If you are just starting out or need to replace some bits, I would recommend this package of bits.
mike
Reviewed in the United States on May 3, 2021
I like the assortment of sizes. I am a novice so don’t take my review as I know totally what I am talking about. I’ve broken all the smallest bits. I made it through one job with them and it worked well. But snapped on the next. I dropped one and it snapped as well. Not sure if feed rate was too high or what. One broke in a knot in the wood. Overall I am fine with the purchase. It was a cheap set overall with a large amount of bits. Allowed me to practice doing multiple tool paths for one job.
avjmc
Reviewed in Canada on December 9, 2021
Ensemble qui vous permet d’évaluer la qualité de différentes fraises.
JUAN
Reviewed in Mexico on November 10, 2021
Tiene lo necesario para corte cnc
Pascal
Reviewed in Canada on January 23, 2021
Pas encore essayé mais je croyais qu’ils étaient plus grosses. Devrait être utilisé pour la gravure
James
Reviewed in the United States on April 1, 2021
I'm new to CNC and to be frank I'm not about to pop a $350 set of Amanda's. These have been great cheap bits to help me catch the learning curve and they work well with my Snapmaker A350
Kevin Morissette
Reviewed in Canada on September 9, 2020
Got a CNC router and didn't want to destroy some expensive bits so I bought this. There's a lot of smaller ones I don't really use, but for detailing tiny stuff in the top mm of a workpiece, they're great. The cutting edge is a bit long though so they may snap.These are great for learning. Break a few, learn to not break them, use those same rules with your next set of more expensive bits and you'll be more than safe. The 1/8 ones I have yet to break any. The 1/16" ones are solid too. Just wish the cutting part was a lot shorter for stability and so I could run them harder without worrying. I guess they can reach deep spots if you have to, though.Only downfall is these bits shanks could be a tiny bit longer. By the time theyre inserted fully into the collet, it seems like it's a bit too far and some of the flutes are in there too. Havent had this be an issue. You can get about 20mm of the 1/16" and 1/8" bits coming out of the collet.
William C.
Reviewed in the United States on May 5, 2020
I haven't used all of them yet because there are so many.I started with the 1/8" flat end, and it's a beast. I've put it through a lot and it's been great.Then I used the 1/8" 2mm ball end. Broke 2 of them on the same test cut. They seem very fragile.Finally, I used the 2mm gold-colored rotary burr. Like the 3mm flat end, this seems to be a solid bit.I don't know if I just happened to get 2 bad round-end bits in a row, but I'm worried about the rest of those.
Phil
Reviewed in Canada on October 18, 2020
Work well on my Cnc. Very happy
Recommended Products
