Your cart is empty.
Your cart is empty.Product Description
Ledytech
Ledytech Ceiling fan light retrofit kit
This led ceiling fan light retrofit kit we designed is Lead-free, Mercury-free, No flicker and No UV .and the light temperature is comfortable, We also use it as a reading light .
How to install this LED ceiling fan light retrofit Source
Step 1
Cut off the power supply.
Step 2
Remove the damaged light source and BALLAST. and then magnet our new ceiling fan light retrofit kit to the ceiling fan.
Step 3
Connect wires,positive to positive and negative to negative. and then put the plastic cover back.
Step 4
Turn on the light .
Brian Bennett
Reviewed in the United States on February 25, 2025
Took about 10 minutes to install. Lights up the room.
Alex Chrisikos
Reviewed in the United States on February 23, 2025
changed the light from dull yellow to a nice bright white! did not come with stock connectors but easy to wire, would recommend
Henry
Reviewed in the United States on January 29, 2025
item works and is bright, but def does not work with all dimmers on the market. The original light is the one that came with my fan and it dimmed fine....this one will dim to dark about halfway on the dimmer switch and it pulsates unless its full bright. not a big deal as this is for a spare room, but I'll look for something different for the rooms we actually use and have this same dimmer switch at the wall.
siddis
Reviewed in the United States on January 2, 2025
Brightness & Efficiency: Provides bright, even illumination while being energy-efficient, perfect for various spaces like kitchens, hallways, or living rooms.Durability: Made with high-quality materials for a sturdy and long-lasting build.Ease of Installation: Comes with clear instructions and all necessary components, making it simple to install, even for beginners.A reliable and stylish lighting solution for modern homes!
Epiffany Media
Reviewed in the United States on January 16, 2025
I was hoping I wouldn't have to replace my entire ceiling fan because the cheap LEDs that came with it burnt out.Luckily I didn't have to do that. This, like other reviews is going to be more of the same snip the wires from your old LED or light splice in the new one with some wire nuts or lever. Nuts is what I like to use. And use the magnets or screws to reattach it to your fan. It couldn't have been easier. Took me no more than 10 minutes at the absolute most and that's removal of the old one and installing the new one.Doesn't put out any additional heat that I notice. I of course can't speak to the lifespan cuz I've only had it for about a week. This fan I am using it on does not have dimmable settings on the remotes but I would assume they work perfectly. It is plenty of bright for how small the unit is even though it was smaller than the one I was replacing.A very good buy comes with everything you need except the screwdriver.
DR
Reviewed in the United States on September 15, 2024
We have minkaAire Light Wave Fan. Model Number F844. The light started flickering and we searched online for a replacement and even contacted the minkaAire and they told us we need to contact the dealer. Unfortunately, its not easy to get a light replacement and not easy to locate a dealer, and even if you find one, it is VERY expensive.So bought this product to try it out. Getting off the Light assembly cover was little tricky, we had to hold the base metal piece with a plier and pull the plastic cover; without that it was difficult to take out the cover as there's no place to hold the base and pull the cover. Once the cover was out, we cut the wire of the old LED light from it's base, and simply twisted the new LED wires to it (after cutting the length little short), and wrapped with electrical tape.And it worked great, initially it looked quite dim. One thing we didn't realize is that this is a dimmable LED light, and we were the second owner of the minkaAire Light Wave Fan. Keep pressing the light button for longer will adjust the dimmability and then was bright a we had expected.It;s been more than a month now, and the LED light has performed well, and saved us lot of money, since we didn't had to buy the entire light assembly.We recommend the product, and it;s a good quality,
Blake86
Reviewed in the United States on December 17, 2024
Replaced the light in a ceiling fan and it worked as I hoped. The only issue I had, which isn't the Sellers fault, is the hole in the fan to run the wires was too small to get the wires connected with wire nuts or the connector included, into the hole to make the light flush to the fan. Again, not the fault of the light, just a heads up to others, and be on the lookout for the same issue and won't waste time like I did connecting and disconnecting trying to figure it out. The solution for me was just to use the included magnetic bracket, then I didn't need to try stuff the wires inside since there is enough gap with the magnetic bracket to work around it. Quality was great, from what I can tell. And the magnetic strength was pretty strong.
Arturo
Reviewed in Mexico on November 13, 2024
muy bien, buen producto, facil instalacion, alumbra muchisimo
Joshua Voss
Reviewed in the United States on November 11, 2024
I bought this unit to replace the light in my Minka-Aire F844-WH ceiling fan, which had started to flicker. I thought I would likely need to modify the board to get it to fit, but that wasn't the case. The Ledytech board fit perfectly onto the original heat sink, and the screw holes lined up precisely. It takes some force to get the plastic diffuser off the light, but once the board is exposed, the change out is straightforward. I did remove the power connector from the original board and soldered it onto the Ledytech board to make connecting / disconnecting it easier. The light has been in use for a few weeks now with zero issues.
Erick Christensen
Reviewed in Canada on October 26, 2024
Bought a very expensive LED floor lamp at a substantial discount because the store broke the led components. I bought this and replaced the light, it was a near exact fit with a tiny modification. Saved nearly $300 in the process. So happy I bought a second one to replace a Halogen bulb fixture in another light. These are very versatile in their applications if you are a little handy. I'll probably buy more as I need them.
David Ortega
Reviewed in Mexico on January 8, 2024
Fácil de instalar y muy buena iluminación.
Brian
Reviewed in Canada on April 4, 2024
I used this to replace a fan light that was starting an annoying flicker. The exact LED circuit board is no longer manufactured. This one had the same diameter with a slightly deeper lens cover which was no issue in my application. I cut the old connecter off of the old circuit board and used a couple of wire connectors to splice it onto the new board. The whole job took about 10 minutes. The old light was fairly yellow in colour. The new light is much brighter, whiter and no more flicker. Very happy with the light.
AdVoCaTe
Reviewed in Canada on July 23, 2023
Product was exactly what I was looking for to retrofit my ceiling fans dull screw in bulb. I had previously got a screw in led bulb to replace the old fashion bulb they had, but that still was dull and didn't provide much light. This led panel was perfect, its bright, it's dimmable, it fit perfect in my light fixture with little modification so definitely would suggest it for anyone looking to brighten up their old screw in ceiling fan bulbs/fixtures and change them to led
Recommended Products