Your cart is empty.
Your cart is empty. Specification:
Option: With touch panel, without touch panel
Input Voltage: DC 2.8~3.3V
Drive IC: ILI9486/ILI9488L
Screen Size: 3.5in
Screen Material:
Resolution: 320x480
Module Pin: 28 pin (8+8+6+6)
Touch Pen Length: 8.8cm/3.46in
Module Size: 8.5*5.5cm / 2.17*3.35in
Weight: Approx. 55g / 1.9oz
Packing list:
1 * LCD Screen with Touch Panel
1 * Touch Pen
or
1 * LCD Screen without Touch Panel
(Based on your option)
Note:
1. Due to the difference between monitors and light effect, the pictures may not reflect the actual color of the item.
2. Please allow slight error due to manual measurement. Thanks for your understanding.
Customer
Reviewed in the United States on August 10, 2022
It has a great look.
Guillermo Soriano
Reviewed in the United States on June 26, 2022
Sería aconsejable que driver es compatibleProbé con adafruit sin éxitoCon mc u friend funcionó
Miami
Reviewed in the United States on February 17, 2022
Works well.
Mark T.
Reviewed in the United States on June 7, 2021
Works well with both Uno and Mega 2560. You may prefer to use it with the Mega as you may run out of memory on Uno.You can display 2478 digits of Pi !!!
Nikhil Sethi
Reviewed in the United States on February 3, 2021
I could not find any documentations of example libraries for getting this to work. I tried UTFT library as description said is supposed to work. I tried a bunch of other libraries, but none of them worked.
Joel Styer
Reviewed in the United States on January 24, 2021
I already had a working setup with an STM32F4 driving a similar display with the same pinout. Plugged this one in, nothing. No backlight, no display nor any touch data. After slicing it open, some of the flex board soldering looked rather poor. Since it was the easiest thing to start with, I checked the touch panel connections, open. I unsoldered the touch flex cable and re-soldered it and that fixed the touch connections which now measure proper resistance. Sadly, I couldn't seem to find anything to fix the actual display although I didn't spend a lot of time on it. Since I cut it open, I can't return it but I am disappointed it didn't work. After using dozens of LCDs of all types, this is the first dead one I have had.
Rob Unger
Reviewed in the United States on June 15, 2020
Great price. Great picture. A little slow refresh rate
Mike W
Reviewed in the United States on September 22, 2019
Display arrived, and looks like a nice display. However, there is no documentation. It works with the arduino due, but if you're using the mega, the pins are different and requires software SPI which complicates it a bunch. This screen uses the ili9486 driver. This driver is not implemented in many libraries at all. Took me over 3 days just to find a library that gives anything other than a white screen. Look for a display that uses a more common driver such as the ili9431.
Recommended Products
$49.50
$ 25 .99 $25.99
$19.11
$ 7 .99 $7.99
$16.39
$ 7 .99 $7.99