Shopping Cart

Your cart is empty.

Your cart is empty.

3/4’’ Straight Air Piping Fittings, 3/4’’ x 1/2’’ Male NPT Threads Adapter Fittings, Seal Taped Needed, Brass-Nickel Plated, 2PCS For Shop Compressed Air Line System

Free shipping on orders over $29.99

$18.99

$ 9 .99 $9.99

In Stock

About this item

  • This 3/4’’x 1/2’’ Male NPT Thread air piping straight fittings feature a compression fitting style to make fast and easy connections.
  • Material:This straight air line fittings are made of nickel-plated brass for durability and corrosion resistance.
  • Sealing: Double O-ring compression style fitting, no glue, soldering or crimping needed, can be removed from fitting if needed.
  • Size: 3/4 Inch air piping size with 1/2 inch Male NPT Thread Size, straight air line fittings type 200PSI Working Pressure.
  • Easy to Install: Bevel the inside of the piping by inserting the reaming tool and rotating it. Remove nuts and split ring from fittings and place on piping; Push the fitting onto the piping and fully against the shoulder of the fitting; Turn the nut finger tight. Put a reference mark on the nut and fitting body; Tighten nut with wrench a minimum of 3/4 of a turn or until tight.



Product Description

air piping fittings
air pipping fittings

ANCIMOON 3/4’’ Straight Fittings, 3/4’’ Tubing x 1/2'’ Male NPT Threads Adapter Fittings

This 3/4’’ Tubing x 1/2’’ Male NPT Threads air piping straight fittings feature a compression fitting style to make fast and easy connections, Double O-ring compression style fitting, no glue, soldering or crimping needed, tubing can be removed from fitting if needed.

Item Compressed air pipe fittings
Fittings Material Brass
Finish/Coating Nickel-Plated
Specific Fitting Shape Straight Adapter
Application Air
Maximum Operating Pressure 200PSI
Pipe Size 3/4 Inch
Color Sliver
Connection Type Compression×MNPT
Resistance Properties Corrosion-Resistant

INSTALLATION

Air piping fittings

Cutting the tubing square with the cutter, Rotating wirst while cutting.

air piping fittings

Bevel the inside of the tubing by inserting the reaming tool and rotating it.

air piping fittings

Remove nuts and split ring from fittings and place on tubing.

air piping fittings

Tighten nut with wrench a minimum of 3/4 of a turn or until tight.


Customer
Reviewed in the United States on March 7, 2025
Works great on my Rapid Air system.
Don shepherd
Reviewed in the United States on February 9, 2025
Easy to use
Espinosa G.
Reviewed in the United States on February 13, 2025
Very well made, excellent quality
Robert Dixon
Reviewed in the United States on July 4, 2024
Everything as described super fast shipping. My air system has 175 psi and with 2 hose reels. No leaks very impressed with the compression fittings
TheBajan
Reviewed in the United States on December 30, 2024
Easy to install and no leaks
roadkingmoj
Reviewed in the United States on December 18, 2024
Works on tubing well! MPT threads tolerance loose and have to use lots of pipe tape to keep from bottoming out. Be prepared to purchase or make a very thin wrench to tighten into manifold due to loose thread tolerance you run out of thread before fitting tightens enough to seal and wrench gets caught between manifold and ridge right above threads.
Kevin krueger
Reviewed in the United States on November 17, 2024
Good
Salvador Torres Jr.
Reviewed in the United States on November 1, 2024
I bought a pressured air line system for my shop.. although he lines where relatively cheep the accessories are not.. these are a more affordable alternative. it's been a few months and they hold up well, I have a small slow leak somewhere in the system but it's manageable and it could be installer error..(my error) .. but like I said, managable..i would buy again if I need more lines added down the road.
Recommended Products

$38.20

$ 19 .99 $19.99

4.3
Select Option

$8.79

$ 3 .99 $3.99

4.4
Select Option