Your cart is empty.
Your cart is empty.
Product description
30 PCS High Performance Raspberry Pi Heatsink Kit Aluminum Heatsink for Raspberry Pi B B+ 2, 3, 4/5,Heatsink Copper Pad Shims, with thermal conductive adhesive tape.
Package Includes:
12 pieces - 8mm x 8mm x 5mm aluminum heat sinks
6 pieces - 14mm x 14mm x 5.5mm aluminum heat sink
6 pieces - 14mm x 5mm x 5.5mm aluminum heat sink
6 pieces - 15mm x 15mm x 1mm copper heat sink
Supported Boards:
Raspberry Pi models A, B, B+, 2, 3, 4 boards
Product Features:
30 pieces set of heatsinks for the Raspberry Pi models B, B+, 2, 3, 4.
Reduces CPU and LAN Temperature in Enclosed and Overclocked Environments.
Heatsinks are with thermal conductive adhesive tape on the back.
Can be used with other devices such as the Beaglebone to cool processors, regulators, etc.
These heatsinks are long lasting and have good performance on heat dissipation.
Notice: Heatsink kits are small parts, please keep out of the reach of children!
John Romesburg
Reviewed in the United States on February 8, 2025
They install easily and work great!!
kd5inm
Reviewed in the United States on September 3, 2024
Worked great for my raspberry pi's. I like to heat sink all the chips and add fans so they stay cool. Works great!
Shelby J. Denike
Reviewed in the United States on June 13, 2024
Multiple sizes to choose from, easy to apply. Good price for what you get.
David C. Rankin
Reviewed in the United States on March 1, 2024
I've used several types of heat sinks on the Raspberry Pi (3B, 3B+, Zero 2 W) and this unassuming bare aluminum set provides surprisingly good cooling. Even better than some of the more sophisticated looking annodized model. In fact, this set (the 14x14mm CPU cooler) provides a 3 degrees C improvement in idle temperature over other models I've tried. (Zero 2 W overclocked with over_voltage=4, arm_freq=1300, core_freq=500). The Pi with this heat sink idles at 37.6'C while the annodized competitor idles at 40.8'C.The thermal tape is good and provides good adhesion (just remember to firmly seat the heat sink on top of a clean chop and reseat once or twice over the next day or so)
Armando de Armas
Reviewed in the United States on December 3, 2024
Plenty of heatsinks, more than I needed and more for the price than competitors. Easy to install with the preapplied thermal tape.
Janet S.
Reviewed in the United States on February 3, 2023
The heatsinks themselves do what I expect them to do: radiate heat. They are also small enough that - while thermal glue is required to adhere them to a curved surface - it does not take too much of it.(As to why they are glued onto a lightbulb: The #1 reason for light bulb failure is overheating ruining the driver chip. I had enough left over after using them for their intended purpose (a Pi) that I figured I may as well. I have absolutely no idea if this will actually help, but there is at least no way this could make things any worse.)
Jason
Reviewed in the United States on April 5, 2023
All temps in Celsius.........Since you have to pull out a mortgage to get your hands on a RPI I settled on the OrangePi 5.I can verify that these "work" on it. The CPU sink is just a tad smaller than the CPU. But the memory sinks are spot on.As stated elsewhere, the adhesive tape they put on them is GARBAGE!Max'ing out all the cores the OPI5 will show temps in the 85 range without heat sink (but with a fan blowing straight at it). Adding the heatsink to the CPU with the garbage tape they supplied, it gets down to about 75. I peel the tape off, scratched away all the gooey residue, cleaned the contacts with a qtip and alcohol, and used some Arctic MX-4 compound I have laying around. Temps are now around 60-62 under full load.Could probably get down under 60 if these were a little bit taller. But for now, it seems like these are just light enough to stay stuck on with the grease.I plan to have my cluster built with them standing up on their side, so I will soon see if the grease is enough to hold them on. Will update if not. I'm thinking a day or 2 to let the grease set up.As for temps, I'd say with thermal paste these are just fine.
Chris
Reviewed in the United States on April 3, 2023
These are installed where I could on my Mac Pro and they adhered perfectly and months later they are still working great. I recommend this for anyone looking for those small little cooling upgrades to help cool any electronic device that they will fit.
Recommended Products
$39.95
$ 19 .99 $19.99
$27.98
$ 13 .99 $13.99