Your cart is empty.
Your cart is empty. Description
Four leads, easy to use,5-10V drive voltage applied, the force is directly output as a voltage change signal.
Dimensions: 12.7mm * 12.7mm * 80mm
Sensor through the screw hole at one end fixed and the other end to keep floating state, applying gravity following the direction indicated by label.
Particular attention must not directly push the white plastic cover part, so as not to damage the sensor.
Application: Kitchen scale
Module: YZC-133
Capacity: 1、5、10、20
Rated Output: 1.0±0.15mV/V
Nolinearity: 0.0005
Repeatability: 0.0003
Hysteresis: 0.0003
Creep(5Min): 0.001
Temperature Effect On Sensitivity: 0.003%RO/°C
Temperature Effect On Zero: 0.02%RO/°C
Zero Balance: ±0.1%RO
Input Resistance: 1066±20Ω
Output Resistance: 1000±20Ω
Insulation Resistance: 2000MΩ(50V)
Recommended Excitation Voltage: 5V
Compensated Temperature Voltage: -10~+50°C
Operating Temperature Range: -20~+65°C
Safe Overload: 120%RO
Ultimate Overload: 150%RO
Load Cell Material: Aluminium
Connecting Cable: φ0.8X180mm
HX711 Ad Module Load Cell Amplifier Green PCB for Arduino
Description:
●Two selectable differential input channels
●On-chip active low noise PGA with selectable gain of 3264 and 128
●On-chip power supply regulator for load-cell and ADC analog power supply
●On-chip oscillator requiring no external component with optional external crystal
●On-chip power-on-reset
●Simple digital control and serial interface: pin-driven controlsno programming needed
●Simultaneous 50 and 60Hz supply rejection
●Current consumption including on-chip analog power supply regulator: normal operation ●Operation supply voltage range: 2.6 ~ 5.5V
●Operating Temperature Range:-20 degree ~ +85 degree
Package included
2 X Weight Sensor 2 X HX711 A/D Module
ouzochat
Reviewed in France on January 24, 2025
Fait parfaitement le job avec une très bonne précision
Erik R.
Reviewed in Canada on June 14, 2024
Dimensions were correct, they're surprisingly close for calibration to each other outside the box. That possibly suggests fairly tight manufacturing tolerances.Do remember to accommodate for both silicone bumps and provide appropriate clearances.STL of 2020 mount could be made available
claude
Reviewed in Canada on November 9, 2024
I am using for coffee brewing as weight checking with auto shut off. Sensitivity and accuracy are good compare to the price. Highly recommend
Ulli K
Reviewed in Germany on November 7, 2024
Auch für kleine Portionierungen super zu messen damit
Drohn
Reviewed in Germany on November 12, 2024
Ich habe die Zelle für eine selbstgebaute Waage verwendet, die meinen Abfüllautomaten steuert. Sie ist sehr genau, es gibt keine Abweichungen zu meiner geeichten Kontrollwaage.
Recommended Products
$27.00
$ 12 .99 $12.99