Your cart is empty.
Your cart is empty.Product Description
Automotive-leader Brand
Our have own professional R&D design team dedicated to creating quality products, providing customers with affordable products and a good shopping experience. The Automotive-leader brand has cooperated with many foreign factories and use the OEM technical-support. After the development and processing by domestic professional teams, accuracy meet the OEM standard, making it easy to installation & direct plug-in replacement and use high temperature corrosion resistant materials can extend the life of the product.
Package Content :
2PCS (1*234-9062 Upstream+1*234-4359 Downstream) Oxygen Sensor
Vehicle Compatible :
Fit for 2009 Honda CR-V EX-L Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2009 Honda CR-V EXL Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2009 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2009 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2008 Honda CR-V EX-L Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2008 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2008 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2007 Honda CR-V EX-L Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2007 Honda CR-V EX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
Fit for 2007 Honda CR-V LX Sport Utility 4-Door 2.4L 2354CC 144Cu. In. l4 GAS DOHC Naturally Aspirated
There may be a gap of 1-3mm by manual measurement, please understand !
Interchange Part Number
- 234-9062
- 36531-RZA-003
- 211200-2461, 13982
- 36531-RNA-003
- 36531-RNA-A01
- 36531-RNA-J01
- 36531-RNE-A01
- 36531-RZA-013
Tips
Please confirm the part number and your vehicle information (e.g Year, Make, Model) & Engine before placing an order.
2349062 Specifications
Connector Gender : Female
Thread Diameter : 0.711 IN
Sensor Type : Heated
Wire Quantity : 4 Wires
Wiring Harness Length : 11.38 IN
Universal Or Specific Fit : Specific
Placement on Vehicle : Upstream, Front, Pre-cat
Interchange Part Number
- 234-4359
- 2344359
- 36532-RZA-004
- 36532RZA004
- 36532 RZA 004
- 36532-RZA-014
- 36532 RZA 014
- 36532RZA014
Tips
Please confirm the part number and your vehicle information (e.g Year, Make, Model) & Engine before placing an order.
2344359 Specifications
Connector Gender : Female
Mounting Type : Threaded
Sensor Type : Heated
Thread Diameter : 0.708 IN
Wire Quantity : 4 Wires
Wiring Harness Length : 19.88 IN
Universal Or Specific Fit : Specific
Placement on Vehicle : Downstream, Rear, Post-cat
Please check the fitment notes for Oxygen sensor installation location information！！！
Bank 1 Sensor 1 means Upstream Right/Rear; Bank 2 Sensor 1 means Upstream Left/Front
Bank 1 Sensor 2 means Downstream Right/Rear; Bank 2 Sensor 2 means Downstream Left/Front
sensor 1=Upstream sensor 2=Downstream
-Improve Fuel Efficiency & Reduce Pollution Emissions
Adhere to the refusal to use low-cost manufacturing materials that are harmful to human health, improve fuel efficiency, save fuel costs, and reduce emissions of pollutants and harmful gases.
-Stable & Powerful Performance
Our oxygen sensor is made of high quality stainless steel platinum pulp, porous polytetrafluoroethylene, fluororubber, alumina, high grade platinum, ceramics and other materials. The oxygen ion reaction is more sensitive, the light-off time is extremely short, the reaction is rapid, and it is less affected by water mist and stains.
-Nernst Principle & Optimized Engine
We have a professional team to study the design of smooth appearance, direct procurement of the original core chip, and high temperature corrosion resistant material optimized engine, performance more stable.
-Safe Escort & Extending Service Life
The service life of the optimized oxygen sensor developed by the professional team is stronger than that of the general oxygen sensor, reducing the cost of daily care and maintenance for customers.
Please Check The Three-way Catalytic Converter And Oxygen Sensor Before Replacing The Oxygen Sensor
- Light Fault Lamp
- Three-way Catalytic Failure
- Engine Oil Jams
- Oxygen sensor Probe Is Contaminated
Oxygen Sensor Poisoning and Contaminated Performance
- Lead Poisoning
- Silicon Poisoning
- Antifreeze Pollution
- Oil Pollution
Causes: Fuel additives or oil enter the engine for combustion.
Please Note
When the fault light is on,Please Check The Three-way Catalytic Converter And Oxygen Sensor Before Replacing The Oxygen Sensor.If the oxygen sensor fault light is on again shortly after the oxygen sensor is replaced, it is necessary to check for carbon contamination and clean the inlet and combustion chambers.
Bill Classen2
Reviewed in Canada on February 27, 2025
These are garbage a month after replacing they have both failed. Too bad I can give -VE 5 stars
Customer
Reviewed in Canada on February 16, 2025
Great alternative to purchasing Honda certified parts as this was much cheaper. Easy to install and product was as described.
Gill
Reviewed in Canada on February 15, 2025
Only one sensor worked and other one was bad didn’t work had to replace it
Karen Kacsandi
Reviewed in the United States on February 13, 2025
They work like they’re supposed to. Better than the junk that I bought on eBay.
Jhon P.
Reviewed in the United States on February 10, 2025
funcionan bien en una honda crv 2008 2.4lts
Richard Paredes
Reviewed in Mexico on January 30, 2025
Muy bien. Se ven de buena calidad, esperemos duren bastante. Funcionando al 100%
Osiris R.
Reviewed in Mexico on September 8, 2024
Es de buena calidad buen precio
Kash
Reviewed in the United States on September 3, 2024
Fit perfectly and no OS sensor light it has been over 2 weeks ! Great to buy from Amazon
Kerri Grabber
Reviewed in the United States on June 29, 2024
These went in my 2007 CR-V. The plugs are correct, the wires are the correct length, and they work.What I don't like: OEM sensors have rubber grommets where the wires get held out of the way. On these replacement items, the grommets are hard plastic and WILL NOT stay in the holders. I had to use zip ties to make sure they stay in place.
Eric Ha
Reviewed in the United States on December 6, 2024
Bad O2 Sensor especially the upstream cause my CRV to break down. Diagnositc, tow, replacement sensor and labor totaled to $1,500. I highly recommend just buying OEM....
JOSE RAMON MARTINEZ ROJAS
Reviewed in the United States on December 22, 2024
Lo compre para mi honda crv 2007 y listo se le apago el aviso en el tablero hasta ahora cumple
Fabio R Ramirez Mendez
Reviewed in the United States on January 22, 2024
Very good work
Stacy Binckley
Reviewed in the United States on April 18, 2024
Had on for a week and seems as good as OEM
Recommended Products