2Kit GT2 Pulley 20&60 Teeth 5mm Bore, Aluminum Timing Pulley with 2PCS Timing Belt 200mm Length 6mm Width, GT2 Synchronous Wheel for 3D Printer

2Kit GT2 Pulley 20&60 Teeth, with 2Pcs 6mm GT2 Timing Belt + M4 Allen Wrench for 3D Printer, CNC Machines (20-60T-8B-6 / 20-60T-6.35B-6 / 20-60T-5B-6)

ABOUT GT2 TIMING PULLEY KIT

• The GT2 Pulley Kits are made of aluminum alloy. It has a stable structure, high hardness, high precision, high temperature resistance, not easy to heat, higher speed, lower noise, and longer service life.
• As a rotating power generated by the motor, the GT2 synchronous belt wheels are usually widely used, and the synchronous trap and synchronous band are widely used for design.
• By GT2 synchronizing wheels, synchronous laziness wheels and synchronous bits of teeth to achieve the effect of drive, transmission and traction transmission.

GT2 TIMING BELT

1. About GT2 Timing Belt:

• GT2 Timing belt deliver high outputs thanks to their high-grade components. The excellent bond between the hard-wearing polyurethane teeth and the constant-length aluminum alloy tension members is the basis on which the high power output is potential is built.

• The very flexible traction transmission effect is particularly suitable for manufacturing double-sided belts and rear cams with a high degree of the dimensional accuracy, The range of compounds available also enables operation at the temperatures, in clean rooms and in the food industry.

HOW GT2 PULLEY KIT WORKS ?

(FAQ) Frequently Asked Questions About GT2 Pulley ?

1. Why does the flange fall off during the use of the synchronous pulley?

• The function of the flange is to prevent production accidents caused by the deviation and drop of the timing belt. Therefore, the main reason for the flange to fall is that the timing belt has been running off for a long time and the flange has been squeezed out. It is recommended that customers regularly check the condition of the timing belt of the equipment to avoid deviation of the timing belt.

2. What should I do if the timing belt shakes during use?

• Please re-adjust the timing pulley tension. The general situation is that the distance between the shafts is too long and the tension force is not enough, resulting in unstable operation of the belt.

3. Why can't the threaded hole of the synchronous pulley made of aluminum alloy be locked tightly?

• Since the aluminum alloy material is relatively soft, if the fastening force is too large during the locking process, sliding teeth may occur. It is recommended that the customer stop the tightening action once there is a feeling of obstruction during the tightening process.

The GT2 Pulley Kit is widely used in semiconductors, cars, smartphones, m e dical, electronics, electrical appliances and DIY handmade.

How to Correctly Install The GT2 Synchronous Wheel Transmission Device ?

• Turn off the power, remove the protective cover, the rotary pine motor's assembly bolt, the mobile motor makes the belt relax enough, you can remove the belt without prying open, do not pry the belt down.

• Remove the old belt and check whether there are abnormal wear. Excessive wear may mean problems in design or maintenance of the transmission device.

• Select the right belt replacement.

• Clean the belt and belt wheel, and wipe the liquid that is not easy to volatilizes in the rag. It is not advisable to soak the belt in the cleaner or use a cleaner to brush the belt. It is not advisable to wipe it with sandpaper or scrape sharp objects with sandpaper or sharp objects. The belt must be kept dry before installation and use.

• Check whether the strap wheels have abnormal wear or cracks.

• Check whether the strap wheels become straight -line symmetry. The rotation of the belt is very important to the operation of the synchronous band, especially the synchronous band, especially the transmission device.

What Causes The GT2 Synchronous Wheel Asymmetry ?

• Check the remaining transmission device components, such as symmetry, durability and lubrication of the bearings and axis.
• Install a new belt on the belt, never pry or excessively force.
• Tighten the central distance of the transmission device until the tension tester measures the tension properly. Turn a few laps by hand. Return to tension.
• Tighten the assembly bolt of the motor and correct the torque. Because any change in the central distance during the operation at the operation of the transmission device will cause poor belt performance. Therefore, it is necessary to ensure that all transmission device components have been tightened.
• Starting device and observing the performance of the belt, check whether there are abnormal vibrations, and listen to whether there are abnormal noise. It is best to turn off the machine and check the condition of the bearings and motors. If it feels too hot, it may be that the belt is too tight, or the bearings are asymmetric, or the lubrication is incorrect.