Your cart is empty.
Your cart is empty.Product Description
24V 100W LED Light Transformer
The 110 volt to 24 volt dc transformer is an electrical device designed to convert incoming electrical power into a steady and regulated output of 24 volts DC (direct current) at a maximum capacity of 100 watts.
Features:
- The Aluminum alloy metal housing ensures exceptional quality, facilitating efficient heat dissipation and guaranteeing stability.
- This waterproof LED power supply operates with a constant voltage style and accepts a universal AC input （110V/120V）.
- The 24v power supply is cooled by free air convection and is fully encapsulated at an IP67 level.
- 24v led strip light power supply comes equipped with automatic protection against short circuit, overload, over voltage, over current, and over temperature.
- The protection type is Hiccup Mode, with automatic recovery after troubleshooting.The Aluminum alloy metal housing ensures exceptional quality, facilitating efficient heat dissipation and guaranteeing stability.
Product Specifications:
- Input: AC90-160V 47/63HZ
- Output:DC 24V 4.2A
- Wattage: 100W
- Waterproof: IP67
- Working Temperature:- 20~+60 ℃
- Working Relative Humidity: 20%-90%Rh
- No Dimmable /Not suitable for constant current devices
- Material:Aluminum Hlloy Metal Shell
*** Questions & Problems ***
If you have any further questions or require additional information about our 24V LED driver, please don't hesitate to let us know via Amazon message. We are always here to assist you within 24 hours.
Warm Tips:
- Don't open or modify the 24V LED power adapter.
- Please leave children, kids far away from power source.
- Please use it under professional electrician's guides.
- Please kindly noted that the LED power supply is only suitable for 24V equipment.
Wide Applications:
- The IP67 Waterproof Outdoor Transformer is versatile and can be used for a wide range of applications that require a 24V DC power source, which is compatible with LED strip lights, LED light bulbs, MR11/MR16/GU5.3 spotlights, security cameras, CCTV camera, billboards, computer projects, industrial, outdoor lights, advertising signage, etc.
Important Notice ! !
- Please make sure the maximum power of your device ≤ Rating Power. It is recommended not to exceed 80% of the LED driver rated power, full load will affect the life of the power supply.
- The 24V LED light power supply is non-dimmable and don't support working with a dimmer or constant current lamp.
carl sanders
Reviewed in the United States on March 7, 2025
Works well great for what I used them for.
Customer
Reviewed in Mexico on March 7, 2025
Funciona muy bien
Sdub419
Reviewed in the United States on February 7, 2025
returned but never got my refund
J-who
Reviewed in the United States on February 27, 2025
Not used yet.
shotaker
Reviewed in Canada on January 8, 2025
I like everything about it
John W. Miller
Reviewed in the United States on January 6, 2025
Product works as intended and is very easy to install. No issues with becoming hot. Although I am using this indoors it looks like there would be no issues with outdoor use. Seems to be built well.
Customer
Reviewed in Canada on September 14, 2024
As advertised , compact , work well
Kelly
Reviewed in the United States on July 14, 2024
UPDATE: seller contacted me after reading my review and offered to refund my money. They didn't even ask me to send the supply back. Kudos to a good seller for having good customer service! I still don't know if my unit was defective, or just not the correct type of supply for my purpose (I needed regulated constant voltage, but the mention of LED use makes me think this might be constant current, but difficult to tell with limited/conflicting specs given -- both LED use mentioned as well as DC cameras, etc). So I raised to 4 stars since ultimately it didn't cost anything to try it, other than the time involved.Initial review:I planned to use this supply to drive 10 Buck/boost regulators (the model with adjustable current limit, Amazon part #B0781JC2WK) for up to 10 strings of LED garden lights that I am converting from solar. Power needs here are minuscule -- only 100mA per output, so 10 regulators, around 85% or better efficiency would still be very close to 1A total with all 10 strings used. With all 10 unloaded regulators connected, it seemed to work fine with a single strand of lights going (did this to adjust each regulator to ~100mA) but when I connected 5 strings to test half-max current and check heat levels on the regulators, it did some blinking on for a fraction of a second over and over thing like it couldn't handle with that much current. Maybe this type of supply is the wrong type for this use case? It mentioned being used to run security cameras, so I assumed general voltage regulation up to 2.5A was within its capabilities. I switched to my Meanwell 8A supply (Amazon B019GYOMN6) and everything worked perfectly, drawing a mere 350mA total current. So in order to not waste an 8A supply when less than 1A was needed, and to get a smaller one that would fit in the same enclosure, I ordered a Mean Well 12v 3A supply (Amazon B0180WDIKS).My instinct is to always use Mean Well supplies in my projects, and with the simple needs here, and the large number of positive reviews, I decided to make an exception for the sake of a nice weatherproof package and nice size that fit well in my enclosure, but it was a mistake. Something as simple as a 12v supply with less than 0.5A needed seemed like an easy enough task to risk it, but no. I won't ever use any unknown brand of supply on future projects, and I recommend the same for you. And really there wasn't any need to bypass Mean Well on this one, since the 3A weatherproof equivalent from Mean Well was actually the same price, within a dollar.
Joe Strahan
Reviewed in the United States on July 11, 2024
Used it on an LED light for my pool. So far it seems to work well and was easy to connect. Small enough to hide next to a downspout and seems to be good quality. Was much cheaper than the local hardware stores.
Jeff
Reviewed in the United States on May 20, 2024
I tied the two red wires together and the two black wires together to get 200W. The output appears to be around 12.1 volts on mine with no load. I use it to run a 12-volt SeaFlo 56A pump. So far it works well. It doesn't seem quite as strong (but close) as a fully charged 12v battery at 12.8 volts but works well. I've used it on/off for most of a day on the pump and things worked as expected.
Customer
Reviewed in the United States on December 9, 2024
Worked better than expected!
Whozyerdanny
Reviewed in Canada on December 28, 2024
Perfect for bright underlining kitchen lighting
Allan B
Reviewed in Canada on November 9, 2024
Real good component for a really good price
Recommended Products