Your cart is empty.
Your cart is empty.Steven Obriant
Reviewed in the United States on February 19, 2025
Good quality, easy to use, functional, good value
Steven Obriant
Reviewed in the United States on February 19, 2025
Good quality, easy to use, functional, good value
mike
Reviewed in the United States on February 13, 2025
Use to precisely oil my tools. Works well so far
mike
Reviewed in the United States on February 13, 2025
Use to precisely oil my tools. Works well so far
Ron Bussiere
Reviewed in the United States on May 23, 2024
I use a lot of these types of bottles in my gun maintenance and machine shop. Before I found this brand, I purchased some similar bottles from eBay. Problem was, although the needles were bent, there was NO way to secure them to the bottle top. They kept pulling out. No super glue I tried to keep them secured worked.These bottles have a needle 'lock' (just like Vet hypos") so that can't happen. I bought a bunch of these so I can throw the eBay bottles in the trash.ron
Ron Bussiere
Reviewed in the United States on May 23, 2024
I use a lot of these types of bottles in my gun maintenance and machine shop. Before I found this brand, I purchased some similar bottles from eBay. Problem was, although the needles were bent, there was NO way to secure them to the bottle top. They kept pulling out. No super glue I tried to keep them secured worked.These bottles have a needle 'lock' (just like Vet hypos") so that can't happen. I bought a bunch of these so I can throw the eBay bottles in the trash.ron
Sergio
Reviewed in Mexico on November 7, 2024
Llego a tiempo cumple con lo especificado lo recomiendo
Sergio
Reviewed in Mexico on November 7, 2024
Llego a tiempo cumple con lo especificado lo recomiendo
Mike
Reviewed in the United States on November 24, 2024
Like most disposable seldom-on applicators the weldon will eat away the solvent that holds the needle to the catheter that twist on the bottle. A simple dab of super glue where the needle goes into the catheter is all you need to keep the needle from melting out.
Mike
Reviewed in the United States on November 24, 2024
Like most disposable seldom-on applicators the weldon will eat away the solvent that holds the needle to the catheter that twist on the bottle. A simple dab of super glue where the needle goes into the catheter is all you need to keep the needle from melting out.
Patrick Lyman
Reviewed in the United States on November 14, 2024
Makes oiling very easy
Patrick Lyman
Reviewed in the United States on November 14, 2024
Makes oiling very easy
Donald Mcpherson
Reviewed in the United States on October 8, 2024
Works great for my alcohol that I use repairing phones.
Donald Mcpherson
Reviewed in the United States on October 8, 2024
Works great for my alcohol that I use repairing phones.
By JoJo
Reviewed in the United States on December 31, 2023
Can’t use them as they leak out of the top. Defeats the purpose of precision anything.
By JoJo
Reviewed in the United States on December 31, 2023
Can’t use them as they leak out of the top. Defeats the purpose of precision anything.
Michael
Reviewed in the United States on January 26, 2022
The bottles meet well my expectations on quality at the price point, and came with black PVC caps. The needle top cover is called a 18G scabbard cover/seal, and made of some semi-flexible material of either neoprene or Sanoprene. It is designed to make an airtight seal around the blunt type needle.As stated by others, the cap or luer lock (needle part) does not use or rely on any gasket seals whatever so. (which I think is common for applicator bottles.)A simple water test with some normal squeezing pressure, showed potential leakage around the caps and LDPE bottles. An extra tight twisting force to the cap is needed here to prevent this.The sealing around the Luer lock hub were good, although the Luer lock barely needs no force at all to unscrew, and the seal can be broken.Now for some laymen tips and not necessary manufacture recommendations:Some plumbers telfon (PTFE) Tape can be applied, anti-clockwise on the threads of the LDPE bottle, to help leak proof this area, should a bottle not perform as expected. This could also potential help ease the mechanical stress at the cap and could avoid cracked caps, that I’ve seen elsewhere happening, with these type of bottles.The needle hub could be glued into place, should a more permanent fixture be preferred.A lower viscosity acrylate adhesive, would be an ideal choice, if a needle separates from the hub, and you decide to fix it. Professionals typically uses medical grade UV curing acrylates to maximize the strength and fast cure time, but it is really not wide available to normal people.Needle tips are though also meant to be more disposal, and your are better economically to get replacements. Why the manufacture yet seem to me not offers needle replacements, at time of writing, is a little bit of a bummer.Long contact with aggressive chemicals such as acetones, fuel additives and so called halogenated solvents, are usually NOT smooth sailing with these type of bottles, as they will degrade the plastics or glue joints. They are actually that not really meant to stand a long lifespan, so expect to need new replacements, soon or later.Lastly, go get some water resistant labels. Don’t rely on guessing the content every time, and never skip this step when storing liquids, that could pose any type of hazard.
Michael
Reviewed in the United States on January 26, 2022
The bottles meet well my expectations on quality at the price point, and came with black PVC caps. The needle top cover is called a 18G scabbard cover/seal, and made of some semi-flexible material of either neoprene or Sanoprene. It is designed to make an airtight seal around the blunt type needle.As stated by others, the cap or luer lock (needle part) does not use or rely on any gasket seals whatever so. (which I think is common for applicator bottles.)A simple water test with some normal squeezing pressure, showed potential leakage around the caps and LDPE bottles. An extra tight twisting force to the cap is needed here to prevent this.The sealing around the Luer lock hub were good, although the Luer lock barely needs no force at all to unscrew, and the seal can be broken.Now for some laymen tips and not necessary manufacture recommendations:Some plumbers telfon (PTFE) Tape can be applied, anti-clockwise on the threads of the LDPE bottle, to help leak proof this area, should a bottle not perform as expected. This could also potential help ease the mechanical stress at the cap and could avoid cracked caps, that I’ve seen elsewhere happening, with these type of bottles.The needle hub could be glued into place, should a more permanent fixture be preferred.A lower viscosity acrylate adhesive, would be an ideal choice, if a needle separates from the hub, and you decide to fix it. Professionals typically uses medical grade UV curing acrylates to maximize the strength and fast cure time, but it is really not wide available to normal people.Needle tips are though also meant to be more disposal, and your are better economically to get replacements. Why the manufacture yet seem to me not offers needle replacements, at time of writing, is a little bit of a bummer.Long contact with aggressive chemicals such as acetones, fuel additives and so called halogenated solvents, are usually NOT smooth sailing with these type of bottles, as they will degrade the plastics or glue joints. They are actually that not really meant to stand a long lifespan, so expect to need new replacements, soon or later.Lastly, go get some water resistant labels. Don’t rely on guessing the content every time, and never skip this step when storing liquids, that could pose any type of hazard.
Recommended Products
$17.97
$ 7 .99 $7.99
$23.49
$ 10 .99 $10.99