Your cart is empty.
Your cart is empty.Product Description
240 Degree Replacement Motion Sensor
- Operations: TEST, AUTO, DTD, MANUAL OVERRIDE Mode, 10-second to 10 mins Time Delay
- Detection Range: Adjustable up to 60 ft.
- Light level to turn ON can be adjusted from 5 to 300LUX by LUX knob.
- Electrical Load: Max. 300W Incandescent Lamp. Max 72W LED DRIVER/ LED Bulbs
- Working Temp ℃: -30~50 ℃. IP65 Waterproof
-
Test Mode
Test the sensor’s functionality even during daylight hours.
-
Motion Sensor Mode
Automatically turn on when motion is detected and OFF after a preselected time delay
-
-
Manual Override Mode
Turn the wall switch OFF and ON within 2s, devices will keep ON for 8 hours, auto turn off at dawn.
Alice
Reviewed in the United States on February 8, 2025
Easy to install excellent quality. Works great. Very happy with overall performance.
Mike
Reviewed in the United States on February 3, 2025
I have had a Motion Sensor in this location (at the garage door) for many years. The initial problem with my prior Motion Sensor is that the outside lights would come ON with no specific MOTION actuation. I tried replacing with the same model that worked well for many years (same problem). As I said, this Motion Sensor works well !!!
Customer
Reviewed in the United States on February 3, 2025
Unit Works. My "old" unit had some adjustments, but the newer seems to behave more like the unit that is directly opposite on the other side of the house: different manufacturer. The new has a test setup that helps ensure that all connections were done correctly.
Michael T.
Reviewed in the United States on February 24, 2025
For the price this works awesome.I have been using free motion sensors that construction sites throw away but they are not built for outside.However, I have only had this for about 3 weeks. It usually takes more than a year for my free ones to start to fail. But this is designed to be outside, I do have it under my carport so it is getting some protection from Phoenix weather.I installed it, easy to install, I adjusted for time and sensitivity, both adjust perfectly and is very sensitive to the sides but not as far directly in front, but it doesn’t matter for my situation because my carport to door is about 25’ and at a 40’ range setting, it did not detect me coming out of the door but 60’ did.I want as much sensitivity as possible so this works for my needs. Much cheaper than some other motion sensors, you could buy 2-3 of these compared to other brands and still be ahead.I recommend!
Carpe Diem
Reviewed in the United States on February 22, 2025
I didn’t use this in the most conventional way—had to do a little MacGyvering to get it set up between my LED light and the outlet—but now, when I walk into my well house, the light turns on automatically. No more worrying about leaving it on when I leave! The adjustability is a nice touch, letting you fine-tune the timing and sensitivity. Just be prepared to tweak it a bit to fit your setup.
Complete Electric Llc
Reviewed in the United States on February 20, 2025
I had bought replacement in motion sensors at my local store and they were garbage. This one's got great range
Joe
Reviewed in the United States on January 29, 2025
This motion detector works fine and is easy to hook up to an existing light that has a broken motion detector. Just connect like-colored wires with the wire nuts. The stalk was the exact same size as on my existing light, so it fit my light perfectly.Just don't do what I did and assume the problem with your existing light is the motion detector, when in fact it was the light itself that was bad. I didn't discover this until replacing the motion detector with this one and then the light still didn't light. I then tested the light itself (bypassing the detector) and discovered the light was bad. When I hooked this motion detector up to the the broken light in test mode, I saw the LED blink on the detector which indicated it easily picked up my every motion from a good distance off. I then hooked up a volt meter and saw it was in fact sending electricity to the light, so the detector worked fine.I take one star off for the all-plastic construction, as I'd like to see metal at least on the stalk.
lehrer
Reviewed in the United States on January 10, 2025
I needed a way to turn my coach lights into motion sensor lights. By mounting this sensor on a weatherproof junction box in between both lights, I was able to achieve my goal with out replacing the two coach lights. The wiring and the set up were straight forward. Time will tell about the endurance of the sensor.
Recommended Products