Your cart is empty.
Your cart is empty.Product Description
Product use:
Solid Wire Kit- Jumper Wire- Hook up Wire Kit
Due to the UL 1007 PVC insulation and Solid core, The wire is very flexible easy to strip and solders . Well suited for applications where the wire will be flexed, like test cables.Solid Core Hook-up Wires are perfect for wiring circuits on a breadboard or protoboard, where movement is minimal. Solid core wires are easier to push into a breadboard and plated through holes of a printed circuit board
Tinned copper wire - protecting them from corrosion and making it easier to solder.Highly efficient - Super low impedance
16AWG：Outside Diameter: 2.3mm Wire Core Diameter: 1.29mm,withstand current 15A
18AWG：Outside Diameter: 1.9mm Wire Core Diameter: 1.02mm,withstand current 7.5A
20AWG: Outside Diameter: 1.7mm Wire Core Diameter: 0.8mm,withstand current 5A
22AWG: Outside Diameter: 1.6mm Wire Core Diameter: 0.65mm,withstand current 3.2A
24AWG：Outside Diameter: 1.46mm Wire Core Diameter:0.5mm,withstand current 2A
26AWG: Outside Diameter: 1.25mm Wire Core Diameter: 0.46mm,withstand current 1.5A
28AWG: Outside Diameter: 1.1mm Wire Core Diameter: 0.32mm,withstand current 0.8A
30AWG：Outside Diameter: 0.6mm Wire Core Diameter: 0.25mm,withstand current 0.55A
Tinned Copper Core
Strictly choosing top-grade tinned copper wiring, it is so easy to solder and will not rust/tarnish even it sits in on your bench for years. The Solid wire life is well enhanced. The copper wire with uniform thickness will not be hit or miss and has better safety performance .
Made of Solid Tinned Copper - The benefits of having tinned copper wire include protection against corrosion, ease of soldering, and providing the same conductivity as bare copper
Uniformly Coated with PVC
Uniformly Coated with PVC(Polyvinylchloride) - The uniform insulation makes the wire easy to strip and cut; The PVC insulation provides high flexibility, resistance to acids, oils, alkalies, moisture, and offers good abrasion resistance
Temperature Rating: -40 degrees C to 80 degrees C.
Rated Voltage: 300V
FLAME TEST: VW-1
Convenient Dispensing Box
other everyday projects;The wires are in a durable color-coded dispensing box that keeps the spools organized, easily dispensed, and tangle-free
Easy to Store & Easy to Use
In order to make it more convenient for customers, we have created a effective spool kit box that the wire can be stored and distributed. The wire can pass through the small hole of the box directly when using, cut length as much as you need, it will not be messy, and save more time. When you don't use the electronic wire, you can put the wire in the tool box, saving more space.
6 x hook-up wire rolls (black, white, red, blue, green, yellow)
6 Different Colored 13.2ft / 4m Each（16awg）
6 Different Colored 20ft / 6m Each（18awg）
6 Different Colored 26.3 ft / 8m Each（20awg)
6 Different Colored 30ft / 9m Each（22awg)
6 Different Colored 30ft / 9m Each（24awg)
6 Different Colored 33ft / 10m Each（26awg)
6 Different Colored 50ft / 15m Each（28awg)
6 Different Colored 100ft / 30m Each（30awg)
TUOFENG Technology Hook Up Solid Electrical Wire Kit
TUOFENG is a professional manufacturer of electrical wires & founded in 2014. We've been devoted to creating the better security products for consumers and business owners. Because the truly trust of customers, we have always maintained a high level of requirements for our own wires. Until now, TUOFENG has helped thousands of people from all around the world.
Our Solid wires have been widely used in various electronics projects in life or work, including building drones, RC planes, video transmitters, flight controllers, LED lighting, Solid Core Hook-up Wires are perfect for wiring circuits on a breadboard or protoboard, where movement is minimal. Solid core wires are easier to push into a breadboard and plated through holes of a printed circuit board.
Jack
Reviewed in the United States on February 22, 2025
I took a chance on this bundle of wires and have been quite pleased with my decision. The wires are thin yet strong, easy to solder and extremely flexible. Perfect for my project. I’m using all the colors equally and will buy again when I run out.
Electronics Engineer
Reviewed in the United States on February 13, 2025
Decent quality PVC wire with tinned copper conductor. Carboard dispenser is nice and rugged enough to last out the life of the wire. 22 AWG appears perfect for BB'ing. 20 too big, 26 too small. I have many of these in different sizes, nice system.
RichSad
Reviewed in the United States on February 1, 2025
I've bought these a couple of times. These are very useful for my use case which is using them with a breadboard or perma-proto boards. 22AWG is a good size for breadboard, although the connection can be a little loose for my tastes, but the next larger wire size is a little too thick. They are easy to solder and flexible enough.These are PVC insulated and not silicone. This makes them affordable and sufficient for my product development prototype phase. Just once I had a situation with a perma-proto board the insulation melted while I soldered the other side. This happened out of one wire segment of hundreds I've soldered so I don't consider that case a reason to go to more expensive silicone insulated.
Jody N.
Reviewed in the United States on February 1, 2025
This is a good set of wires for breadboard and perfboard work. Enough colors for differentiating signal types and gauge is good for breadboarding.
Wes S
Reviewed in the United States on January 23, 2025
Don't waste your money on those molded male male jumper kits. Buy this and roll your own.I bought an assortment of the jumpers with the crimped pins, the pins are rectangular, this wire is round and fits the contacts perfectly.Pull off a piece, cut, strip, your jumper fits nicely and doesn't look messy.
David Miller
Reviewed in the United States on January 22, 2025
I like fixing the broken dead outdoor solar lights ... often the problems are simply corroded wires, or bunk batteries that have the wires soldered to the ends and they end up pulling off the control board when opening the case. These wires allow me to replace existing wires as needed, and the solid core is preferable over the tiny stranded wire, both when stripping and re-soldering in place. Also use it when connecting multiple segments of LED lights when passing through unseen sections of the cabinets.
Mat
Reviewed in Canada on August 16, 2024
Good quality
Chaw Koh Yong
Reviewed in Singapore on May 23, 2024
Something useful for a quick patching on a breadbox. LIke the small holes in the box for threading the wires through. Brilliant.
C. Pehl
Reviewed in the United States on May 10, 2024
It's difficult to find smaller gauge wire that has a flexible coating that isn't silicone. As was expected, this wire has PVC coating and is a little more rigid than I would like but it works well overall. It works in crimp connectors nicely, I just worry about the pvc breaking over time.I work on older electronic equipment and there is something about the older wire where it is flexible but durable. Silicone is almost too flexible and it pierces/slices too easy.I like the dispenser box this comes in and I like the wire, good value for the money overall. I'm willing to pay for what I really want, I just can't find it.
Teo
Reviewed in the United Arab Emirates on December 22, 2024
Its very organized and helps with work
janet melville
Reviewed in Australia on October 16, 2024
22awg solid core wire is perfect for breadboards and the cardboard dispensing box keeps it all very tidy on the shelf.
Cavell Smith-Mason
Reviewed in Canada on January 13, 2024
Worked great for a doorbell run
Jitter Jaw
Reviewed in the United States on June 17, 2021
I purchased the 6 color set of 22 awg solid core wire, and overall I am extremely happy with the product!These rolls of wire are WAY smaller than I thought they would be, though! For some silly reason I thought each spool would be the size of a 1 kilogram roll of 3d printing filament, which is like 8"/20cm in diameter. instead they are a little under 2.25"/5.5cm in diameter. This is my mistake though, as when I look more closely at the other reviews the spools are clearly pretty small. It works wonderfully though, so no complaints there!The 22 awg solid core wire is easy to solder, the insulation is easy enough to strip off, and the wire is also sturdy enough to go into a breadboard easily, but flexible enough to be maneuvered where you need it.I think my only concern is that the insulation seems to degrade pretty quickly if you apply too much heat when soldering. I do wish I had read the listing more carefully, because it does state that the wire uses PVC insulation. My worry with this is that when PVC catches fire, it releases deadly hydrogen chloride gas into the air. Obviously it would be difficult to get the insulation to combust accidentally when soldering, but I still would have much preferred a wire with silicone insulation rather than PVC.Overall I am extremely impressed by this product! Any problems that I had were due to my own failure to read the listing and reviews before purchasing. I would definitely recommend this product if you are looking for high quality, affordable wire for your electronics projects!
Recommended Products