Awesome stuff. Highly recommended.

Now my go to monocoat for my woodwork items as slightly cheaper than Rubio. It’s a two part which helps it to cure pretty quickly, has good coverage, and a fantastic finish on different wood types

I am finishing wood for a she-shed that we are building on our property and I chose to try out a burnt wood finish. After burning to my desired color I was absolutely in love with the texture and subtle sheen of the bare wood, so I did TONS of research to find the best product to seal my wood without changing its appearance.I am SO glad that I found this hard wax oil finish!!!It went on smooth as butter and was extremely straightforward to apply. I was able to get all sides of the boards finished within the timeframe before the product became unusable. I am obsessed with how it turned out!!The ONLY note I would make is the smell. It absolutely has a distinct smell to it, and I highly suggest using gloves when handling this product because I couldn’t get the smell off my skin for days afterwards. It isn’t a bad smell to me personally, but my mother was very bothered by it. So just beware prepared for a smell no matter what the can claims for VOC’s.My attached photos show one board with this hardwax oil applied, and the rest bare wood that I had simply burnt and brushed to give an idea of how much it changed the appearance. It worked PERFECT for my project, and I adore how it darkened the wood a tiny bit, but if you are applying a lighter finish like a white wash I would probably look into a different product.

I decided to give this a try as I thought Rubio's oil was a bit too expensive for what I was doing. When I applied the oil, the charcuterie boards really popped, both the black walnut and epoxy. Easy to apply and wipe off, leaving a nice matte finished. I applied a second coat but not sure if it improved the sheen. The only thing, make sure you clean both lids after use has they are hard to get off once dried.

We make alot of Epoxy River Tables and Live edge Tables at our shop and have used Osmo polyx for 3yrs until l tried Natura Onecoat and loved it,so much easier to use with a beautiful shine,our new go-to.

Great for small areas but having just done a 220 ft² floor I have regrets. The fumes 7 days on are terrible and the finish is VERY matt. I preferred Liberon Hard Wax Oil by a mile.Wouldn't hesitate to use this on furniture as an alternative to Rubio Monocoat thoughEdit. The makers contacted me concerned about my comments. I supplied all the info, answered all the questions and even supplied images. Their conclusion was that it was poor application (!) or a fake product.Appalling attitude from them. Very disappointed.

(pictured: kitchen table, yellow cedar and black epoxy. finish: natura onecoat clear. coated once, left to cure, scuffed with a maroon pad, then coated again)I originally bought this product because I wanted a cheaper alternative to Rubio Monocoat. That is not what this finish is. This finish is its own thing, has its own sheen, its own look, and its own tint. I find that this oil is slightly darker and more amber than rubio. It's also less toxic than Rubio and more forgiving. The application process is simple, and can be boosted by using a buffer if you have one, but it's not required. The kitchen table in the pictures has stood up to months of abuse by my family (including 2 toddlers and a wife with ADHD) and still looks as good as it does the day I finished it.The sheen is more of a satin than semi-gloss, and it feels nice to the touch. It feels like a piece of wood still, and not like a piece of plastic or some composite. Some finishes make wood feel too much like melamine or harden the outer layer of wood fiber in a way that feels unnatural.I have also experimented with their stain + oil finishes and was pleased with how those look, as well. However, the clear version is my favorite because I want to bring out the natural figuring, burl, and depth of the wood grain without introducing stain.

First of all, let me state I’m relatively new at woodworking and finding a coating system like this has been a game changer. I had scheduled in a last-minute craft show for my products and had less than a week to produce enough products to set up my booth. After a few months of researching Natura Onecoat and a few of its competitors I was finally put in the position where I needed to finish multiple pieces in the matter of hours versus days. The results were absolutely amazing. After the first day of the show, I had sold quite a few pieces and needed to produce more that night in order to rebuild my stock. I was able to machine sand and finish over a dozen charcuterie boards, and other items all in one evening. Per their instructions I only sanded everything to 120 (well 150 because I ran out of 120) which only took a few minutes after my products came out of the drum sander. I was very nervous because I couldn’t wrap my head around how it was going to be a smooth finish once I applied their product. As promised after going through the proper steps of application, I buffed my pieces dry and the results were shocking. I was left with a beautiful satin finish that made the grain and color of the wood pop like I’ve never seen before. The compression curl in one of my boards had a 3-D effect And only took 15 minutes to do. This allows me to bring over $1000 more dollars in products between day, one and day two of the show. My customers were amazed of the quality of finish for the items that they end up purchasing. In all I was able to finish over $2000 worth of wood products and used just under a half of a can to do so. I would have spent dozens of hours over the course a few days to finish these products with industry standard finishes, such as poly. Instead, I was able to produce more products which is incredibly valuable to a small business.Secondly the customer Service of this company is absolutely amazing. I posted a question on their website about a specific use of their product that it wasn’t necessarily intended for. I didn’t just receive a email reply I actually received a call around 6pm from Turkey (3am there) from one of the creators and executives are the company. He was able to answer all of my questions and we had a great conversation about his product. Informed me there are some great things to be released that is going to be a game changer to woodworking, for that I’m really excited.So here’s my recommendation, pull the trigger guys and gals. Give this product a shot!! Not only is it extremely inexpensive for the amount of wood it covers, you will also be able to spend more time producing because you’ll have a fraction of the time spent finishing……. Time is absolutely money.And if you’re up in the air between these guys and the competitors that we all known the names of. Watch the video from the wood whisperer on his blind stress test of similar products. These guys win, hands-down, and still are a third of the cost.