Shopping Cart

Your cart is empty.

Your cart is empty.

2' and 3' Random Orbital Air Sander, Dual Action Polisher, Air Angle Sander

4.9 (10) Write Review
Free shipping on orders over $29.99

$33.60

$ 17 .99 $17.99

In Stock

About this item

  • Professional mini orbital sander with 2" and 3" hook and loop sanding pad (Velcro Backing pad)
  • Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
  • A built-in regulator in sander allows you to adjust the speed with which you work to satisfy your different sanding, polishing and waxing requirements, for quick and accurate results.
  • Different type of sandpaper can be installed with the different type of disc.
  • Smooth down hard surfaces or sharp edges with professional air random orbital sander.


Product Description

2" and 3" random orbital air sander Features:

  • Professional mini orbital sander with 2" and 3" hook and loop sanding pad (Velcro Backing pad)
  • Suitable for iron, wood, plastic, metal, rubber, stone, marble and other materials grinding, fine polishing.
  • A built-in regulator in sander allows you to adjust the speed with which you work to satisfy your different sanding, polishing and waxing requirements, for quick and accurate results.
  • Different types of sandpaper can be installed with different types of discs.
  • Smooth down hard surfaces or sharp edges with professional air random orbital sander.
  • This high quality 2" air sander with one extra 3" hook & loop sanding pad is a professional air tool for sanding, polishing, and waxing.
  • Low vibration rate and low energy consumption. It applies to auto bodywork and furniture and more.
  • Especially ideal for spot sanding focus areas.
  • Small Size, Light Weight, High stability, High Speed, Swirl free Super Smooth and Easy to one-hand operation.
  • With the adjustable valve of the air inlet, you can change airflow to control the sanding polishing waxing speed.
  • Rear exhaust can keep sander cool down quickly and make it work in a long time.
  • And also the rubber sleeve handle can make you hold comfortably.
  • Comfort-grip handle greatly reduces fatigue during use.
  • This tool is ideal for smoothing and blending body filler and feather edging before you begin painting.
  • Eccentric double-rotation polishing method to make the polishing effect more uniform and smooth.

2" and 3" random orbital air sander specifications:

  • Pad Size: 2" and 3" sanding pad.
  • Polishing method：Eccentric double-rotation.
  • Orbit Diameter: 3mm.
  • Free Speed: 15,000RPM.
  • Air Consumption: 12 CFM (336 L/min) @90 Psi
  • Air Inlet: 1/4" -19NPT. exhaust: Rear End.
  • Net weight with 2-Inches sanding pad: 1.61 lbs (0.73kg)

What's in the Box:

  • PROSHI brand angle orbital air sander 1 pcs.
  • 2-inches (50mm) hook and loop pad 1 pcs installed. 3-inches (73mm) hook and loop pad 1 pcs backup.
  • PIN 1 pcs use for replacing hook and loop pad.
  • Instruction Manual 1 pcs.
  • American standard 1/4 NPT quick connector 1 pcs.

2" and 3" random orbital air sander detailed

3-inches random orbital air sander

Kindly reminder:

Before you use the 2" and 3" random orbital air sander, please add 2-3 drops of oil from air quick connector and please allow the tool to run for a few seconds after filling to make sure it works well. (oiler not included in our box)

This tool is intended to be operated as a handheld tool and is air-powered. It requires an air compressor that will provide a clean lubricated air, where the air hose is connected to the tool when the tool is running.

Different angle views for 2" and 3" random orbital air sander

3" Pneumatic Sander

When using a random orbital air sander, the plane is facing the surface to be polished, and the correct grinding posture can make the machine run more smoothly and have a longer life...

3" Random Orbital Pneumatic Sander

The 2-inches or 3 inches hook and loop sanding pad easy replaced, that is lightweight and suitable for small areas of grinding and polishing

mini orbital sander

The speed adjustment knob at the rear can adjust the appropriate speed according to different purposes. The rear vent hole design is more conducive to heat dissipation

mini orbital air sander

Before use, add 2-3cc #60 pneumatic oil to the air inlet to make the fan blade better lubricated. the cylinder cooling then maintains the torque and delays the life of the machine

How to replace hook and loop sanding pad for 2" and 3" random orbital air sander

orbital air sander

Replace sanding pad step one

Find the small hole of the random orbital air sander. If you don't find the hole near the outside, use the PIN to hold the rotating block inside. Rotate it a little to find it, then insert it into the hole with the PIN.

pneumatic angle sander

Replace sanding pad step two

Hold the PIN, do not let the PIN slide, rotate the sanding pad in the direction of the arrow until the disk is removed from the angle track mill

Dual Action Polisher air angle sander,

Internal eccentric view for angle orbital air sander

You can find how is the structure for Internal eccentric view of a random orbital air sander

Pneumatic Sander for auto sanding

Replace sanding pad step three

Continue to withstand the PIN, do not let the PIN slide, according to the direction of the arrow in the picture, installing the new sanding pad to random orbital air sander

3 inches Random Orbital Air Sander

Instruction manual for 2" and 3" random orbital air sander

  • Please check off all tightening parts of the tools to be in good condition before operation.
  • Working pressure to be 6.3 kg/cm3 (90PSI) at operation.
  • Please refer to Figure 1 for the tool installation. To install a filter and a lubricator/oiler at an air outlet
  • The best hand stress on the tool is from 5Kg to 7Kg when operation.
  • Release the air supply when replacing the sandpaper or the backing pad.
  • Wear protection glasses, eye protector, dust mask and gloves at operation.
  • Have a short break in every 30minutes to avoid any possible injury due to tiredness.
  • Do not have free rotating at high speed to avoid possible injury to the human body and possible tool damage.
  • Do not touch the rotating part of the tool with your hand or your body at operation.
  • Start your sanding job after you fit the sanding pad flat on the surface you are working on. Please refer to Figure 2.

inRoutine maintenance for 2" and 3" random orbital air sander

  • Stop your Job when finding any irregular sound or vibration at operation and then check and repair the tool.
  • Because you are using clean compressed air at operation. Use an air filter at the air installation to clean the dust out of the compressed air.
  • Drop some Oil to the inlet of the tool and then run the tool slowly for a minute and finally start your work...Auto Lubricator/oiler is recommended.
  • Any dirt dust inside the motor may result in slow rotation even block running, at this time, try to drop some oil from the inlet, see whether solve the problem or return to the seller for maintenance.
  • Do release the water out of the air compressor and air hose after an operation.
  • Maintain tools with care. Keep tools clean for better and safe performance, follow instructions for lubricating. Inspect tools cords and air hoses periodically, if damaged, have them repaired by an authorized technician.

Blaze
Reviewed in the United States on March 6, 2025
Ended up giving it to a coworker because the trigger is either on or off. Overall a decent sander for what you pay, I just couldn't get past the trigger personally. Would work well for a hobbiest or possibly a woodworker.
Steve L
Reviewed in the United States on February 18, 2025
This is a nice light weight sander we use for reconditioning automotive headlights. works perfectly and doesn't fatigue my wrist.
bclong
Reviewed in the United States on February 13, 2025
have used this unit for home repair and renovation, very good product even after hard and prolonged use.
Roger Aubry Exp
Reviewed in Canada on February 1, 2025
WORK LIKE A CHARME, I USE TO SAND SMALL pieces of wood veneers
Cole Weydert
Reviewed in the United States on January 14, 2025
This has been the best purchase I’ve made, with it being super cheap, I’m not worried about it breaking or anything. Obviously it works great for tight or small spaces, just keep it oiled and it won’t give you any problems.
patty
Reviewed in the United States on September 26, 2024
It is great
The Man
Reviewed in the United States on October 10, 2024
Used it to sand a panel on my car, from removing rust to polishing out clear coat. Worked great
TJohnson
Reviewed in the United States on January 20, 2024
The big pull to get this was the price and it didn't let me down. This is definitely a good value purchase. It feels heavy and well made and does the trick. There is a setting on it to speed or slow down how fast it turns.
Pakin
Reviewed in Mexico on June 15, 2022
Funciona mientras no aplicacas un poco de presión en la zona donde requieres el trabajo, al más mínimo contacto con la superficie deja de girar
mark hepburn
Reviewed in the United States on January 21, 2020
Poorly machined quick disconnect fitting that no amount of Teflon tape could remedy left it leaking like a sieve and so I couldn't use it. I returned it. I'll say that it was pretty heavy feeling and looked like good build quality overall. But really, really poor QA leads me to be unable to give a better rating.