Shopping Cart

Your cart is empty.

Your cart is empty.

1Mii 2.4GHz Wireless Audio Transmitter and Receiver,192KHz/24bits HiFi Audio, 20ms Low Latency,328ft Long Range Wireless Subwoofer Kit for Speaker/Stereo/Soundbar,Optical/Coaxial/3.5mm(RCA) Ports.

Free shipping on orders over $29.99

$59.99

$ 28 .99 $28.99

In Stock

About this item

  • 【Multiple Flexible Connection,Wide Compatibility】1 Mii wireless audio transmitter and receiver equiped with optical port,coaxial port and 3.5mm jack(also product come with 2 RAC to 3.5 male audio cables) input and output.It can be connected to any stereo equipment, speakers, soundbar, subwoofers. Coaxial cable not included
  • 【HiFi Lossless Audio Quality & 20ms Low Latency 】The wireless audio transmitter is equipped with 192kHz/24bit high-resolution audio technology,clear and stable with no noise, which exceeds the sound quality standards of traditional CDs.And with the stable 2.4GHz wireless technology,the wireless coaxial transmitter realizes ultra-low latency of 20ms for audio transmission,really achieveing the audio synchronization. it will ensures the ultimate entertainment experience when you listen to music at home or in the office. NOTE:When the audio is low, there is a noise and its subtle.
  • 【328FT Working Distance】The 1Mii wireless speaker transmitter and receiver with antenna has an outdoor working distance of up to 328ft and an indoor distance of up to 100-200ft (30-50m).
  • 【Plug & Play and Easy to Use】The 1Mii wireless subwoofer adapter can be connected wirelessly to TV, computer, DVD player, MP4 device to power speakers, amplifier, soundbar, home theater system or stereo speaker. Easy to use, connect the transmitter to your TV and the receiver to your home stereo and then plug both into a power source. The wireless speaker conversion kit will automatically turn on and connect.connect. Note: not support HDMI.
  • 【Remove Cable between Audio Devices】If you are using home speakers or backyard speakers to enjoy music, and you don't want to have a lot of wires to connect, this wireless audio transmitter receiver can help you to solve this trouble, realize the connection between subwoofer, CD player MP3,speakers wirelessly.
  • 【Warm Tips】This bluetooth transceiver set has been paired during production and cannot be paired with other bluetooth transceivers. It is best to only plug in one type of audio cable(Optical/Coaxial/3.5mm(RCA)). When all the cables are plugged in, the audio will automatically switch to 3.5mm RCA audio output. You need to check that the transmitter's audio cable is plugged into the TV/computer's audio output, not the input. The receiver is plugged into the speaker's audio input, not the output.



Product Description

Multiple connection ports available

wireless audio transmitter and receiver

Wireless Audio Transmitter and Receiver provide optical port,coaxial port and 3.5mm jack(also product come with 2 RAC to 3.5 male audio cables) input and output.So it is very convenient to connect to your stereo equipment, speakers, soundbar, subwoofers.

328FT Long Working Range

328FT Long Working Rang

With 2.4GHz technology the wireless speaker transmitter and receiver working distance can reach 328 feet (100m) outdoors and 100-200 feet (30-50m) indoors.You can enjoy music throughout the house without worrying about audio loss or cut-out.

Wireless Audio Transmitter Receiver

High-Quality Transmission

CD-level sound quality, enjoy high-quality audio up to 24bit / 192kHz.

wireless transmitter receiver

2.4GHz Ultra Low Latency

2.4GHz wireless technology brings a delay effect of less than 20ms.

wireless audio receivers & adapters
wireless subwoofer adapter
wireless subwoofer kit
  • Please confirm whether your audio source has Optical, Coaxial, RCA or 3.5mm AUX audio output interface. And please confirm whether your audio system has Optical, Coaxial, RCA or 3.5mm AUX audio input interface.

  • If your device has an RCA or coaxial interface, since the package does not come with coaxial audio cable, please purchase them separately.But we have provided two RCA to 3.5mm cable for your transmitter and receiver.

  • If your audio source device is a subwoofer or powered speakers, it will work fine. If it is a passive speaker, please connect the receiver to the amplifier, and then connect the amplifier to your passive speakers.

  • Please reset the transmitter/receiver: Press and hold the small hole of the transmitter (receiver) with a needle or sim card pin for 2s until the indicator flashes blue slowly. Wait until the indicator turns blue-pairing is successful.


A. Tan
Reviewed in the United States on January 9, 2025
It's weird but it worked on some apps but not all like Disney +I don't have cable but I have YouTube TV. It worked there and I didn't notice any delay in sound. Unfortunately I had to return it since it didn't work on all apps. I don't want the hassle of unplugging/plugging it each time I switch apps for viewing.
egratteau
Reviewed in the United States on January 6, 2025
I relocated my television to another wall away from my stereo components and needed a way to still enjoy my built in surround sound ceiling speakers. These little units come with EVERYTHING you'll need. I used the optical cables from my TV and to my Yamaha receiver, but I'll likely change to coax due to the higher bandwidth. I plugged each unit in and they paired automatically in about 2 seconds. It transmitted perfect stereo sound with no latency, or sound degradation. These performed flawlessly! They are built well with an aluminum case and a single indicator light. The power button is aluminum and it has a solidly built and adjustable antenna. My transmission distance is only about 12-15 feet, but I didn't have to buy and pull cables through the ceiling and walls. It requires you to set your TV to PCM digital output, so I know I don't get actual surround sound, but I still enjoy a greater sound experience through my stereo. There are HDMI transmitters, but they cost much more. For a living room these are great. Spend more if you want a true theater experience.
Doug F.
Reviewed in the United States on January 19, 2025
I switched TV service from Spectrum cable to DirectTV via internet. The HDMI cable I ran from Den thru my attic to my TV mounted on wall in kitchen no longer passed audio. This device solved the problem by using the Optical output not being used on the Den TV to the Optical input on the sound bar under the TV in the kitchen….WIRELESS ! So, I don’t have to buy new TVs yet for the Den or the Kitchen. Well worth the money it costs!
Ama Zoon
Reviewed in the United States on January 14, 2025
This was my final attempt after trying 2 other transmitters. I needed an optical transmitter and this worked great out of the box. synced right up and very little lag. Sound quality is good transmitting to my Yamaha receiver. I had new construction and ran all my lines prior to realizing I forgot the optical cable to my cabinet in the garage. I was leary about getting a wireless transmitter but had little options without tearing walls apart with spray in insulation. As mentioned tried two other ones prior and were horrible. Have been using this unit for a few days now with no issues. Would recommend.
seekinsp
Reviewed in the United States on September 5, 2024
I had the opportunity to test this in a historic cinema theater that we are retrofitting for a multi-use building. We needed to connect a sound source from the stage to the projector booth that was approx 80ft away and this performed flawlessly with no perceived latency or drop in sound quality. I can only comment on line of sight, but I was extremely impressed with the performance. Also I didn't experience any interference with the 2.4ghz wi-fi router that was positioned a few feet away from the receiver in the booth. Highly recommended.
S. Pupp
Reviewed in the United States on September 17, 2024
Rather than route 30 feet of optical cable around the room from my home theater PC (HTPC) to my digital to analog converter (DAC), I opted to try this wireless optical/coaxial receiver/transmitter set. The set transmits stereo PCM signals, so the output device needs to be set for 2 channel PCM output; 5.1 surround sound is not supported, and neither is SACD (Super Audio CD). I used a DVD-audio/SACD player as well as JRiver Media Center from the HTPC as audio sources, and a Benchmark DAC2 HGC as the digital to analog converter. The Benchmark DAC2 displays the bit depth and sample rate it is receiving, and I compared the bit rate and sample rates from the sources to those the wireless receiver fed into the DAC.The set comes with a pair of optical cables, a pair of 1/8" stereo to RCA cables, and a pair of 1/8" stereo to 1/8" stereo cables. It does not come with digital coax cables, but these can be obtained inexpensively if needed. The set also includes two USB-C to USB-A cables and two USB-A power supplies. A user manual and troubleshooting manual are included.The manual states that the frequency used is 2.4GHz, and so should not be used close to a wireless router since it may interfere. The troubleshooting guide states that walls can interfere with the signal transmission of the audio signal.Upon turning the transmitter on, its LED flashed blue and red. Upon turning on the receiver, both turned blue after about four seconds, indicating that they had paired successfully.Using the optical and coax connectors, the sound quality through my DAC was excellent. I was unable to hear a difference between using this device and connecting directly to the home theater PC or DVD-audio player.There were two issues with these devices, however, that keep it from getting 5 stars:1) Via the analog audio output, there was audible background noise.2) The transmitter converted all digital signals to 24bit/44.1kHz, whether a CD quality (16bit/44.1kHz) or DVD-audio quality (24bit/96kHz) piece was being played. More attuned ears than mine might hear a difference. I could not.I'd recommend this as an alternative to anyone who needs to transmit a stereo audio signal across the room via optical or coax cabling, with the caution that, if all samples of this item are like mine, the bit depth and sample rate will be changed to 24bit/44.1kHz.
FANFAN DENIZE
Reviewed in the United States on September 12, 2024
Update*****Was returned because I needed 2 transmitters and 1 receiver instead. They're still working without any problems. Great product!Like the simplicity of the Bluetooth connection, the sound, no cracking at high volume. I don't know how long it's going to last, but I like it.
sami
Reviewed in the United States on December 16, 2024
Distortion and lost output than wired connection 30% low volume than wired connection setup is easy just in second also provide all necessary wires but the main concern is outputUpdate So as talk with seller in December agree to refund but i didn't get when i ask again now seller told after sale i can't help you
Recommended Products