Your cart is empty.
Your cart is empty. Specifications:
Brand new
Package includes: One pair of LED turn signal / side marker
Lens size: 4.7CM*3.2CM (1.85"*1.26")
Lens Color: Smoke
LED light Color: Amber
Number of LED: 15 pcs for each lens, total 30.
Voltage: DC 12V
Wattage: total 5.4w
Cable Length: 30CM (11.8")
Thread Diameter: 9MM
Thread Length: 1.5CM (0.59")
Weight: 90g (0.20 lb)
Material: ABS plastic thread, PC plastic lens
2 wires connection system.(Load Resistor may Required, Not Included with the Package)
Features:
High quality PC plastic lens.
30 LED provide maximum visibility & safety.
Top Quality LED with 100,000 hour life expectancy & low power consumption, longer lasting than conventional lights.
Upgrade your old bike with this new Custom Design
Get the unique look & outstanding impression!
Weatherproof and 100% Rust Free.
Our LED light are guaranteed to be the highest quality.
Easy Installation, Direct Bolt On
Minor Modification May Required for Some Models
Fitment:
Fitment: Replacement for Sport bike,racing bike as Suzuki, Honda, Yamaha, Kawasaki. Do not fit Suzuki 750 Katana 2001
Fits all mounting on Fairing with 9mm bolts fitting
Please Read All Description and Fitment Before Ordering the Product.
Please check your thread size and fitting before ordering the product.
Not D.O.T. approved. For off road use only
tim powell
Reviewed in the United States on February 24, 2025
Good item
Martin M
Reviewed in Canada on February 20, 2025
Easy to install. Stylish. Very durable. I used them for front signal lights on my Yamaha Wolverine side by side. My community has certain streets that allow ATV traffic to access trails, supplies and fuel. Better than sticking your arm out, especially if caught in rain.
Ethan V.
Reviewed in Canada on February 1, 2025
I bought this package to fix one of the blinkers on my 2015 Yamaha R3.I previously already had these blinkers installed but one of them got damaged and needed to be replaced, these were exactly what I needed. Extremely simple process to swap and install.However the wires from the blinkers and the wires running into my bike were different colors so make sure you know which goes with which, otherwise you may blow a fuse. (Unfortunately speaking from experience.)Thankfully I was able to just cross reference with my other blinker and copy it.For reference, my bike was BLACK wire to RED wire, and YELLOW wire to Brown wire.
Jim
Reviewed in the United States on January 2, 2025
The Good, light weight, brightness is ok but not super bright.The Bad, Cheap Plastic, no protective wire sleeve as in photo.The Super Bad, the plastic threaded post built into the light is a course thread. The supplied plastic nut is a finer thread. So with the mismatched threads, the two parts will not tighten down. If you choose to, it will strip out one or both parts. So for me they are unusable for the project I bought them for. They are too cheap to return and will hold onto them most likely until another use comes up.
Peter.campbell
Reviewed in Australia on July 25, 2024
The company was unbelievable on delivery there not installed as of the moment but 100 percent on the quality just by handling them very impressed do need more for project if you see them cheaper just make sure there the same
Customer
Reviewed in Canada on June 28, 2024
The photograph showed a black backing and what I received was a white backing. The wig is clearly visible once installed. Not worth the aggravation to return it. Thanks.
Joshua Brown
Reviewed in the United States on February 13, 2024
Bright for what I needed them for! Came with washer nut to hold steady on what your mounting it to with a seal to keep with 100% water proof. A little smaller than what I had hoped for but it did its job.
Customer
Reviewed in the United States on October 4, 2024
Mounted these on a klx 300. Turnsignals are sealed well and mounted securely. Would buy again.
rickster
Reviewed in Canada on January 14, 2024
Full plastic unit , not as described in pictures , cheap construction , I don’t recommendBarely visible in day light
capncraigagain
Reviewed in the United States on May 3, 2018
I added one set of these on my 2005 Jeep TJ after replacing the front fenders. They worked pretty well, but I figured that two on each side would show up better in daylight. The only problem with the LED lights is that the low voltage and resistance causes them to "Hyperflash". There are two remedies for this problem. The most common is to add a 60 watt resistor in the circuit on each flasher. The easier alternative is to replace the flasher relay with one compatible with LED signal lights. I bought the Tridon EP26 relay on Amazon for $12.50 and it cured the disease. It works with LED and incandescent flashers also.
Adam Harrah
Reviewed in the United States on February 7, 2017
I really like the book and style of these LED lights. I think they turned out great on my motorcycle. However, they are made from a very cheap plastic. Well hand tightening the nut the threads cracked and started to separate from the body. They're also not very bright. On very bright days they might be a little difficult to see. I wish the plastic was clear, and not smoke colored, but I could not find any like that.
Benjamin A. Lyon
Reviewed in the United States on February 26, 2017
I love the look of the lights,they fit very shallow on my 2005 Suzuki SV650s. Have yet to attach the electrical as it seems the pins on the signal wires are bigger the OEM pins, so I can't comment on their brightness or functionality yet. The plastic housing is very dark, and you will need to remove a plastic washer in the cowling to get it to fit, but definite aesthetic improvement over the "hammerhead shark turn signals" . * update* pins on the signals don't match OEM pin, so you will have to do some modification.
Intelli-Media
Reviewed in the United States on March 14, 2015
Bad First: It might have not said so, but these lights ship from China and they will take a few weeks to get. For as many as they sell, they would be way better off to sign up with Fulfillment By Amazon. I will not deduct a star for that, just something buyers should know that I did not notice when buying.The Good: Lights are exactly as described, not super bright but bright enough. They are pretty small but have a lot of leds in them. Easy to mount and come with enough wire to make the job easy. I'd buy them again.I've also included some pics if that helps.update 3/16:something I noticed on some rider forums; a lot of people complain or whatever about hyperflash after installing led indicator lights - some people say to put a resistor on each light (4 resistors).. don't listen to them!IF you have a hyperflash issue with your LED indicators you only need to upgrade your flasher itself. It's a square little fuse looking thing strapped to the frame somewhere, normally near the battery.Something like this:http://www.amazon.com/3-Pin-CF-13-Electronic-Flasher-Signal/dp/B008C9YJ6C/ref=sr_1_3?s=automotive&ie=UTF8&qid=1426483350&sr=1-3&keywords=led+flasher+relayI RIDE:2003 ninja 500r (ex500) and the indicators flash as normal running these lights.
Recommended Products
