Your cart is empty.
Your cart is empty.
Specifications:
-Name: 12 LED Lighting System Kit
-Material: Plastic
-LED bulb quantity: 12
-Working Current: 100mA
-Input voltage: 4.8V - 6.0V
-Lights color: White, red, yellow, blue
-Connection method: CH1 - Servo
-CH2 - Speed controller
-CH3 - Receiver
-Suitable for: 1/10 RC cars
-LED cable length: about 300mm
-Circuit board size: 53 * 33 * 15mm
-Weight: 57.2g
Lights Description:
-Headlights: 4 white LED lights
Connect the lighting system to the CH3 on receiver: the transmitter can independently control a group of lights, another group of lights are on when the car speed up;
Not connect to the CH3 on receiver: 1 group of lights are always on, another group of lights are on when the car speed up.
-Turn lights: 4 yellow LED lights
With the remote control change the direction, the lights will synchronous flashing.
-Taillights: 2 blue LED lights, 2 red LED lights
The blue lights are always on. When the car speed up or brake, blue lights will go out. Only when brake, the red lights on.
Please note:
-The light can only work with the light box, and it cannot be unplugged and powered on alone.
-All the 12 LED Lighting System Kit are tested before we shipped out. If there is any problem when you use it, please don't heasitat to contact with us.
Installation Method:
-CH2 Transmitter
Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1 and CH2 to receiver.
-CH3 Transmitter:
Connect the plug of servo and ESC to the CH1 and CH2 on lighting system, and then connect the CH1, CH2 and CH3 to receiver.
Package list:
-1 * 12 LED Lighting System Kit
Charles Rhea
Reviewed in the United States on January 7, 2025
Mst have been wired wring blinkers in different slot Same as the brake clearance lights never worked Poor quality.
Atahwalpa
Reviewed in the United States on September 13, 2024
Good
Customer
Reviewed in the United States on July 3, 2023
Been using this brand for a while and not had a single problem with them there easy to set up and use.
Savannah falkenburg
Reviewed in the United States on March 24, 2023
Wires are about 4 inches to short on the redcat gen8. I added some wire and it looks great. Turn signals, brake, reverse, high and low beam light. Happy with the finish product. Just have to have some patience’s.
Customer
Reviewed in the United States on April 19, 2021
The item does not work properly brake lights don't work and there's no hardware to install. I wanted to return it but had to move .
Vionisia
Reviewed in the United States on September 16, 2020
My husband installed this light kit on his RC car. It was somewhat easy for him since he knows how to use wiring and other DIY methods and products. I am knowledgeable on wiring but do not want to attempt this. I am having him install these lights on my RC car for me next. I do not have the patience nor enough know-how for this. If you are capable with wiring or are patient and willing to learn this skill, then it is not too difficult to install.Otherwise, the lights are bright, the turn signals and the break/reverse lights work as advertised. My kids, my hubby, and I get a kick out of seeing the lights work on his RC car as they do on our car.
Joe S.
Reviewed in the United States on March 12, 2020
The price was right and I wanted to add lights to my 1/10th scale Rock Crawler a Redcat Gen 8.The kit comes with no instructions and the description printed on the light unit itself is almost impossible to decipher. I hooked up the unit to my steering servo and ESC and then mapped out the functions by plug (there are 12 plugs on the box). Some made sense (headlights, turn signals) but the others were just weird. Ther eis a set of clear lights that only turn on when the car is going fast. There is also a set of blue lights that are on until you speed up. I thought i could use them for fog lights, but then I realized the 'Brake lights' were really only on when the car was in reverse, so I swapped the blue leds for clear ( the 'go fast lights) them as backup lights instead.As I said, the headlights and turn signals worked out okay. I ended up not using the 'on when go fast' lights at all.I am pretty happy with my results and my truck looks much cooler, but holy crap, whoever designed this light unit must have been high on crack!There aren't many other units that I found and all seemed to have their faults and were more expensive. I felt this was a good compromise.Warning, you will almost certainly have to buy some servo extenders in order to have enough slack to get your body off your car. you will need 4 of them. Also, the light kit comes with no mounting hardware. Luckily my Redcat came with the mounting kit for the leds. I used some sticky back velcro to mount the control unit.All in all, I am happy with the unit, but it could have been a lot better!
Thomas S.
Reviewed in the United States on April 29, 2020
Easy install.... picture instructions are easy to follow or look it up on youtube. Love the way the blinkers work when turning. For the price you cannot beat this product. A must have for any car!!!!
Recommended Products
