Shopping Cart

Your cart is empty.

Your cart is empty.

10PCS Oxygen Sensor Socket O2 Removal and Installation Universal Puller and Removal Tool Includes Thread Chasers, Oxygen Sensor Sockets, an Injector Socket and Oil Sending Unit Sockets

Free shipping on orders over $29.99

$49.99

$ 25 .99 $25.99

In Stock

1.Size:10pcs


2.Color:Black


  • 【High Qulity】Made of high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust and corrosion.
  • 【Size】 7mm slot, 7/8” (22mm) x 6-point x 3-1/10” (80mm) length, 3/8 inch square drive for use with ratchet. Fits all standard oxygen sensors with a 7/8” hexagon nut.
  • 【Design】Standard 6 point with low profile and 8mm x 64mm side cutout design to enable you remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard to reach spots.
  • 【USE】 Built for use with 3/8” ratchets, 1” wrenches, and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicle, even if you don't have a lot of experience working with cars. This high quality tool can save your time!
  • 【Service】100% satisfaction guarantee, If you have any issues with the oxygen sensor socket, simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you.



Product Description

Oxygen Sensor Socket

A ABIGAIL Oxygen 02 Sensor Socket 10-Piece Tool Kit – Thread Chasers, Oxygen Sensor Sockets, an Injector Socket and Oil Sending Unit Sockets

Standard 6 point with a low profile and slotted design to enable you to remove oxygen sensors with the wiring harness still attached, and the socket is offset and compact which allows extra leverage even in hard-to-reach spots.

Built for use with ratchets and breakers bars to remove and install oxygen sensors and hex vacuum switches on vehicles, even if you don't have a lot of experience working with cars. This high-quality tool can save you time!

Features:

  • Material: Chrome Vanadium Steel
  • Suitable for oxygen sensors found on most modern vehicles
  • Cut-out and slots enable sockets to be fitted over a wiring harness
OXYGEN SENSOR

Package Includes:

  • 27mm 3/8-Inch Drive 1-Inch & 1 1/16-Inch Oil Sender Unit Socket
  • 27mm 3/8-Inch Drive 1 1/16-Inch Oil Sender Unit Socket
  • 29mm 1/2-Inch Drive Vacuum Switch Socket
  • 27mm 1/2-inch Drive Injector Socket
  • 22mm 3/8-Inch 7/8-Inch Drive Oxygen Sensor Socket
  • 22mm 1/2-inch Drive Deep Offset O2 Sensor Socket
  • 22mm 3/8-Inch Drive 6-Pt Offset Oxygen Sensor Wrench
  • 22mm 1/2-Inch Drive 7/8-Inch Oxygen Sensor Socket
  • M12 x 1.25mm Oxygen Sensor Rethread Tool
  • M18 x 1.5mm Oxygen Sensor Rethread Tool

Sensor Socket Set

High Quality

Made from high performance chrome molybdenum and solid cast steel construction for strength and durability - Finished with Black Oxide to prevent rust.

Sensor Socket Set

Design

Special side cutout design allows easy access to oxygen sensors from any section and prevents damage to wires

7PCS Oxygen Sensor Socket

Easy Storage

All-in-one Tool Set in a heavy-duty blow-mold case with handle and latches for secure storage, simple organization and easy transportation.


Robert Brown
Reviewed in the United States on July 19, 2024
work good
shane
Reviewed in Canada on January 6, 2024
The different sizes/shapes make some of these hard to use on a compact design. The material in the contact surface stripped after one use each. The place I live is rough on vehicles in terms of rust (ocean nearby and salt on roads in winter). Might be easier to keep these around longer in an area less plagued with rust.
Customer
Reviewed in the United States on January 13, 2024
This tool worked just as it should to make the job a breeze. Extremely quality product. Highly recommended.
Marco
Reviewed in the United States on January 10, 2024
Im very please to say great product, great price, most importantly great customer service will buy for seller again recommend this product as well as the seller
Lance
Reviewed in Canada on August 24, 2023
Has always done as I expected
Leroy Harris
Reviewed in the United States on July 5, 2023
Great tools and good qualityWorked great even on the tuff one
BNSFguy
Reviewed in the United States on June 3, 2023
I was installing a new exhaust on my Lexus RC F and the O2 sensors have a "heat sink" or "shield" over the base of the sensor (see pic #1). I first purchased the standard O2 22mm socket which worked on the stock exhaust to remove the O2 sensors. There was just enough room between the sub frame and the O2 sensors for me to get the socket over the O2 sensors and remove them. However, after installing the new exhaust, having bolted up and tightened everything, the last thing I had to do was to reinstall the O2 sensors. Unfortunately, this aftermarket exhaust has a slightly larger OD and is straight vs the OEM pipe which had a slight 10 degree bend moving it away from the subframe. I could not get the socket over the O2 sensors with the limited subframe clearance. I then purchased a second O2 socket with a larger slot and modified it by cutting it down shorter hoping it would work. It did not. That left me with one final O2 removal tool to try, the "offset deep well" socket (see Pic #2). This one worked perfectly. It was just deep enough to clear the heat sink and reach the bottom so I could tighten them up.
Jakob Banks
Reviewed in the United States on June 25, 2023
I’m a technician and I use these at work quite a lot. I’ve used them with a 3 foot breaker bar, pounded on them with a hammer, put them on seized sensors glowing cherry red and they get the job done every time. For as much abuse as they take, they still look new and other guys sometimes borrow them because they hold a strong grip. For the money, these have been great!
lindini
Reviewed in Canada on June 24, 2023
Well made and does it's job.
Gholam Chris Kiani Amineh
Reviewed in Canada on May 27, 2023
Fair products!
Benoit Tremblay Technologie
Reviewed in Canada on May 25, 2023
Sur une Toyota Matrix 2009Pour commencer j'ai vaporisé du WD40 sur les filets du capteur d'oxygène et j'ai laissé agir toute une nuit.Le lendemain j'ai nettoyé la rouille sur les pans du capteur, BIEN ASSÉCHÉ avant d’utilieré la clé 3/8" x 1 1/8 ʺ avec une barre de force de 12" que j'ai allongée avec un tuyau de 16" de long pour accroître l'effet de levier. Au moment de forcer, je me suis assuré d'appliquer bien perpendiculairement la force au capteur d'oxygène qui s'est immédiatement déclenché et la clé est restée impeccable sans aucune trace de déformation.L’astuce consiste à simplement bien se préparerC'est un excellent outil que je recommande en autant de bien l'utiliser.
Thiago
Reviewed in the United States on December 6, 2023
Very good deal
Ali
Reviewed in the United States on October 5, 2022
I bought this O2 sensor kit in hopes of replacing both my upstream and downstream O2 sensors. It did the job for my upstream as there was plenty of room but it was useless on my downstream as the space was too tight. I had to buy a 22mm combo wrench and cut the wire off. My vehicles lack of space is not the products fault but this review is to give a heads up for anybody that has tight spaces.
Recommended Products

$26.95

$ 12 .99 $12.99

4.5
Select Option