Your cart is empty.
Your cart is empty. Specifications:
Brand new, top quality.
Color: white
Material: Nylon
Size: The diameter of rotated ball: 1/3", the top diameter of base: 4/7", the bottom diameter of base: 1/2". The detailed information please follow the picture.
With a load bearing capacity of 4.4 lbs each, and maximum: 6.6 lbs.
Function:
Mini Nylon Ball Transfer Unit are omni-directional load-bearing spherical balls mounted inside a restraining fixture. They are used for small and light transportation.
Easy installtion.
Package Include:
10 X Mini nylon ball transfer
GreenDeanMachine
Reviewed in the United States on February 18, 2023
Pencil in pic for size reference. These are EPIC for small projects. They aren’t super smooth bearings, but for lightweight items, it’s all you need. I got the vinyl plastic ones. Couldn’t really be happier!
GreenDeanMachine
Reviewed in the United States on February 18, 2023
Pencil in pic for size reference. These are EPIC for small projects. They aren’t super smooth bearings, but for lightweight items, it’s all you need. I got the vinyl plastic ones. Couldn’t really be happier!
Zorp
Reviewed in the United States on April 8, 2023
Bottom diameter is not 1/100 of an inch, maybe 1/10 of an inch, i think typo in drawings. These are good for my project because they are immune to magnets.
Zorp
Reviewed in the United States on April 8, 2023
Bottom diameter is not 1/100 of an inch, maybe 1/10 of an inch, i think typo in drawings. These are good for my project because they are immune to magnets.
Paul M.
Reviewed in the United States on September 26, 2020
Product (ball rollers) arrived and were well packaged and as advertised. They were better quality than what I expected
Paul M.
Reviewed in the United States on September 26, 2020
Product (ball rollers) arrived and were well packaged and as advertised. They were better quality than what I expected
DK
Reviewed in the United States on September 20, 2020
I used these to make my diy truck drawers slide more easily. They have been holding ip great for over a month.
DK
Reviewed in the United States on September 20, 2020
I used these to make my diy truck drawers slide more easily. They have been holding ip great for over a month.
Randy Beatty
Reviewed in the United States on February 13, 2020
About a month ago my coffee maker developed a leak from sliding it across the counter so the upper cupboards weren't in the way to make coffee. So I made a little trolley for the pot to sit on and used four of these transfer bearing on the underside.I drilled a one half inch hole for the bearings which is a little bit bigger than the bearings and I thought they would fall out when I flipped the board but so far they seem to want to stay put. If they give me a problem in the future I will hot glue them in place.Works great and coffee pot glides effortlessly out from under the upper cabinets.Definitely would buy again for similar projects.
Randy Beatty
Reviewed in the United States on February 13, 2020
About a month ago my coffee maker developed a leak from sliding it across the counter so the upper cupboards weren't in the way to make coffee. So I made a little trolley for the pot to sit on and used four of these transfer bearing on the underside.I drilled a one half inch hole for the bearings which is a little bit bigger than the bearings and I thought they would fall out when I flipped the board but so far they seem to want to stay put. If they give me a problem in the future I will hot glue them in place.Works great and coffee pot glides effortlessly out from under the upper cabinets.Definitely would buy again for similar projects.
J R.
Reviewed in the United States on January 25, 2020
no fault of the seller. but the ball does not extend as far as I really need. I purchased a similar product from another vendor several years ago that were perfect for my need, but unfortunately I did not retain the vendor. I purchased what I needed at the time with plenty of spares. I ultimately found other uses for them. I would have rated this product as a 4+ except for the design. I will just have to keep looking.
J R.
Reviewed in the United States on January 25, 2020
no fault of the seller. but the ball does not extend as far as I really need. I purchased a similar product from another vendor several years ago that were perfect for my need, but unfortunately I did not retain the vendor. I purchased what I needed at the time with plenty of spares. I ultimately found other uses for them. I would have rated this product as a 4+ except for the design. I will just have to keep looking.
ringding1017
Reviewed in the United States on December 11, 2019
I purchased an acrylic spice rack to sit on the counter (https://www.amazon.com/gp/product/B000KFSLMO/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) but when full of spice jars it was heavy and clumsy to move so I purchased these and inserted them as castors after drilling the appropriately sized holes in the bottom of the spice rack. Easy to roll around now.Cheers e
ringding1017
Reviewed in the United States on December 11, 2019
I purchased an acrylic spice rack to sit on the counter (https://www.amazon.com/gp/product/B000KFSLMO/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1) but when full of spice jars it was heavy and clumsy to move so I purchased these and inserted them as castors after drilling the appropriately sized holes in the bottom of the spice rack. Easy to roll around now.Cheers e
Jerome G
Reviewed in France on October 21, 2019
Bon produit conforme à la description
Jerome G
Reviewed in France on October 21, 2019
Bon produit conforme à la description
Jeremy
Reviewed in the United States on August 4, 2018
These worked fine for my lightweight purpose. I had to mount them ball down, and I did so with a bit of hot glue. they have a hole on the bottom which I covered with a bit of tape so that glue wouldn't get in. The dimensions were consistent between units and matched the diagram provided as one of the images in this item's description.
Jeremy
Reviewed in the United States on August 4, 2018
These worked fine for my lightweight purpose. I had to mount them ball down, and I did so with a bit of hot glue. they have a hole on the bottom which I covered with a bit of tape so that glue wouldn't get in. The dimensions were consistent between units and matched the diagram provided as one of the images in this item's description.
Recommended Products
