Your cart is empty.
Your cart is empty.
Specifications
Color: Black, Silver
Type: Single Cylinder, 4-stroke, Air-cooling
Material: Aluminum, Iron, #415 Steel, Rubber, Nylon
Surface Treatment: Baking Paint, Rust Prevention Shot Blasting
Assembly Required: Yes
Starter System: Hand Start
Number of Teeth: 44
Ignition Mode: Electronic Ignition
Max Torque: 4.5N-m
Bore Stroke: 56*40mm/2.2*1.57inch
Displacement: 100CC
Horsepower: 3.5HP
Rated Power: 2kw/h
Max Rotating Speed: 3600rpm
Max Speed: 50km/31miles/h
Compression Ratio: 7:1
Fuel Tank Capacity: 2L/0.52 Gallons
Fuel Consumption: 2.5L/0.66 Gallons/100KM
Lubricant Capacity: 0.4L/0.1 Gallons
Gasoline Type: 92#, 95#
Max Load Bearing Capacity: 200kg/440lbs
Noise: About 75 decibels
Gross Weight: 21.65kg/47.73lbs
Net Weight: 19.2kg/42.32lbs
Chain Cover Size: 41*7.5cm/16.14*2.95in
Fuel Tank Size: 30*14*15cm/11.81*5.51*5.9in
Gear Diameter: 18cm/7.08in
Diameter of Bicycle Teeth Disc: 18cm/7.08in
Engine Size: 36*28*23cm/14.17*11.02*9.05in
Package Size: 71*35*28.5cm/27.95*13.77*11.22in
Package Included
1*Bicycle Engine Kit
1*English Manual
All Accessories for Assembly
Notes
1. Please carefully read the manual and strictly follow the precautions to have a better experience.
2. Please note that professional installation is recommended.
3. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
David Gillette
Reviewed in the United States on February 9, 2025
Chain drive does not have all the parts that a belt drive does. Be sure to know what you are buying before you place the bid. But the engines are wonderful, I'm thinking about putting one on the front tire too
Leonardo G.
Reviewed in the United States on February 21, 2025
Got the chain option. It works great! Just be ready to improvise on the motor support . I had to make a slit in to the verticle tube support of the bike because the motor wouldn’t slide in place . The spark plug was like an inch or two from clearance at the top. I recommend centering the plate and running the chain to make sure it’s straight so that you won’t have to make too many repeat red-adjustments. The grooves for the screws on the mountains plate might not coincide with the screw holes on the bottom of the motor after seating the mountains plate to the correct adjustment. I was only able to secure the motor with the front two screws because of this reason. The motor still holds but at some near future moment I’ll have to take the motor off and drill two pilot holes through the mounting plate in order to hold the motor to the plate with the 4 screws. It’ll be much better secured this way. Make sure your brakes work good cause if you’re coming down a slope fast you ll need to have solid brakes in place. You’ll prob reach 38-40 mph . Other than that really good buy and fun bike project . Pretty fun!
John M Lisi
Reviewed in the United States on February 18, 2025
Everything was packaged beautifully and with great care. It came with everything as shown. There is no damage.
Recommended Products
