Your cart is empty.
Your cart is empty. 1000W 30000RPM Metal Flexible Shaft Rotary Tool Kit has good extensibility and is suitable for precision work, Comes with Abrasive stones, sanding paper discs-sleeves, mandrels, sandingchuck key, wrench to help you finish work easily.
Full Copper Motor
Powerful Pure Copper Motor: Excellent performance motor system improves the grinding efficience and ensure long service time,work stability run more smoothly.
External Carbon Brush Hole
You just need to open the hole then you can exchange the brush teeth easily.
Hanging Grinding Chuck
The handle and chuck are exquisite and durable, convenient to install, just clip the connector handle to the grinder.
Sturdy metal flexible shaft Wide Chuck Range:0.5-6.5mm Dia,three-jaw chuck Attachments are easy to replace and strong clamping force holds them firmly on the flex shaft drill under high pressure.
High Quality Rubber Shaft
Soft and easy storage. Long cable allows you to work your way around your work. Flex Shaft is consumablesn-replaced easily.
Super Heat Dissipation
With a heat vent cooling system, helps radiating. Low temperature low loss, it has excellent electrical conductivity, 100% copper-wound Motor can prevent the machine from overheating and burning to extend its service life.
Foot Switch Control
Adjustable Foot Pedal adopts stepless ABS plastic pedal, which is durable and not easy to heat up.
The large pedal design is easier to operate. There is a screw on the pedal to adjust the constant speed and rotation speed, which can realize stepless speed change, making the work faster and more convenient.
Widely Used
Multi-Purpose Rotary can be used for different materials, such as metal, wood, stone, jewelry etc. Ideal for precision and DIY craft enthusiasts work.
Professional rotary tool for finishing,polishing,cutting,drilling,sanding,adding textures, reaching small spaces and delicate areas.
Sawdust6
Reviewed in the United States on January 20, 2025
This is my second power carver, from the same company. For the price, they are pretty good. The top speed that's been around 16,000 rpms. The power covers aren't terribly fast. However, they do seem to have some good torque. If you are needing a much higher RPMs for engraving metal on guns, then you'll need to shop around for a different machine. Recommend for wood and soft stone.
Pat Orr
Reviewed in Canada on January 15, 2025
Useable. Need upgrades. Foot speed control cheap plastic, poor ergonomic design. Advertised as 500rpm to 30000. Enclosed documentation recommends not useable over 10000rpm.If properly designed and manufactured it would be a wonderful unit. Even if priced at $225.
Customer
Reviewed in Canada on September 8, 2024
pas utilisé bpcfacile d utilisation
Robert Williams
Reviewed in the United States on August 4, 2024
It’s decent, very good control of speed and has way more power than I’ll ever need. Very nice tool to have around. When buying a stand for the motor don’t go cheap, you need something fairly sturdy. The cheap stands are made for lightweight dremels not something like this. Other than that it’s a good tool for the cost.
@CurbyTheVan
Reviewed in the United States on August 21, 2024
I wanted this for jewelry but didn't want to spend the $ until I found that my van's distributor seized itself to the engine block and it broke in halfThe handle on this is smaller than a dremel so I could get it down to the but base of the distributor and I just ground away until I could get a pool for some penetrating fluid to sit in there. A weeks later my distributor came right out.Super fast, powerful, and easy to use in tight places.It's back to jewelry duty now and working great.
Wookieecantina
Reviewed in the United States on June 28, 2024
This is my first exclusive rotary shaft tool and to be honest, I regret not buying this years ago.The pedal is very smooth, albeit light weight plastic, so you may want to mount it on a small board to keep it in place.The kit comes with an extra cable which will no doubt be very helpful and the motor is quite heavy for it's size.The quality appears to be very good and there is certainly no shortage of power. I made a custom rack to hang it from and also keep the shaft out of the way and I couldn't be happier.I love having an actual drill style chuck as this will allow so many more tools to be utilized, not just Dremel style bits.I would recommend this product and have no doubt you've be very happy with your purchase, just as I am.I
Rumplestiltskin
Reviewed in the United States on June 26, 2024
Power is the reason I got this tool. I saw that it had a huge motor and I had burnt up2 dremels. You will forget about Dremel when you get this tool! I use it with a Variac so I will have unlimited speeds from 0 to 110 volts.
SilverFox
Reviewed in Canada on December 25, 2024
I like it a lot so far! Well made with quality and heavy duty hardware. My only problem is that there is no company name, no email address or phone number. Absolutely no mention of any kind of warranty to be found anywhere. Where do I get parts if I should ever need some. It's a little bit scary since they included an extra internal coiled cable at no charge and two extra motor brushes. You think they know something. Now to the manufacturer of this product... You should hire someone who can actually read and write English before you print instructions that are so full of mistakes and wrong words that I will keep the paper and read it out loud at the next party. It will make me look like a comedian!! It's ridiculous!
Steel Leroy
Reviewed in the United States on December 16, 2024
DON’T BUY THIS PRODUCT‼️I’ve Had this piece for less than 50’Days_it stopped working last night! “Changing the brushes on this crap flex drive didn’t help while the active brushes weren’t even worn out!”
DAVID M FISHER
Reviewed in the United States on January 6, 2023
I wanted to really love this device, but there are some issues. I quickly realized that the limited length of the flex shaft, really limits where you can hang it while working. I tried hanging it from ceiling rafter over workbench, but this limits how much reach you can get from the shaft. I ended up using a pipe clamp to clamp it to the workbench and a C clamp at the top to hang the motor from. Even with this the combination of the slippery hand grip and the rigid shaft couplings can make the motor swing around while using it.The geared chuck I actually prefer to the Dremel lock button/wrench combo, but because the handgrip is so slippery it takes a little while to get used to inserting the chuck key as the cylinder of the handgrip tends to rotate into the way of the opening for the key.The motor has plenty of power.Foot switch is annoying and has a cheap feel. Also the extension cord from the foot switch is not nearly long enough. With the motor hanging 3 feet off the bench, the cord barely reaches the foot switch. Why didn't they make this cord 3 feet longer? Despite this, I was able to get fairly good control of speed from the foot pedal.The including bits and accessories are disappointing. The cutting/routing bit is too small. The arbor for cutoff and cutting disks is useless and hard to use. The included sanding drums are super cheap and wore out after a minute of first use on wood. Wouldn't last more than seconds on metal. Stone bits are OK but I would have preferred one with a steeper angle.So the bottom line is that the motor and shaft are pretty sturdy, but the accessories are of poor quality.I ended up buying a separate kit with a wide selection of bits and this does the job.All of this being said, I would buy this again in preference to the Dremel+shaft equivalent because the motor is so much sturdier.
Scott and Elena Miller
Reviewed in the United States on November 23, 2022
Brand new, complete kit. Works great so far.Had a very minor problem with manufacturing, and 2 messages clarifying problem and solved! The problem wasn't caused by the seller, but the seller stepped and fixed it for me. Great service. Replied either overnight or within an hour or 2.
Recommended Products
