Your cart is empty.
Your cart is empty.Product Description
Note:
Not fit the Hakko 908 iron, 900s iron.
Fits ALL of X-Tronic Models, Except for 3010-XTS!
Specifications:
- Material: Copper
- Plating: Iron +Nickel+chromium (Finish)
- Colour: Silver
- Temperature Range: 200-480℃
- Hole outer diameter :6.5mm/0.26”
- Hole inner diameter : 4mm/0.16”
- Suitable for: 936, 937, 907,938, 969, 8586, 852D soldering station and many other soldering station.
Package list:
10pcs/set Soldering Tip
900M-T-IS
IS Type: The tip of the soldering iron tip is small and curved. Application range: Suitable for fine welding or small welding space, and can also correct the tin bridges generated when welding chips
900M-T-I
I Type: The tip of the soldering iron tip is small. Suitable for fine welding or small welding space, and can also correct the tin bridges generated when welding chips.
900M-T-B
B Type: round head , the whole front of the tips can be welded. Suitable for general welding, regardless of the size of the welding spot, also can use B type.
900M-T-2.4D
2.4D Type: Welding with batch nozzle. Suitable for welding requiring large amounts of tin, welding environment with large welding area, thick terminals and large solder joints.
900M-T-LB
LB type is a type of B type, slender shape. It can operate flexibly in relatively high-depth components or in a welding environment with narrow space.Scope of application: suitable for general soldering, regardless of the size of the solder joints, you can use the B-type soldering iron tip.
Rob
Reviewed in the United States on February 9, 2025
they are a bit shorter than the genuine, OEM "Weller" tips, they fit fine.In much use over the last couple of months (I repair tube amplifiers), I will say that they are better quality than the OEM Weller tip. The new OEM tip I put on awhile back failed after only a couple months of use. The tip became heavily corroded and the "tin" coating wore off, so solder would not adhere to the tip, would not take or transfer solder, and would not clean-up at all.After installing this tip in April, it is still going strong (it is now mid-June). I'm still on my first one from the pack! The tip cleans well, the "tin" coating is strong and has not worn off, and it accepts solder and transfers very well.Excellent value and works great!
Kenneth L. Sieber
Reviewed in the United States on February 12, 2025
They seem to be good tips. They fit the soldering iron that I purchased them for, but the iron that I purchased them for( https://www.amazon.com/dp/B09DY7CCW5?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 )did not produce enough heat to enable them to solder anything.
Jhonyprinterpro
Reviewed in the United States on September 7, 2024
The media could not be loaded.
هيما
Reviewed in Egypt on August 25, 2024
حاجه مش كويسه خالص لا تصلح للحام
Mike
Reviewed in the United States on December 7, 2024
These work well and are a good value!
RDY
Reviewed in the United States on December 4, 2024
Fit my soldering iorn and work as they should.
BROCIO
Reviewed in the United States on November 17, 2024
I tried using these on the soldering pads on my flight controller with 30 awg wire......could really get the pads heated up enough. They worked pretty weil on soldering two wires together but, that kind of limits their function in my opinion.I'm going to give it 4 stars and attribute it not working for me on my soldering iron and me not using it the correct use case.
K. Miao
Reviewed in the United States on November 16, 2024
I needed to replace some solder tips and this did the trick. The coating seems kind of thin, so let's see how long it lasts.
Alan M.
Reviewed in the United States on June 23, 2023
I purchased these tips for use in my Weller SP40NKUS iron. Although they are a bit shorter than the genuine, OEM "Weller" tips, they fit fine.In much use over the last couple of months (I repair tube amplifiers), I will say that they are better quality than the OEM Weller tip. The new OEM tip I put on awhile back failed after only a couple months of use. The tip became heavily corroded and the "tin" coating wore off, so solder would not adhere to the tip, would not take or transfer solder, and would not clean-up at all.After installing this tip in April, it is still going strong (it is now mid-June). I'm still on my first one from the pack! The tip cleans well, the "tin" coating is strong and has not worn off, and it accepts solder and transfers very well.Excellent value and works great!
Recommended Products