Shopping Cart

Your cart is empty.

Your cart is empty.

10 PCS (5Pack) 2091 Filters for Respirator, 2091 Particulate Filter Installed on Filter Retainer Replacement for 6000 6200 6800 7000 FF-4 Against Dust Sanding Woodworking Welding Painting, Pink

4.6 (8) Write Review
Free shipping on orders over $29.99

$15.99

$ 7 .99 $7.99

In Stock

1.Size:2091-5pack


About this item

  • Multilayer filtration :2091 filter cotton is composed of non-woven fabric, melt-blown cloth, hot air cotton,14 layers of filtration, layer by layer purification, recommended for the environment containing certain non-oil-based particles. Low breathing resistance, filter more than 99.97% air particles, bring you fresh air.
  • Wide compatibility: 2091 particulate filters are suitable for all kinds of facepieces, including half facepieces and full facepieces 6000/7000/6200/6800/FF-400 series, and must be used together with facepieces; suitable for the following industries: agriculture, construction, primary metals.
  • Efficient Protection: Particulate Filter 2091 with Level Organic Vapor Relief, 2091 Particulate Filter Cotton helps protect against a wide range of oil and non-oil based particulate contaminants. Helps provide respiratory protection against exposure to lead, asbestos, cadmium, arsenic and dust.
  • Replacement Time: 40 hours of protection is a reasonable expectation for each 2091 respirator filter. For a better experience, when you feel high breathing resistance, or when the filter is dirty or damaged, please replace the filter cotton immediately. This product does not produce oxygen. Do not use when the oxygen concentration is lower than 19.5%
  • Warm attention: Package Contents:1×10 pieces (5 packs) 2091 particulate filters.We always provide satisfactory after-sales service in the first time. If you have any questions, please contact us in time.


Product Description

2091 Particulate filter
2091 filter
2091 Particulate filter
面具图

尺寸
2091 P-100 Particulate Filter Specification
  • Material: cotton, plastic，Non-woven fabric
  • Size:The diameter of the filter is 4.33inches/109.98mm .Interface diameter: 34.8mm / 1.37 inches

2091 P100 Filter Cotton

How often should these be replaced？

  • 40 hours of protection is a reasonable expectation for every respirator filter.
  • When the filter cotton is dirty, damaged, and the breathing resistance increases significantly, please replace the filter cotton.
  • The product cannot produce oxygen, please do not use it when the oxygen concentration is lower than 19.5%.

INSTALLATION

2091 filter

Installation Step 1

Take out respirator mask and particulate filter.

2091 filter

Installation Step 2

Align the slots of the mask and particulate filter.

2091 filter

Installation Step 3

Rotate in the direction of the arrow.

2091 filter

Installation Step 4

Rotate to the position shown in the figure

场景图

Efficient filtration

1. This 2091 particulate filter consists of non-woven fabric, meltblown fabric and hot air cotton, 14 layers of filter cotton, which can effectively filter oil and non-oil based particulate contaminants.

2. The particulate filter filters all types of particulate matter, including: welding fumes, metal fumes, asbestos dust, radioactive particulate matter (such as uranium and plutonium), glass fibers, etc.

3. Use on multiple occasions

Painting

Welding

Metal Cutting

Sanding work

Renovation work

Decorating Carpentry

Suitable for production in cement factories, ceramics factories, shipyards, soldering, railway,metal smelting,interior renovation,stone processing,graffiti painting, wall art, powder processing.

Have a nice life!


Private
Reviewed in the United States on March 3, 2025
Awesome
Mark C
Reviewed in the United States on February 27, 2025
These filters fit my mask perfectly! It was nice being able to order a pack of 10 so I don't need to reorder for a while. They are of very good quality and worked great for my needs.
GK
Reviewed in the United States on February 11, 2025
Can def tell it’s fake but it was cheap
Customer
Reviewed in the United States on January 30, 2025
Having problems dealing with sawdust in my carpentry workspace I thought it was necessary to improve my respirator to the 3M headgear that uses these filters. Within seconds of putting the respirator on it was obvious that the masks I had been using were too porous. The filters are lightweight and snap cleanly into the respirator. I ultimately discovered that, while the filters are large, they are light weight. The only con of the filters are that although they aren't truly single use, they they also aren't washable.
Marian-s
Reviewed in the United States on January 17, 2025
I peel a lot of paint and old adhesive and I feel like I haven’t lost many brain cells. Must be doing the job. Fits well on my 3m mask.
Troy
Reviewed in the United States on December 26, 2024
This have worked really well. I have used them for cutting wood, tearing down rock walls, mowing the yard and doing lapidary work. It definitely filters out the dust from all of this. You can tell that it works because you see the fine dust collected on the outside of the filter. I would recommend these.
charles stevens
Reviewed in the United States on October 29, 2024
Over the past few years, I have been working with reclaimed wood. By not using the proper mass filters along while using a sawdust collector, I have gotten sick a few times throughout the years. I have come to the conclusion that the old wood had mold spores on it which I was inhaling, as a result, made me sick. I did my research for the proper filters for woodworking in my workshop and I haven't gotten sick since using these. I personally recommend these filters.
Bryce P.
Reviewed in the United States on April 13, 2024
I just use these for sawdust. They do a good job and are inexpensive so I can replace them regularly. Working in cold and damp conditions, I like to replace cartridges often. These are a good price so I didn't feel bad throwing the old ones out. Have bought these multiple times and didn't notice a difference between these and 3M.