Your cart is empty.
Your cart is empty.Product Description
USAGE AND NOTE:
The correct fuel pressure can help your vehicle drive as efficiently as possible.The detection of fuel pressure is an essential part of the fuel injection system for troubleshooting.
If the measured value is less than the specified value, and the intake system is normal, it can be explained that the cylinder and piston, cylinder head leakage, the possible original for the cylinder, piston, valve, piston ring wear, ablation and other bad conditions;
If the measured value is greater than the specified value, and the intake and exhaust system is normal, the possible cause of serious carbon deposits in the combustion chamber.
There is not schrae/der valve adaptor.
It does not apply to Bos/ch, Jee/p, Chev/ro/let，Fo/rd or G/M.
The color of the accessories might differ, yet it has no impact on their usage.
Convenient And Safe Design
0-140psi/0-10bar Dual Color Coded Scale
Pressure Release Valve Relieve Pressure in a Flash
ANTI-CORROSION & ANTI-RUST
Multiple Adapters for More Applications
Necessary Fuel Oil Injection Pressure Tester Tool
Tee Adapter
M12 x 1.5 Straight Adapter
M12x1.5 to M14 x 1.5 90°Adapter
To begin with, carefully remove the primary fuel pressure sensor installed on the engine lubricating oil circuit. Subsequently, install the fuel pressure tester in its place following the standard installation procedures to ensure proper connection and functionality.
Once the installation is complete, start the engine. It is crucial to operate the engine at the pre - specified speed. This speed has been determined to accurately represent the normal operating conditions for measuring the lubrication system's fuel pressure.
At this moment, the indication value displayed on the fuel pressure tester precisely represents the fuel pressure within the lubrication system. Make sure to record this value accurately for further analysis and diagnostic purposes.
kyle hunter
Reviewed in the United States on March 2, 2025
Operates as described
customer
Reviewed in the United States on February 28, 2025
The quality of this tool set isn't amazing, but for the price you are not going to hear me complain. It does what it's supposed to do and that's all I want from it. Very happy with it, was able to quickly diagnose a potential fueling issue with this kit. Should be able to use it on pretty much anything else in the future and for that reason it is invaluable.
Frost
Reviewed in the United States on February 27, 2025
General quality is mediocre but the cost is very very low. Things like the rubber housing not exactly fitting the gauge, things like that. I have a 2012 Mini Countryman that I got this for and unfortunately (and also of course), it does not have the proper fitting. The included fittings are all for much much older vehicles. My mini has a built in test port that is just a standard Schrader valve, like the size you would find on a tire, but I guess even that is not industry standard. Make sure it has what you need before ordering.In comparison to all testers its going to be a 2 star but in its own price category it's at least a 4. How oftern are you really going to use it?
Peterson W.
Reviewed in the United States on February 26, 2025
Complete kit, includes enough fittings to work on a bunch of different applications. The gauge is accurate and easy to read. The extra fittings are versatile, but look a tad on the lower end of the quality spectrum. The metal quality is a bit below par, but for the price this kit is hard to beat.
Eric Woomer
Reviewed in the United States on February 24, 2025
You get what you pay for made in China, tried to measure my fuel pressure but the pressure release on the side is not shutting off so it's letting pressure and fuel come out the clear tube even when not pushing the button which says not the best craftsmanship I guess you could say. Not the greatest thing to have pressurized fuel going everywhere unexpectedly.
J. Jantz
Reviewed in the United States on February 20, 2025
This is a great kit with all the various adapters and tools to enable you to make the proper connections. I like the case that it comes in, and it should be easy to find when I'm ready to utilize it for my repair needs. Their were a few items in the case that weren't holding well, so they don't stay in their alloted space as well as I'd like. But overall it isn't a big issue and the quality seems to be perfect for a DIYer like me. I'm not sure if professionals would want to use this on a common or frequent basis, but for my casual use it's perfect. Happy to recommend.
Leonard M.
Reviewed in the United States on February 17, 2025
jiouxip 0-140PSI Fuel Pressure Tester Kit The jiouxip fuel pressure tester kit helped me confirm a broken fuel pump in my 1990 Buick Century. This kit is built for the individual who works on a car or two. It is not professional grade, but it is quite suitable for the DIY mechanic. The cost of the kit is very low. The gauge is large, which makes reading the pressure very easy. There is a release valve attached to the gauge, so removal can be accomplished without getting fuel all over the place. The kit does not have a huge assortment of adapters, but it will suffice for the back yard mechanic, unless he or she works on a more demanding fuel system. Jiouxip has a larger selection of kits for those who need to work on different systems. For owners with a car without a built in valve at the rail, there are hoses, hose clamps, and an adapter T that can be used to tap into the line. The included manual assumes a minimum amount of knowledge, and might not be sufficient for total novices to perform this task. The internet, and u-tube, have numerous sources explaining the proper methods of doing a fuel test on any particular automobile. I would recommend the jiouxip fuel kit to a friend who likes to work on his or her own car. One use that saves a trip to the mechanic could pay for several of these.
Customer Review
Reviewed in the United States on February 16, 2025
I have a vw Tiguan that shows an error message of low oil pressure warning, everytime I drive. The warning comes especially when I turn on a cloverleaf and when the engine is warm, and the rpms are low.So I need to check the phaser valve and the assembly bridge where the phaser valve first to check if the tiny screen for engine oil is located. So, I digressed a little. I also want to check the oil pressure by removing the sensor underneath the oil filter, to see how much is the pressure at various rpms. The greatest thing with this kit is the variety and quantity of adaptors that it comes with that would allow the gauge hose to fit in the oil pressure sensor hole. The project is on a tangent as I continue to collect all the parts ready to perform the entire repair.Great value for the money compared to some others that only sell thre tools in the box vs in this package.
Recommended Products