Your cart is empty.
Your cart is empty. Feature:
1.pneumatic push lock fittings Easy to install, You Can Easily Insert or Pull out the quick connect air hose fittings Without Any Tools
2.The Clip of Connecting Air Pipe is Made of Strong Plastic Material, Which is Not Easy to Fall off After Connection Adopt Sealing Component.
3.You can easily change the tubing connector direction. Narrow space is also suitable with the push.
Specification:
1.Working Pressure:0-1.0MPa | 0-145psi
2.Applicable Tube: PU / PA / PE / PVC
3.Working Temperature:0-60℃ | 32-140℉
4.After Completing the Connection, Please Gently Pull the Tube with Your Hand to Make Sure That It is Completely Connected Without Falling Off.
5. Size: Suitable for 3/8 inch - 1/4 inch tube OD
Package includes:
10 pieces pipe pneumatic reducer
Notice
1. The unit of this pneumatic reducer is inch size. Please check whether the outer diameter of the pneumatic tube is based on metric size or inch size before purchasing.
2.The Cut Of The Air Line Hose Must Be Completely Clean And Cut Straight Without Chips Or Crumbs. The Profile Of The Air Tube Must Be Round.
3.No Elliptical Or Other Form. When Inserting The Tube Into The Push Lock Fitting Push The Tube In Until You Feel The Tube Get Stuck In The Inner Shoulder Of The Air Hose Fitting.
4.Requires Exerting Force On The Air Tube, It Will Pass Through The Rubber Ring Located On The Inside Of The Air Line Fitting For Complete Sealing.The product is a reducing pneumatic joint
5.during disassembly of tubing before disconnection of tubing, always check tubing internal pressure for zero.
The size is 3/8 inch * 1/4 inch, for your purchasing experience, please confirm your pneumatic tube size again
kelvin shoebrook
Reviewed in the United States on September 14, 2024
Works great
keith G
Reviewed in Canada on August 8, 2024
The 1/4" end was good for the 1/4" line but the 1/2" end does not accommodate a 1/2" PEX or 1/2" copper pipe.
Mason Weidner
Reviewed in the United States on August 13, 2024
The spring fitment on these feels so smooth and is much easier to use than other products I've used.No leaks and feels very solid.Would purchase these and other similar products again.
Daren
Reviewed in the United States on July 15, 2024
Bought these to make a quickswap system for feeding from different filament dryers when not using my AMS system. It works well for that purpose and grabs 2mm ID PTFE tubing easily. Disconnecting is also smooth and has never presented any issues. My one issue is that I wish it were a bit shorter. It often takes one or two tries to get filament to move from the first tube to the one on the other side which i suspect is due to the tubing following the natural curve it has following insertion.. Once filament is fed through though I've had no issues.
Priya
Reviewed in the United States on February 24, 2024
Used this to reduce the water filter inlet connection from original 5/16 OD to a 1/4 OD on a new water inlet valve for a Frigidaire fridge. Tight fit and no leaks. The only piece needed was a spare 1/4 tubing - to connect the male 5/16 OD water filter pipe to the female 1/4 OD inlet valve connection. So, make sure you have some spare tubing to connect to 2 female ends, after the reducer.
Customer
Reviewed in the United States on December 20, 2024
Great product, thank you.
Purchaser
Reviewed in the United States on October 8, 2024
I'm very satisfied with these connectors. Work the first time without any leaks. When I had to replace a line, I did have a minor glitch trying to reuse one. This was no problem for me. When you consider the cost-effective pricing of these connectors, for my $$$$ you get more than you pay for. I am satisfied and yes I will be ordering these again.
Customer
Reviewed in the United States on August 8, 2023
Used for Air Suspension repair on LR3. Used it to reduce a 1/4 line to a 3/16. Great price, looks and feels like a quality piece. First one I picked from the bag works well and is holding air without leaks. I’ve used similar items in the past for LR repair and they work well. No need to replace entire line, just cut worn piece and attach quick connect fitting.
SALVADOR ROMERO DELGADO
Reviewed in Mexico on February 10, 2023
Son de muy mala calidadNo los puedo usar no conectan apropiadamente
SDM2014
Reviewed in the United States on April 6, 2023
Absolutely perfect!!! My fridge ice/water line started leaking because 'handyman' used brass foiiings that eventually cut into the nylon tube. DOH.Plumber wanted $75 for house call(he is two miles away-???) and then another $180 to replace the line and fittings!!! Double-DOH with alittle outrage mixed in!!!I googled and watched some videos on youtube.Yep, I am a 65 yr old woman with arthritis, but I'm a plumbing rockstar now, AND becoming my own 'handywoman' to boot!!!
Recommended Products
