Your cart is empty.
Your cart is empty.4.2 out of 5 stars
- #81 in Computer Monitor Arms
Product Description
Triple Monitor Mount
WALl three monitor stand has a high-quality gas spring mechanism that is capable of smoothly tilting, swiveling, and rotating, work more comfortable with the ergonomically correct position to reduce neck and eye strain.
3 monitor desk mount
-
Tilt
This triple computer monitor mount allows monitors on each side to be tilted +90°/-90°. Center Monitor can be tilted +15°/-15°.
-
Adjustment:
Center Monitor +15° ~ -15° tilt, Side Monitor +90° ~ -90° tilt, +90° ~ -90° swivel, 360° rotate
16” height pole
Up and Down 0.8” monitor height adjustable
You can easily adjust the angle of the monitor in a more ergonomic posture, whether sitting or standing.
Triple Monitor Stand
Muiltiple Screen Combinations
Full Motion Adjustable Free Standing Triple Monitor Desk Mount
Tony
Reviewed in the United States on February 20, 2025
I love the mount, but its REAL tight with (3) 27 inch monitors. The screws were either too shallow or too deep for my monitors so I had to add washers (as spacers). It took some work to get them to line up right but if these monitors were half a millimeter wider, they wouldnt fit. Love the outcome tho!! Worth it in the end
Customer
Reviewed in the United States on February 19, 2025
Great product.I have three Samsung 27 inch monitors mounted with no problems. Very sturdy without drilling. All monitors are angled/adjusted to face me with no stability issues. Saves space, looks great and would highly recommend.
Tony
Reviewed in the United Kingdom on February 15, 2025
Good quality; feels solid, but still has problems with the screen holders on the bar. Not as good as I thought; it keeps sliding down even after fully tightening. But still worth it if you don't touch it so often.
BTJ
Reviewed in the United States on February 1, 2025
Great design, easy to install, and an affordable triple monitor stand. Although the product instructions stated it would hold three monitors up to 27 inches each, it works perfectly in my setup with one 32-inch monitor positioned horizontally in the center and two 27-inch monitors arranged vertically on either side. I placed two pairs of wooden blocks under the side monitors to level them perfectly.
Nicola Marizza
Reviewed in Italy on January 18, 2025
While it allows you to put 3x 27'' monitors in landscape mode in a straight line, you can't really curve them as it's shown in the pictures because the arms are not long enough.The support is also not heavy enough so the whole structure is super unstable.
franklin
Reviewed in the United States on June 20, 2024
I needed a 3 monitor stand for the home office, but have a glass topped desk with a long flat back, so drilling and clamp mounted models were out.I was skeptical about the stability of this with three 24" monitors, but it hasn't really been an issue.It was a bit wobbly while setting up at first, and I was worried it would just tip over (which it almost did, but I caught it in time.) Once I positioned the arms correctly and locked them in place, it was balanced and stable.Maybe get a friend to help with initial setup to hold it stable while you get everything aligned, otherwise assembly was ridiculously easy, and for the price you really can't beat it.
Dan D.
Reviewed in the United States on March 26, 2024
Instructions are pretty clear but it was not very clear when ordering that you need to drill through your desktop for this to be secure. I was able to get all 3 monitors mounted without drilling but I am nervous about overall stability. When adjusting the monitors you can feel it try to tip over. Also, while it does fit 3- 27" monitors you are extremely limited on the amount of adjustment towards your sitting position. It would probably fit better if one was vertical and I adjusted the middle over to one side but for what I use my monitors for I need them all horizontal. Somewhat frustrating and will see if I can get used to the poor angle on the outer two monitors, if not, I will return it. I do want to add, while cheap the cord management clips do work well and the arms are sturdy especially when drilled through the desk. Will update review after a few weeks.
Robobots
Reviewed in Canada on February 14, 2024
I had a two (one on top of the other) monitor stand and wanted three monitors - two 24in and one 32in on the bottom. The product image shows two on the bottom but I figured since the pieces attached to the same bar it would allow me to switch the mounts. And it does! I would even wager you can buy two units and have four monitors - the unit is very sturdy but of course you should try to screw it in. Very happy with the purchase
Roberto J.
Reviewed in Spain on October 27, 2024
A ver muy bien para poner 3 pantallas, pero lo malo que si quieres poner 3 pantallas de 27 pulgadas, no las puedes girar, hay que ponerlas rectas. Para pantallas mas pequeñas muy bien. Doy 5 estrellas, porque se puede poner encima de la mesa sin sujetar ni taladrar. Aunque tambien viene con un adaptador por si quieres sujetarlo a la mesa. Para pantallas de 27" no lo recomiendo, para pantallas mas pequeñas sin duda. El precio esta muy bien y tiene calidad.
Donny
Reviewed in Canada on January 13, 2023
TL;DR worth every penny. Can subtly modify to increase stability.This stand is awesome. I had a clamp only two monitor stand before and this is much better. The monitors stay in position and it has a fairly decent range of motion to set them up. Can't angle them like a cockpit, but I got a little bit of angle so they're all facing me in the centre: I use it for work, not gaming.It's a little tippy without drilling a hole in the desk and using the clamp, BUT I found that you can use the weight plate underneath the desk stand if you just use slightly longer M5 bolts. It worked like a charm and is not tippy without intention force.It may not have all the features of the fancier clamp stands, but for less than half the price of those other brands, I have zero regrets. It's awesome!
Nick
Reviewed in the United States on January 27, 2019
I have a glass top desk for my home office, so using a clamp mount is iffy at best. So I got this. I have 3 Dell U2415 displays which are about 12 lbs each without the stock stand, well below the 22 lbs max for this mount. I do have an issue with the left arm sagging a bit, to where the adjustable height cannot adjust enough to offset the sag. I can lower the center one to help accommodate, but then the right monitor is too high, since it cannot be adjusted lower. So--the adjustability could be better--but for the price it can't be beat.Another issue is the base is beveled, so only the edges of the metal base meet the desk. And on top of that, there are some foam pads on the very tips of the front "feet", and one in the back. I used some .125" or so rubber pads cut to size to spread the load across the entire mount base.The last issue is that I have my monitors angled around me, where the edges of the 24" side displays are about 6" forward of the tips of the base. This seems to unbalance the mount (hence why they recommend drilling and bolting the base to the desk), it leans a bit forward on it's foam pads, but I've tested it and it would have to be pushed more than 30" to actually tip over--so it's just that the pole is not set back enough in the base, for my usage anyway. You could also add a counter-weight to the back if you desired.Pros:* Excellent price* Side arms are solid and don't wobble much* Cable routing is nice with the included clips* Many mounting options* Does not wobble when adjusting my electronic height adjustable desk.Cons:* Center mount has a lot of play, even when tightened down* Can't angle monitors forward much without need to use clamp* Arms seem to sag a bit past adjustable range (12mm), hard to get all monitors exactly level
Recommended Products