Your cart is empty.
Your cart is empty.Product Description
Laboratory Support Stand Set
Crafted from stainless steel and cast iron, our support stand withstands high temperatures and corrosion for long-term use. Featuring multiple adjustable clamps and retort rings, it meets your diverse needs. It excels in filtration, heating, and titration experiments.
Our lab stand and clamp kit is suitable for research or teaching tasks, primarily used in physical chemistry experiments such as filtration, heating, and titration.
The retort rings can be freely adjusted in height according to experimental needs, ensuring test tubes or flasks are positioned optimally for distillation operations.
Designed for a secure grip, the clamps firmly hold test tubes or flasks, preventing any shaking or loosening of the experimental apparatus.
The cast iron material offers excellent stability, withstanding pressure and abrasion for prolonged use without deformation or damage, ensuring your experimental setup remains steady and secure.
Annette
Reviewed in Germany on June 27, 2024
Ich benötige den Laborständer zur Filtration von Flüssigkeiten und zum Einfüllen in kleinere Fläschchen. Für diese Zwecke ist er bestens geeignet.
paciulli
Reviewed in Italy on June 26, 2024
Il supporto è ben fatto, i supporti sono utilissimi perché di tre tipi diversi e in numero di 2 per ciascuno. La base è stabile pur non essendo pesante. Per il prezzo pagato, a mio parere, è un ottimo prodotto
Ross E. Nelson
Reviewed in the United States on February 12, 2024
The stand can be a little wobbly if you don't tighten everything up just right. Getting the clamps to the exact height and angle I needed took a little bit of fiddling. But then I'm not sure there is a way to have everything perfect on a stand like this.So for my purposes (I use it to hold the oil separator when distilling essential oils) it's pretty good. Good enough for four stars.
Günter Zimmer
Reviewed in Germany on November 22, 2024
solide Verarbeitung
Jason Bosh
Reviewed in the United States on October 9, 2024
This is sturdy and robust and ideal for distillation, reflux, or holding sep funnels. I will warn that you MUST make sure this stand rests level on perfectly flat surface. Also, make sure the weight of what you are supporting is balanced properly. If necessary, clamp stand to table if it wants to tip. Otherwise this stand will provide years of trouble free use!
Mihael
Reviewed in Germany on October 22, 2024
The stand was as I expected - excellent.
Calvin R.
Reviewed in the United States on October 13, 2024
Built well, low cost solution, and works as should. If you donnot overload it then there is no concerns about flask holders or clamps failing.
Master Unknown
Reviewed in the United States on January 1, 2024
I purchased the VEVOR Laboratory Grade Metalware Set for my lab, and it's been an absolute game-changer. The premium iron construction is both durable and reliable, perfect for daily use. The 60cm stand, along with the lab and flask clamps, offers great versatility for various experiments. Easy to set up and corrosion-resistant, this set is an invaluable addition to any lab. Highly recommend - 5 stars!
superexcavator
Reviewed in the United States on April 28, 2024
This stand is super nice, built well, holds equipment solidly in place and reasonably priced. Worked so well, I bought a 2nd one.
Alessandro Rap1
Reviewed in Italy on September 27, 2023
Plastiche scadenti, odore nauseabondo e cedono di consistenza quando scaldi il vetro che devono reggere. filettature spanate. Base di metallo poco adatta a reggere un pallone da laboratorio da litro pieno. Il prodotto non vale quanto costa.
Davey Norman
Reviewed in the United States on March 16, 2023
I’ve had problems in the past trying to purchase retort stands from Amazon. They usually arrive with missing items. To my surprise, this stand came with all three rings, all three clamps, and all three clamp holders. It could possibly be a bit more sturdy, but for the money, this is hard to beat. Definitely recommend.
Luna
Reviewed in the United States on June 6, 2022
Well the stand itself is junk. The base is thin stamped steel with a hole slightly larger than the rod, so instead of screwing into the base it is simply bolted. This does not make for a stiff and sturdy stand, the rod wobbles a lot and refuses to stay upright.The ring supports were coated with something that cannot tolerate high temperatures and will fill the lab with a nauseating odour of burnt plastic when heated. Two of the rings were noticibly bent out of alignment and would tilt significantly up or down and sideways, while the clamps on them were not aligned to allow the threaded bolt to center with the support rod, causing problems with securing them to the stand. I'm not sure about plastic knobs on something which will be subject to heat but since the coating cannot tolerate that I suppose the rings will be restricted to holding funnels and the like.The three prong clamp is alright, opening and closing quickly with little resistance and holding glassware quite securely. However, a hole was melted through the rubber coating of the center prong during a distillation, so this might be best used for low temperature work such as holding a condenser or a receiving flask.The burette clamps will not hold my 50ml Burette because the opening is too big when the prongs are closed all the way, but they can hold standard 16mm OD test tubes. I cannot speak for the heat resistance of the rubber pads as I have not tested them with heat. Aside from that they seem alright and should last a while with proper care.The right angle clamps are surprisingly good, clamping down real tight on both the extension clamps and the support stand. I don't know how long the plastic knobs will hold on since I cannot see how they are attached to the bolts, but so far it seems these clamps are probably one of the best features of the entire package.Overall it's a mixed bag at a price that easily competes with other brands when considering everything that's included. If anything, I would recommend tossing out the stand and not using heat with any of the clamps or rings.
Kindle Customer
Reviewed in the United States on April 9, 2022
I selected this chiefly for the cast-iron base. I wanted something good and heavy, like we used in school. The weight is perhaps a bit less than I'd like, but there's a second hole drilled in the middle of the stand, which I used bolt it to the workbench. Now it's rock-solid, and no way it's going to fall over.It came with three transverse connectors of quite good quality; three solidly made rings of assorted sizes; two flask clamps, which are just a bit wobbly due to the jaws being made of stamped metal, but nevertheless hold a flask securely and are quite serviceable; and a three-fingered burette clamp, again, a little wobbly, but perfectly serviceable. The clamps are solidly fastened to the steel arms with two thick metal pins, so there's no danger of them falling apart, and the connector that fastens it to the column is well-built. Despite the 'wobbly' impression of the clamps, the manufacturer has taken full care with the features that matter.You can't beat it for the price, and despite the mild shortcomings, I expect to be using it for years to come.
Recommended Products
$24.49
$ 11 .99 $11.99