Your cart is empty.
Your cart is empty.Product Description
It's not Yellow!
Remember to remove the Yellow Protective film before use. Do not remove it until the last step of the installation process. Be sure to scan the QR code, or watch the installation video on this product page. Once the protective film is removed, all will be clear.
Does it Fit?
You might be thinking, "This thing is too big, it doesn't fit." The Anti-fog insert should fit tightly against the inner pins so that it stays in place and creates a good seal. Be sure to bow out the shield as far as you can to assist in the installation process. Scan the QR Code on the packaging or watch the installation video on this detail page for the technique to ensure the proper fit.
See the difference!
When installed properly, the Anti-Fog Insert will be sealed to the inside of your helmet's shield, creating a trapped pocket of air that will not fog up. Because the Anti-Fog Insert is out of your line of sight when installed, you can leave. it in place for day or night use.
Kevin W.
Reviewed in the United States on January 7, 2025
The insert was too long to fit the visor on my Neotec 2 helmet. It would not lay flat against the visor.
Matt
Reviewed in the United States on January 20, 2025
It’s compatible with my helmet but which is a Nortec II but it’s a little loose causing my helmet to fog up a little on one side. But it does the job.
Mike L.
Reviewed in the United States on September 28, 2024
I already tossed it in the trash and ordered a new one from Shoei. The instructions say to not use this at night ... say what!. There is a serious optical issue with these. There is a distinct clouding type look when you drop down the shield. Night vision is reduced and glare is just down right dangerous.It did fit my tec II without issue. But the crappy optics made this a no go for me.
Kip C.
Reviewed in the United States on July 6, 2024
Easy to install. Best to watch a YouTube video first. Takes just a few minutes and works great
Val C.
Reviewed in Mexico on July 6, 2024
Mas económica pero no la misma calidad de Shoei
Jeremiah Taylor
Reviewed in the United States on May 12, 2024
I bought the combo face shield and anti fog to replace my original shoei setup. The combo works together just fine and the shield does fit my helmet, but as you can see from the pictures the new shield is just slightly wider and the new antifog might not fit the original shoei shield. Just my opinion but if its time to change out your anti fog you might as well change out the shield too.
川那辺 由美子
Reviewed in Japan on January 9, 2024
シンプルに本体のみで少し驚いたが、それ以外は、すぐにシールドに装着して快適に利用できたので、とても助かりました。
Gary
Reviewed in the United States on September 24, 2023
I didn’t want to pay double for the brand name Pinlock to replace my original Pinlock that came with the Neotec 2. I took a chance and this brand’s quality might actually better. It fit my face shield perfectly with good contact around the silicone gasket. I commute 46 miles everyday and have’t gotten any fogging. The part i was most impressed with was the clarity of the lens. I swear it may be even more clear and sharp than my original Pinlock Evo that came with my helmet. I’d recommend this. Just make sure you get the right one for you helmet fit.
Roque
Reviewed in the United States on November 25, 2023
By saying that it doesn't work because the plastic is thinner, when I installed it the silicone it has only holds it when it's hot you feel the plastic move like it doesn't work when it's hot I bought 2 because I like to have extra but in this one occasion it was a bad idea it doesn't work
Man9oor
Reviewed in the United Arab Emirates on January 13, 2023
ممتاز ومفيد جداً
YEN,WEI CHENG
Reviewed in Japan on January 7, 2022
我喜歡這個產品的防霧效果，效果非常的好，非常感謝提供如此有用的商品。
Me, Myself, and I
Reviewed in the United States on July 21, 2021
Ive used the Pinlock system on almost all my helmets for the past 10+ years. Once installed and adjusted, the system works flawlessly for me. I've ridden in torrential down pours with out the Pinlock system, and I'd constantly have to crack the face-shield to defog it.With the Pinlock system, face shield fogging is no longer an issue.A few Tips:1. The system works by creating a sealed double pained window where the insert attaches to the face-shield. Make sure that when installing the insert, you follow the installation instructions and ensure that the arrows (pointer) on the post are facing forward (as the shield sits closed on the helmet). If you encounter any fogging under the installed insert, rotate both Pinlock mounting posts a little at a time (same amount each side), until the fogging stops. Also, when making adjustments, ensure that the post pointers are oriented the same in regards to the helmet: 45 degree's up and forward, straight up, strait down, etc. This will keep each post's cam surfaces oriented the same amount and force the insert to move forward equally from both sides.2. The insert is hygroscopic (absorbs moisture), which helps it to absorb any moisture that develops between the shield and insert. It is therefore recommended to never clean the insert with water or allow it to get wet. Doing so will probably not ruin the insert, but it will shorten it's lifespan. Mine have occasionally gotten a little damp due to rain drops leaking past an unsealed face-shield, but they all have continued to work fine for quite some time.
Recommended Products