Your cart is empty.
Your cart is empty.Product Description
johvel
Reviewed in the United States on February 27, 2025
Been selling overseas refills and this is the best connector I've ever use. Just really really over slowly so that the valve does not block. Maybe a 1/2" opening. If it does lock, just release pressure and try again.
kim
Reviewed in the United States on February 11, 2025
I previously had purchased the longer adapter with a pressure gauge. It did not work as well as this. Probably because it is more direct. Able to fill quickly with without an issue.I have included a picture of the other adapter with gauge. Don’t buy this one. It only fills about 25%. Buy the shorter adapter, which is the one I’m writing the review for.
John
Reviewed in the United States on January 6, 2025
So this works well on the old blue style SodaStream CO2 canisters BUT when you open the CO2 valve to fill you have to crank it open 1 mm at a time VERY slowly until you hear the CO2 going into the bottle and then stop cuz it only refills if you go super super slowly and it takes a couple minutes for it to refill but you can hear it. If you open it even a little more it will stop due to the safety valve and then you'll have to start over by closing the tank valve and then releasing the adapter pressure and then tightening the adapter pressure knob and then once again open the CO2 canister super duper slowly like amazingly slow until you hear the flow.Also there is a brass filter in there that originally I thought was blocking the flow but it's just a filter. I poked it out with a screwdriver. You can pop it out or leave it in it's supposed to filter impurities from your CO2 sourceAlso I froze the canister overnight and I now have a full pound filling the CO2 canister. It's even more C02 than you get directly from SodaStreams canisters 🤠
christopher hayes
Reviewed in the United States on January 6, 2025
This is a good-quality, heavy-duty adapter. You will need one like this to refill your own Sodastream cartridges, which you absolutely should do because the refill prices on them through exchanges or buying new ones are murder. I use the adapter to connect to this - https://www.amazon.com/dp/B00IE1DJ2I - 5 pound tank, and it works easily and properly. The threads are good, and the piece itself is of a heavy weight. I expect this to last forever, basically.I should say that the spare o-rings that came with it, at least mine, are absolute junk (hard plastic) that don't fit at all. I guess someone stuck the wrong thing in the package. It's easy enough to find replacements if you should ever need them, though.
Private
Reviewed in the United States on January 27, 2025
So far I have refilled 5 CO2 cylinders 60L size. There were no leaks, everything worked as advertised. This valve creates a lot less/minimal CO2 waste. Definitelly recommand it.
Patrick
Reviewed in the United States on January 25, 2025
Used this to reifill our Soda Stream canisters we save a lot of money this way
Brian Culver
Reviewed in the United States on November 13, 2024
Not much to say. This adapter is now in a landfill. It did not work after multiple attempts. I tried the instructions and tried variations of instructions ... nothing. I could not get it to work. Some claim that it worked for them. In theory, it could work ... but it did not. I eventually tried another brand adapter and I had success.
Jamie Jackson
Reviewed in the United States on October 19, 2024
I refilled my Drinkmate cylinder within 5 minutes of this arriving on my doorstep.Mine did have the integrated filter, unlike another reviewer's.I'd already had an empty 5lb CO2 tank from my home brewing days. I traded it for a full tank at my local gas supplier (Roberts Oxygen) for $35 (the price of a new, little Drinkmate canister)! All of their CO2 is food grade.My process:1. Weigh my empty canister (706g). Check my canister's capacity (410g). Target weight: 1116g.2. Freeze canister. (Or skip for a less complete fill.)3. Attach adapter hand-tight to 5lb tank.4. Screw empty canister to adapter.5. Invert the whole assembly (since my big tank is a normal one--not a siphon tube tank made for refilling).6. Slowly release big tank's valve. [However, I've read that the slow ramp up is unnecessary for Drinkmate and older (blue) Soda Stream canisters, which this adapter fits.]7. Wait for the hissing sound of transfer to stop (it only took around 10 seconds).8. Close the valve on the big tank.9. Unscrew filled canister from assembly.I weighed the filled canister at 1168g, which is a little past a complete fill (~105%). That's a result of preparing a fully chilled canister.Next time, I may skip the measurement since I landed close to the target. I can make a few drinks right away to purge the small overage.
Recommended Products