The sanding a little bit on the difficult side to change but not bad. The unit is a nice shop fox tool and is extremely handy in a shop where you have to sand things especially if they’re on a curve but really anything

Bought for woodworking projects and I don't know why I didnt buy one before. Came on time and was cheaper than anywhere else. If you are looking for a sander like this look no further this is the sander to buy.

With 80 grit and a hardwood you can chew material quickly. Save me tons of time on several projects. Only comes with a few sanding cylinders. 1 of each. Make sure you order more. They don't last forever. I end up free handling material for angles. Which works for me. Needed to make an adapter for my vac.

Superó expectativas, más con la promoción de meses sin intereses! Pongan mas promociones!

Belle petit machine, je fait du bricolage est c est génial .J ai faire venir les sleeves de la marque powertec elle a ajuste parfaitement sur les manchon .

works great as addvertzied

Works as advertised plenty of power table is square to spindle price was right just havn't owned it long enough to be able to give it 5 stars.

I love this thing! I had a Rigid EB4424 oscillating belt/spindle sander (the one sold at HD for ~$200) and this is so much better as an oscillating spindle sander. That should go without saying thought since any tool tailored to only one specific task should perform better than a tool made to do many. Regardless this is a nice little machine.Pros:~ basically NO SETUP. Unpack it, attach a spindle with a sanding sleeve, plug it in, and start sanding.~ runs nice and smooth. It spins quite a bit faster than the Rigid which adds to its utility over the Rigid one.~ very well balanced. I don't know if you can adjust the spindle for balance because mine was nearly perfect out of the box so I didn't bother trying.~ I love that it comes with a 3" spindle over the 2" of the Rigid. You might not expect it, but that extra inch makes all the difference... ("That's what she said!" Anyone? Huh? Huh?)~ It is surprisingly light. I would normally say that is a con because it speaks to the small size of the motor, but I don't think a bench top unit like this NEEDS a huge 1hp motor. If you are bogging this spindle sander down, you are either applying too much pressure (trying to remove too much material too quickly) or you should buy a larger free standing unit. The light weight means it will be easy for me to tuck this into a cabinet and keep it out of the way until I really need it for the occasional project.~ The dust collection works surprisingly well in my test even with a tiny little shop vac. I did however find that the port did not fit my small shop vac hose because it is a 1-1/2" port. I used this small Stanley unit:The Stanley is a 1-1/4" hose so it doesn't fit snugly inside the dust port on the sander. My temporary solution was duct tape and once it was sealed, even that tiny vac pulled enough air that there was hardly ANY noticeable dust on the deck of the sander. I am sure once I figure out an adapter situation and use my standard dust collection or shopvac up it will perform even better.Con:~ somewhat small oscillation range. That is kind of standard for these bench top units and given they are essentially all the same overseas manufactured unit re-branded for each seller, its not surprising. I just means you will have to flip the sanding sleeve over occasionally to wear it evenly.~ one thing that slightly annoyed me is they made specific slots to store all the little throat plates, spindles, and even the wrench, but they didn't include any place to store the extra washers included for the smaller spindle sizes! I hoped they might fit over the little spindle spikes but alas, they do not. So now I am left with three small washers that I need to make sure to not lose if I want to use the smaller spindles.~ I would have preferred the more standard shopvac 2-1/4" port. Not because you necessarily need the power for effective dust collection, but just because its more common and I wouldn't have to now go find an adapter. I believe this is what I need?http://amzn.com/B008KXPL80I will update this review once I find out...Overall, this is a great little machine for the hobbyist woodworker! Maybe even the more casual professional if you don't find yourself sanding curves everyday. Its nice and small so you can tuck it away until you actually need it. I would absolutely rate it five stars if it weren't for the dust collection port size and the lack of storage for the easily lost washers! I would certainly buy it again despite those small gripes.UPDATE 1/17/2016:It took a while, but I finally got around to purchasing that adapter and wouldn't you know it doesn't fit. Shucks... I haven't found a replacement yet, but I haven't really looked. I removed the link to help reduce confusion. I also added a couple pictures of the first project I sanded with this sweet little dity! See those sick smooth curves on the legs...

as a tinkerer I needed some sort of sander to take care of perimeter sanding for my projects... It works fast and fairly precised...The oscillating feature keeps the disk clean and also helps sand things faster.... I plugged it into a foot switch which allows for more precise control... love it.

If you do not already have an oscillating spindle sander, this will quickly become one of your favorite tools. It chews through wood in a hurry when shaping something, but you have a surprising amount of control and can do relatively detailed work with it as well. If you already have one, then I would say this is a great value for the price. You "can" bog it down if you really lean into it, but don't do that. On a 1 3/4 inch poplar board (hard wood, much harder than pine which is what most 2x4's are made of), 1 foot long and 1 foot wide, you should be able to take 1/2 inch off of a side (with the grain) in about 5 minutes, no problem, without straining the machine. Any faster and you may start to bog the motor. The nice machined work surface means you will get nice 90 degree angles. Of course, you can hold your work piece at an angle if needed (just hang on tight).I have been using it for making guitar bodies, and I love it. Things that used to take me more than an hour can now be done in under 5 minutes. By switching spindles and/or grains you can go from a "rasp" for removing large amounts of wood to a "nail file" to get a nice smooth finish that may not even need any hand-sanding if you are careful.One thing to check as soon as you take it out of the box is to make sure the motor spins up and works smoothly. The first one I got had some issues with the motor (intermittent starting and stopping). It still gets 5 stars because Amazon shipped me another one immediately and sent out UPS to pick up the bad one, all within 2 days, making me completely whole and satisfied. The replacement works like a charm and has already seen many hours of use with no issues.At this price, this is a great bargain. Others have complained about the spindle travel being too short. I am not sure why they think that, but it works perfectly for me. If the "bottom" of the sleeve gets gummed up, you can flip it over, and use an abrasive cleaning stick to clean it when both ends are gummed (which I highly recommend, search for them on Amazon as well).