Your cart is empty.
Your cart is empty.4.3 out of 5 stars
Note: The color of the item may vary slightly due to photography and your own computer / Phone
Easy to install, The servo on the SCX24 & AX24 can be adjusted forward and backward to put the servo in the best position. Compatible with most aftermarket servo for SCX24
Fit for 1/24 SCX24 AX24
Specifications：
Item name: Servo Mount Bracket for SCX24 AX24
Color: Black
Material: high quality Brass
RampCrab SCX24 AX24 Parts Package Included:
Servo Mount x 1
Screws 1 Set
Note: Please check your specific model's manual for compatibility, or contact us.
Daniel Bourdeaux
Reviewed in the United States on March 8, 2025
Do not buy. I have bought and built many scx24, and this is by far the worst fitment servo mount ever. I could not get the top screws to go in with out filing the mount and axle. The mounts for the upper control arms are so far out the axle is almost at a 45° angle leaning forward. After all that trouble, making shorter upper link and filing it down I really like how I was able to move the servo back.
cptcrash613
Reviewed in Canada on March 7, 2025
L9ok and feel good yet to install tho will update in future good pricing too
Customer
Reviewed in the United States on June 6, 2024
Works well and adds weight in the front.
Edward
Reviewed in the United States on March 5, 2024
Works good. Comes with threadlocker and decal sheet. Worth 5 stars alone.But works as intended and honestly more with the variety of mounting options. Great product
pimp
Reviewed in the United States on March 27, 2024
Great servo mount. Also a plus to have some more weight on the front axle
Larry Munyon
Reviewed in the United States on March 13, 2024
I thought it said quantity was 2, a pair. And I only received one. I will purchase another one and that will be the last product I will purchase.
Travis pratt
Reviewed in the United States on February 18, 2024
This comes with no instructions, and what would have been really nice to know is the screws that hold the mount to the axle are not the same thread as the stock scx24 jlu screws in the rear of the mount, but for some reason the front half of the mount they are threaded for the stock screws. This made me try and use the stock screws which go through the first hole fine, but then just seem kinda tight in the rear so I tried working them in and ended up snapping a screw off… I can’t figure any way to get such a small screw out so now I only have one screw holding the mount on, but more importantly only one screw holding in the top half of the axle cover that holds the bearing to the worm gear in. May work, but eventually I think I’ll have to buy a whole new axle and another mount because the mount is now stuck on the axle. I can’t entirely fault them as it’s my fault for using too much force and I should have stopped when it wasn’t threading properly and figured out the stock screws don’t fit, but simple instructions or a warning to use the included screws to attach the mount to the axle would have prevented this entirely.The included picture is the snapped screw, hard to see but it’s the top most screw on the axle cover. Really frustrated now, no instructions and the nonsense of threading the front of the mount for stock then having the back not the same thread and require included screws that just look like spares deserves two stars off. If you’re going to do stuff like that, include instructions or some type of warning to use the included screws.Besides that, it’s not a bad mount, after figuring it all out and a little trial and error seeing which way to space the posts ect. it fits fine. Just again, simple instructions would go a long way, they don’t even need to print anything, just put the instructions in this listing for crying out loud, costs nothing.They also included a nice little bottle of thread locker and some stickers, so that was a nice touch, but INSTRUCTIONS would have been more useful than those.TLDR; Use the included screws or risk snapping screws off in your axle which you can’t get out and may require buying a new axle.
Kare
Reviewed in Canada on February 17, 2024
fits perfect on my ax24.installed email servo with it,and the brass makes even nicer.
Meaghan
Reviewed in Canada on November 7, 2024
Well built little bit of metal. Options for servo mounting and a bit of counterweight down low. Comes with stickers!
RG
Reviewed in Canada on November 3, 2024
These servo mounts are great I now have ordered two sets. Very adjustable made of brass they add weight down low. I just received one of the new style ram servo mounts it is ok, but the old style was way better. The new one is nothing special.
Noah
Reviewed in the United States on April 4, 2024
Works better than stock for sure. Also super quick shipping. Ty
Cecil Beaman
Reviewed in Canada on April 15, 2024
Mount is good but comes with cheap hardware
Momof2monkeys
Reviewed in the United States on August 24, 2023
These mounts are great. Gave me a ton of options. I dremeled a little bit of my axle to move the mount forward in the axle/servo mount slots. Then I cut the front edge of servo mounts off. Beings that you have the option of raising them up to clearance the front upper link mounts. Instead of mounting in front of them. Doing this rotated my axle in a more favorable degree to aid with steering, and also raised the drag link/tie rod up for more clearance. Overall I highly recommend these mounts.
Recommended Products
$12.99
$ 6 .99 $6.99