Your cart is empty.
Your cart is empty.4.3 out of 5 stars
- #14,779 in Musical Instruments (See Top 100 in Musical Instruments)
- #9 in Bass Guitar Tuning Keys
Product Description
Cliente
Reviewed in Spain on February 28, 2025
Para lo que piden pues va de maravilla! Producto recomendado
Cliente
Reviewed in Spain on February 28, 2025
Para lo que piden pues va de maravilla! Producto recomendado
Norma Gomez
Reviewed in the United States on March 6, 2024
Like many after market parts, you may need to plug old mounting holes and drill new ones. Very easy do do. These fit my Squire PJ bass just fine.
Norma Gomez
Reviewed in the United States on March 6, 2024
Like many after market parts, you may need to plug old mounting holes and drill new ones. Very easy do do. These fit my Squire PJ bass just fine.
Skrammlis
Reviewed in Sweden on March 3, 2024
Helt ok än så länge
Skrammlis
Reviewed in Sweden on March 3, 2024
Helt ok än så länge
Christopher S
Reviewed in the United Kingdom on February 25, 2024
Usual quick delivery, Musiclily make decent quality fairly priced gear. These are great for the money, do the job and look good. So far they seem to be holding tune no problem. Got these for a Harley Benton MB4 project and they fitted perfectly. Would recommend.
Christopher S
Reviewed in the United Kingdom on February 25, 2024
Usual quick delivery, Musiclily make decent quality fairly priced gear. These are great for the money, do the job and look good. So far they seem to be holding tune no problem. Got these for a Harley Benton MB4 project and they fitted perfectly. Would recommend.
z@buton
Reviewed in Japan on October 20, 2024
息子のベースの為に購入、交換してみました。わたくし楽器に関しては知識ゼロですが、ネジや工具を扱うのは好きな方なので、ネットで検索しまくってやってみました。おそらくこの商品を購入される方は知識のある方か、知識のある方に交換を依頼される方がほとんどだと思うので、ここでは交換方法は記載しませんが、交換作業中に弦の巻き方や、ブリッジ、サドルの役目を知ったぐらいのド素人でも交換できました。ちなみに画像に写っているつまようじは、使用しないネジ穴を埋めているところです。既設のギアが割れてまともに調弦できないでいたので、交換して使える様になり、息子も喜んでくれました。
z@buton
Reviewed in Japan on October 20, 2024
息子のベースの為に購入、交換してみました。わたくし楽器に関しては知識ゼロですが、ネジや工具を扱うのは好きな方なので、ネットで検索しまくってやってみました。おそらくこの商品を購入される方は知識のある方か、知識のある方に交換を依頼される方がほとんどだと思うので、ここでは交換方法は記載しませんが、交換作業中に弦の巻き方や、ブリッジ、サドルの役目を知ったぐらいのド素人でも交換できました。ちなみに画像に写っているつまようじは、使用しないネジ穴を埋めているところです。既設のギアが割れてまともに調弦できないでいたので、交換して使える様になり、息子も喜んでくれました。
Gumby Ramone
Reviewed in the United States on July 19, 2023
Perfectly fit my Glarry P. Bass! I’m very happy to get rid of the really bad tuners the bass came with. These look almost exactly the same except they work better and feel a lot sturdier.
Gumby Ramone
Reviewed in the United States on July 19, 2023
Perfectly fit my Glarry P. Bass! I’m very happy to get rid of the really bad tuners the bass came with. These look almost exactly the same except they work better and feel a lot sturdier.
Björn Fuhlendorf
Reviewed in Germany on December 20, 2023
Für den Preis absolut okay
Björn Fuhlendorf
Reviewed in Germany on December 20, 2023
Für den Preis absolut okay
3d
Reviewed in the United States on November 15, 2022
Bushings are about 18mm. This is the MOST important measurement about the tuners, and its nowhere to be found in the description.It came with just enough screws (16), but one screw was a different size. had to use another screw from my spare parts.Overall, they're a little stiff, but work fine.
3d
Reviewed in the United States on November 15, 2022
Bushings are about 18mm. This is the MOST important measurement about the tuners, and its nowhere to be found in the description.It came with just enough screws (16), but one screw was a different size. had to use another screw from my spare parts.Overall, they're a little stiff, but work fine.
Julie Hustead
Reviewed in the United States on August 27, 2021
I had to fill the mounting holes with a tiny dowel and super glue. The center piece or bushing was slightly smaller than the the MIM tuner holes and I used 4 “small” drops of super glue to hold and center the bushing in place. Then I carefully marked and drilled new holes. I also didn’t trust the mounting screws and bought new mounting screws from ace hardware.Otherwise, the quality of the tuners were about the same as the tuners that came from the factory MIM jazz bass. It’s NOT an upgrade in any way. This is a way to get black tuners or replace broken or worn out tuners.DO NOT put these on an American fender…Ever! I wouldn’t put these on a new neck either. They work good, they hold their tune, they are a little rough, the paint scratches easy. I used the same tuners with 2R and 2L with a built from scratch and they work great.You are buying these because they are affordable not because they are an upgrade. You want nice tuners… save up your money.
Julie Hustead
Reviewed in the United States on August 27, 2021
I had to fill the mounting holes with a tiny dowel and super glue. The center piece or bushing was slightly smaller than the the MIM tuner holes and I used 4 “small” drops of super glue to hold and center the bushing in place. Then I carefully marked and drilled new holes. I also didn’t trust the mounting screws and bought new mounting screws from ace hardware.Otherwise, the quality of the tuners were about the same as the tuners that came from the factory MIM jazz bass. It’s NOT an upgrade in any way. This is a way to get black tuners or replace broken or worn out tuners.DO NOT put these on an American fender…Ever! I wouldn’t put these on a new neck either. They work good, they hold their tune, they are a little rough, the paint scratches easy. I used the same tuners with 2R and 2L with a built from scratch and they work great.You are buying these because they are affordable not because they are an upgrade. You want nice tuners… save up your money.
Luke Alamo
Reviewed in the United States on July 24, 2021
Tuners for my Glarry bass work great. The chrome plating was OK, not perfect.
Luke Alamo
Reviewed in the United States on July 24, 2021
Tuners for my Glarry bass work great. The chrome plating was OK, not perfect.
JStine
Reviewed in the United States on March 2, 2020
These are very good quality tuners. These were used on a Squier bass. The screw holes did not line up so I had to fill the old holes and make new ones but the tuners rock!
JStine
Reviewed in the United States on March 2, 2020
These are very good quality tuners. These were used on a Squier bass. The screw holes did not line up so I had to fill the old holes and make new ones but the tuners rock!
dirk blevins
Reviewed in the United States on December 26, 2020
I tried to find machine heads to fit a Peavey Fury IV - 1980 model. It was impossible on a budget. I took a chance on these after looking at the mechanical drawings. The top two holes aligned well. The bottom two holes didn’t and I had to drill some new holes. The old holes were exposed slightly and I could have filled them but I haven’t yet. However they work fine and were affordable which is what I was targeting. The old ferrules worked perfectly as well. Anyway hope this helps.
dirk blevins
Reviewed in the United States on December 26, 2020
I tried to find machine heads to fit a Peavey Fury IV - 1980 model. It was impossible on a budget. I took a chance on these after looking at the mechanical drawings. The top two holes aligned well. The bottom two holes didn’t and I had to drill some new holes. The old holes were exposed slightly and I could have filled them but I haven’t yet. However they work fine and were affordable which is what I was targeting. The old ferrules worked perfectly as well. Anyway hope this helps.
Dave G.
Reviewed in the United States on October 16, 2018
The image shows machine heads identical to my Music Man. these are fairly different. larger in size and the base is also different with wider set screws holes. You will have to re-drill holes into your instrument to use these. They get the job done in a pinch, but I will be replacing the one I used asap with a higher quality. I was expecting the lower quality, but not for them to be this different. THE IMAGE IS A STOCK PHOTO FROM HIGHER QUALITY PARTS, BE ADVISED.
Dave G.
Reviewed in the United States on October 16, 2018
The image shows machine heads identical to my Music Man. these are fairly different. larger in size and the base is also different with wider set screws holes. You will have to re-drill holes into your instrument to use these. They get the job done in a pinch, but I will be replacing the one I used asap with a higher quality. I was expecting the lower quality, but not for them to be this different. THE IMAGE IS A STOCK PHOTO FROM HIGHER QUALITY PARTS, BE ADVISED.
Recommended Products
$94.99
$ 40 .99 $40.99
$57.35
$ 25 .99 $25.99