Your cart is empty.
Your cart is empty.
What is in this rail section pack:
2x 2.2 inch/3 slot Picatinny Rail
2x 3 inch/5 slot Picatinny Rail
The package includes all necessary screws and locking nuts, as well as a hex wrench. No additional tooling is required for installation.
Joe M. Holcomb
Reviewed in the United States on March 2, 2025
Works just as described. It's what I needed. Quality is more than acceptable.
Joe M. Holcomb
Reviewed in the United States on March 2, 2025
Works just as described. It's what I needed. Quality is more than acceptable.
Chicken Strip Bandit
Reviewed in the United States on September 28, 2024
The longer ones fit cz scorpion 3+ micro almost perfect. I would probably buy them again but would find better hardware if I remove them I’m sure the screws will strip but the rails are solid.
Chicken Strip Bandit
Reviewed in the United States on September 28, 2024
The longer ones fit cz scorpion 3+ micro almost perfect. I would probably buy them again but would find better hardware if I remove them I’m sure the screws will strip but the rails are solid.
Howard K.
Reviewed in the United States on May 7, 2024
Liked the versatility of mounting on barrel guard.
Howard K.
Reviewed in the United States on May 7, 2024
Liked the versatility of mounting on barrel guard.
Quachita Mountaineer
Reviewed in the United States on November 14, 2024
Milled to specs
Quachita Mountaineer
Reviewed in the United States on November 14, 2024
Milled to specs
Corey S
Reviewed in the United States on October 30, 2024
Quality appears to meet my expectations, and further expect them to work well.
Corey S
Reviewed in the United States on October 30, 2024
Quality appears to meet my expectations, and further expect them to work well.
Michael Hill
Reviewed in the United States on June 17, 2022
I bought this due to the low price and nice assortment of rails. Unfortunately when attempting to tighten the rails to a typical torque value for metal-on-metal M-Lok (35 in-lbs) the head on the screw became damaged because it is made of soft garbage metal. This meant I could no longer tighten or loosen the screws. I ended up having to drill the screw heads off and in the process the drill bit broke and gouged the chassis on my brand new rifle. Luckily it's in a replaceable plastic portion of the forend and it isn't noticeable so it's not a big deal. I used a couple other screws which came with this kit to tighten my rail on using the included allen key and some blue Loctite to make sure it doesn't come loose.The bottom line: You get a lot of rails for the money but if you try to tighten to typical torque specs for M-Lok accessories you will end up damaging the screw heads. As things sit, I'm going to have to keep an eye on the rail to make sure it doesn't come loose.
Michael Hill
Reviewed in the United States on June 17, 2022
I bought this due to the low price and nice assortment of rails. Unfortunately when attempting to tighten the rails to a typical torque value for metal-on-metal M-Lok (35 in-lbs) the head on the screw became damaged because it is made of soft garbage metal. This meant I could no longer tighten or loosen the screws. I ended up having to drill the screw heads off and in the process the drill bit broke and gouged the chassis on my brand new rifle. Luckily it's in a replaceable plastic portion of the forend and it isn't noticeable so it's not a big deal. I used a couple other screws which came with this kit to tighten my rail on using the included allen key and some blue Loctite to make sure it doesn't come loose.The bottom line: You get a lot of rails for the money but if you try to tighten to typical torque specs for M-Lok accessories you will end up damaging the screw heads. As things sit, I'm going to have to keep an eye on the rail to make sure it doesn't come loose.
MH.
Reviewed in the United States on November 11, 2021
These seem well made and mount easily as with most mlok compatible accessories. I bought these because $15 + dollars for ONE 2" rail section seems like a ripoff, and I wanted aluminum rather than polymer. I also picked these because if there was some problem I could at least contact the US distributor even if they are manufactured in China.I have a few complaints. First the hex head mounting screws could be larger making them less likely to strip. Second the edges are a little sharp at the ends and aren't tapered down like many other rail sections. If not tapered then the slots should be continuous throughout the length with a half section at each end so these could be placed together to make a longer segment. Pretty good for some applications, but design seems budget.
MH.
Reviewed in the United States on November 11, 2021
These seem well made and mount easily as with most mlok compatible accessories. I bought these because $15 + dollars for ONE 2" rail section seems like a ripoff, and I wanted aluminum rather than polymer. I also picked these because if there was some problem I could at least contact the US distributor even if they are manufactured in China.I have a few complaints. First the hex head mounting screws could be larger making them less likely to strip. Second the edges are a little sharp at the ends and aren't tapered down like many other rail sections. If not tapered then the slots should be continuous throughout the length with a half section at each end so these could be placed together to make a longer segment. Pretty good for some applications, but design seems budget.
Jason
Reviewed in the United States on November 24, 2020
These are the best finish for price rails i have found after trying many different brands. The are very low profile and are as close to flush as you can get and still be able to mount something to. All the edges are rounded no sharp point to snag or catch on anything or cit yourself no ladder covers necessary.
Jason
Reviewed in the United States on November 24, 2020
These are the best finish for price rails i have found after trying many different brands. The are very low profile and are as close to flush as you can get and still be able to mount something to. All the edges are rounded no sharp point to snag or catch on anything or cit yourself no ladder covers necessary.
Recommended Products
$17.99
$ 7 .99 $7.99