Your cart is empty.
Your cart is empty.Product Description
The Diva LED+ dimmer switch provides optimal dimming performance of LED bulbs. This dimmer switch works with up to 150-Watt of dimmable LED/CFL or 600-Watt of incandescent/halogen, allowing you to control multiple bulb types on the same circuit. It is designed to control a broad range of dimmable LED and CFL bulbs from a variety of brands including Philips, Cree, GE, EcoSmart and Lighting Science. The Diva dimmer switch features a paddle switch to turn your lights off or on returning the lights to your favorite level. This dimmer switch also features a discreet slide control next to the switch, allowing you to adjust the lights for any activity. Coordinating Claro wall plate sold separately.
From the Manufacturer
Control the next generation of lighting with Lutron's dimmable C.L dimmers! Screw-in dimmable compact fluorescent lamps (CFLs) and screw-in dimmable light emitting diode lamps (LEDs) are a great energy-saving alternative to incandescent or halogen light sources; however, dimming them may be difficult. Lutron's new dimmers with HED Technology provides a solution to alleviate your dimmable CFL and LED dimming challenges, while setting the right light level to improve mood and ambiance. The Diva dimmable CFL/LED dimmer with HED Technology features advanced dimming circuitry that is designed for compatibility with most high efficacy light bulbs. With the same features as Lutron's Diva dimmer, the large paddle switch turns the light on/off and returns to your favorite setting. The discreet slider adjusts the light level to suit any activity. These dimmers improve the dimming performance of dimmable CFLs and LEDs compared to standard dimmers. Lutron dimmers with HED Technology also provide full-range dimming for halogen and incandescent bulbs, ensuring today's dimmer is compatible with tomorrow's light sources. The dimmer can even dim a mixed load of light sources (i.e. LED and halogen or CFL and LED bulbs on the same circuit).
KRITTER
Reviewed in the United States on February 23, 2025
These switches are deeper than standard rocker switches which takes up valuable space in the existing box, making pushing wires back into the receptacle challenging. It was very hard to get these switches back in the electrical housing box due to their deeper offset, and I was unable to change all three of my original rockers in my 3-1 box. I could only install 2. Overall, the quality is good and they are easy to connect to existing power, but they do take up more space than original switches.
Philip C George
Reviewed in the United States on June 5, 2024
Hopefully I just received a lemon. But attempted to install in 3 different locations. Simply would not work.
J-Bones!
Reviewed in the United States on March 20, 2024
I bought these switches with the Lutron gang wallplates. They look really good in remodeled bathroom. I would suggest the satin snow color for a modern bathroom. And they work great.
L. J. Cramm
Reviewed in the United States on July 4, 2023
I had a dimmer switch for my ceiling mounted LED light and it would flicker in low settings. This switch if you adjusted correctly you will not Flecker at low settings
Javier García Infante
Reviewed in Mexico on October 22, 2023
Tiene un diseño bonito, cómodo y trabaja excelente con mi lámpara led atenuable
AE
Reviewed in Mexico on September 14, 2020
Funciona, y son estéticos, pero el LED parpadea cuando baja del 30% de su potencia (valor estimado).
Frank Gibson
Reviewed in the United States on December 3, 2019
Does not properly dim LED bulbs. Poor circuitry leads to poor dimming and flicker. Tested with numerous LED bulb brands.
M.
Reviewed in Canada on June 27, 2018
Everything was good as expected from this seller!
Customer
Reviewed in the United States on January 29, 2017
shipped quickly, no problems
Canadian broker
Reviewed in Canada on July 9, 2016
woork well however has phillips instead of robertson screws which we Canadians love
Garrett
Reviewed in the United States on February 29, 2016
I initially bought a cheap $13 GE dimmer at Walmart that said it worked with LED bulbs, but the lights would not always turn on with the switch unless the dimmer was set to full brightness. It also caused a significant hum/buzz from the bulbs when dimmed below 50% or so. I am using 4 of the the 60-watt equivalent "Great Value" brand dimmable daylight LED bulbs from WalMart, which appear to be made by TCP.This dimmer is much better, but not perfect.It does reliably turn the lights on every time, even when set to the lowest dimming level. It has an adjustment for how low the lowest setting goes, which you set to match your bulbs and it works very well. This dimmer is able to dim my bulbs to a very low level while still reliably switching them on, much lower than the previous dimmer I tried. My bulbs ended up being happy right in the middle of the adjustment range provided for the minimum dimming level.At low brightness, my bulbs still hum/buzz a little, but not nearly as much as before. It's not enough to bother me, you can only notice it when the room is really really quiet.The way the switch snaps into position between off and on doesn't scream high quality - it has a very pronounced click and that part of it just feels kind of cheap to me.If I were to buy another dimmer switch today, I might try a different model in my search of perfection. But this one is good enough that I'm not going to return it. I spent hours reading reviews before deciding to give this one a try, and I never found one model that everyone agreed was flawless. I think a lot of it comes down to the bulbs you are using it with and your preferences.
DJC
Reviewed in the United States on August 29, 2015
As expected, Lutron is a great product. Finally a dimmer that serves many bulb options from incandescent to florescent to LED and at a great price! Satin White is a special order and this served my purpose perfectly.
Recommended Products
