Your cart is empty.
Your cart is empty.Inline Tube Inside & Outside Brake Tubing Deburring Tool for 1/8"-1/2" Diameter Tubing. This tool is designed to debur the inside of tubing from 1/8" to 1/2" diameter. This is a professional grade tool and is easy to use.
John S.
Reviewed in the United States on April 8, 2024
Great kit for replacing tie rods for my 2008 Ford Focus. The boots, however, lacked the holes for the vent tube that connects the left and right tie rods. I reused the d boots. Also, the included metal bands for securing the inner ends of the boots are a pain to use so I used zip ties instead. For the price you get both inner and outer tie rod ends for both sides. Les Schwab quoted me as much for one inner tie rod end only. Labor extra.
Nathan Songer
Reviewed in the United States on October 11, 2022
Does what it is supposed to and cheaper than some of the others that appears identical.
Joshua D. Rimmer
Reviewed in the United States on September 22, 2021
I could wish it was cheaper, but it really does a great job deburring small stainless, copper, and aluminum tubes. I had a job where I needed to deburr 160 short pieces of aluminum tube, so I broke down and paid the price for this. I wish I had done it years ago, it saved me literally hours on this one job. I have since used it on copper tube and pipe, stainless hydraulic tubing, and seamless steel tube, all making an easy, clean end on my material.
Vlad O. Dumitrascu
Reviewed in the United States on October 26, 2021
This tool is well made and all. But completely optional. It's just a deburing tool. Just a hardened scraper, really. I was doing CuNiFer tubing for a brake line. That is so soft, you could use sand paper or a file. Heck, a drill counter set head would do the same thing for cheaper.The motion is a bit weird, too. You offer the tube up to the tool and twist your hand like using a screw driver. But the hardened tip bites the tubing and wants to spin it. You have to press lightly. Also, your hand can only pronate/suplinate 180 degrees...so you can't even debur a full 360 revolution in one motion.. A drill counter sink would work better, because of the tool doing the spinning. A file(on the outside) would work better because it wouldn't bite so hard.So, the verdict is: meh?Not very useful. Could probably rig up something onto a cordless drill that would be faster, cheaper and more useful.
Shadow2000
Reviewed in the United States on October 10, 2021
Just used it, need something like it to de-bur your brake lines. Used it on Copper/nickel 3/8" Brake Line and did an excellent job. Was going to by the one from Eastwood, I suspect they look the same probably made by same company.
average Joe
Reviewed in the United States on January 29, 2020
Worked as needed. Nice clean deburring tool which makes flaring brake line tube much easier. No more need for filing every cut like I used to!
M Gilbert
Reviewed in the United States on December 27, 2019
Good quality steel, removes burrs well.
gecko
Reviewed in the United States on October 23, 2017
This tool although pricey is just what I needed. For so long double flaring tubing would involve spending more time prepping than flaring. This tool does both very well. The end for deburring has a retractable point and the chamfer end unscrews so presumably you can get a replacement but that won't be needed for a very long time. The tool is hefty and solid the way tools used to be made. I am glad I bit the bullet and bought this item Works Great!!!
Recommended Products
