Shopping Cart

Your cart is empty.

Your cart is empty.

Hilitand Chamfer End Mill, 60 Degree 3 Flutes 1/4 inch Shank Tungsten Steel Router Bit for CNC Carving and Chamfering(D6 x 60° x 50L)

5.0 Write Review
Free shipping on orders over $29.99

$10.23

$ 4 .99 $4.99

In Stock

About this item

  • Chamfer end mill -- Professional chamfering design can engrave and polish the workpiece without unloading. The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit.
  • 3 Flutes -- The 3‑flutes design can complete the processing of the conical at one time, which is suitable for small cutting amount processing.
  • 1/4 inch Shank -- Round shanks allow use with a wide variety of toolholding systems. The unique one-piece design makes it easier for the debris generated in the cutting process to fall without clogging the tool.
  • 60° -- The chamfering tool is mainly used for 60° chamfering or taper hole of the workpiece, and chamfering the edges and corners of each
  • Application -- V router bits can be used in cnc router hand and table mount, and most brand handheld routers with 1/4 inch collets. Applicable for hard wood, plywood, soft wood, oak, and metals under hrc 55.


Product Description

Chamfer End Mill
Chamfer End Mill

Specification:


Item Type: Chamfer End Mill

Material: Tungsten steel

Chamfer: 60°

Application: Aluminum and copper milling cutter tools, engraving milling cutter bits


Package List:

1 x Chamfer End Mill

1

D12 x 60° x 75L

Tip Diameter: Approx. 12mm / 0.5in

Shank Diameter: Approx. 12mm / 0.5in

Total Length: Approx. 75mm / 3in

D10 x 60° x 75L

Tip Diameter: Approx. 10mm / 0.4in

Shank Diameter: Approx. 10mm / 0.4in

Total Length: Approx. 75mm / 3in

1011210254914-2

D8 x 60° x 60L

Tip Diameter: Approx. 8mm / 0.3in

Shank Diameter: Approx. 8mm / 0.3in

Total Length: Approx. 60mm / 2.4in

D6 x 60° x 50L

Tip Diameter: Approx. 6mm / 0.2in

Shank Diameter: Approx. 6mm / 0.2in

Total Length: Approx. 50mm / 2in

1011210254914-3

D4 x 60° x 50L

Tip Diameter: Approx. 4mm / 0.2in

Shank Diameter: Approx. 4mm / 0.2in

Total Length: Approx. 50mm / 2in

D3 x 60° x 50L

Tip Diameter: Approx. 3mm / 0.1in

Shank Diameter: Approx. 3mm / 0.1in

Total Length: Approx. 50mm / 2in


Recommended Products
CM460-0.250-D1-C.0-Z4 17004748 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 3/16' Cut Cutting Length, 1/4' Diameter

$25.99

$ 11 .99 $11.99

5.0
Select Option
1/2” Carbide Chamfer End Mill, 90 Degree, Carving Bits, V Groove, 4 Flute AlTiN Coating for Alloy Steels, Hardened Steels

$35.99

$ 18 .99 $18.99

4.7
Select Option
CM460-0.500-D1-C.0-Z4 17004750 Carbide Chamfering Mill, TiAlN Coated, 4 Flutes, 60 Degree Chamfer End, 7/16' Cut Cutting Length, 1/2' Diameter

$72.43

$ 33 .99 $33.99

4.3
Select Option
KLOT AlTiN Coated Solid Carbide Micro Front&Back Chamfering Milling Cutter Top&Bottom End Mill 4L16A90

$14.99

$ 6 .99 $6.99

4.6
Select Option
Bassett MCH-2D Series Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, 90 Degrees Profile Angle, Chamfer End, 0.36' Cutting Length, 1/4' Cutting Diameter, 2-1/2' Length (Pack of 1)

$26.74

$ 13 .99 $13.99

5.0
Select Option
Whiteside #2318 60 Degree Chamfer 1' CL, 1/2' SH

$85.94

$ 33 .99 $33.99

4.6
Select Option
Chamfering Machine Elbow Design Pneumatic Chamfering Machine Small 45° Arc Burr Trimmer Angle Cutting Tool US Type Interface

$21.97

$ 11 .99 $11.99

4.7
Select Option
Kodiak Cutting Tools KCT253257 USA Made Solid Carbide Chamfer Mill, AlTiN Coated, 90 Degree, 4 Flute, 1/8' Shank, 1/8' Diameter, 1-1/2' Overall Length

$19.99

$ 9 .99 $9.99

4.8
Select Option