Your cart is empty.
Your cart is empty.Product Description
Tactical Helmet ARC Rail /wendy rail /mlok rail Adapter for Tactical Electronic Shooting Earmuff Compatible with Walker's Razor Earmuffs
- Tactical helmet adapters helmet mounts are divided into ARC rail adapter, wendy rail adapter, mlok rail adapter.
- This helmet rail adapter can rotate 360° and can move up and down. The card position of the bracket on the headset can also be rotated. The length of the stand can also be adjusted.
- The ARC rail adapter is compatible with the full line of FAST helmets, ACH helmets, MICH helmets and other helmets with ARC rails on the sides.
- The wendy rail adapter compatible with Team Wendy Rail 2.0 3.0 Helmet
- The mlok rail adapter compatible with MTEK Flux MLOK Rail Helmet
Stand Adapter The helmet stand can swing up and down. The adapter swings down to bring the headset closer to the ear.
Stand Adapter The helmet stand can swing up and down. The adapter swings up to move the headset away from the ear.
Stand Adapter Helmet Stand Pole Length Size Adjustable
Both the helmet mount of this mount adapter and the mount rod where the headset is mounted can be rotated 360°.
There is a snap point on the card position of the bracket helmet rail, which can just be snapped on the ARC track.
The bracket is divided into left and right ,and there are marks on the bracket sheet.Pay attention to the distinction when installing
- The stand bar marked "L" is mounted on the left ear of the headset.
- The groove markings on the "L" of the stand bar are based on the shell of the Walker's Razor headset
- The bracket marked "R" is attached to the right ear of the headset.
Bh
Reviewed in the United States on March 1, 2025
Got these as a last minute buy, I was attending a night vision course and needed some kind of ear pro set up on my helmet.Everything is made out of cheap plastic, and it comes with no instructions. I installed them as the photos shows however once I had them inplace I could not get the walkers in position to fully seal and my ears. As I tried to move them and make adjustments the clips broke.
Liz Smith
Reviewed in the United States on December 29, 2024
the c clips on the arms seem to break when actually clipping the arms to the walker razor..in my case, the replacement arms that are included did end up working without breaking.it takes a bit of force and finesse combined to get it to "wrap around" the post that is on either side of each Walker muff..these dont seem like they would take an impact well, after seeing the strength of the polymer used during install. they do seem to know about this, as they send 2 replacement arms.they do work and give some pressure to hold on the ears with being spring-action and do fold out of the way.. hope this helps.
Rich
Reviewed in the United States on November 11, 2024
For the price, this is an excellent solution for walker ear pro. The screws for Wendy rails kind of work, but if you reuse the ones for arc rail, which are thicker, perfect!!! Proper height adjustment ensure a solid seal around the ear. Glad I took the chance
Kai .M
Reviewed in the United States on January 9, 2024
They work great! They have some parts that are made of cheap polymer, but other than that they worked! In order to prevent breaking them when you put them on, push the connectors onto the walkers Don't try to slide the pins into the arms, you will bear them, instead squeeze the pins on the walkers slightly and push the brackets onto the walkers and it fits perfectly!
Jeremiah Linowes
Reviewed in the United States on April 27, 2024
This item is made of cheap plastic with the seams showing. It came with two extra adapters, which I thought was nice, but didn’t realize how soon I would need them. As soon as the product is delivered, I open the box and started attaching it to my helmet and attaching my walkers ear pro to them. I tried snapping the adapter onto the ear pro and heard the plastic break immediately. I then tried to do the same with the other side, but more delicately, and it’s still broke. I then used the other two spares and they also broke. Now I have adapters that literally can’t hold anything so I’m hoping that I get a return or a refund.I don’t even want a second one of these from the same company because I’m sure they will probably just break again.1/10
Austin
Reviewed in the United States on June 13, 2023
If you are using the walker low profile electronic ear pro already and want to attach them to your new tactical Amazon helmet then this is the product for you. They work as advertised. The quality is definitely on the lower end but you get what you pay for. Even that being said. These are trash by no means. They get the job done and do it decently. If you're budget conscious/broke and wanna look like grand thumb from youtube then here you go. I used them very rough for almost a year before upgrading but they're still working. Never failed/broke on me. Not a bad deal.
Kyle Wille
Reviewed in the United States on October 27, 2023
I have an HHV helmet with m-lok rails, and a Walker Razor headset. For the money, this is a decent purchase, although when trying to install this system both of the right hand side pieces that connect to the headset snapped and broke when trying to attach my ear pro. Luckily, the extra piece for the left hand side worked on the right and I was able to attach it to my helmet. It fits well, and provides appropriate pressure to keep the headset over your ears without causing any pain or excess pressure.
Customer
Reviewed in the United States on April 23, 2023
Would not recommend for more hardcore uses. The clips that attaches to the Walkers are flimsy at best as almost every single one of them cracked and broke. I got one ear connected fine but the other broke both the main clip and the two spares. Some superglue fixed it quickly once attached but still. For what I need them for they are fine (paintball/airsoft) but if you want quality and strength look elsewhere.
Recommended Products
$25.99
$ 12 .99 $12.99
$120.99
$ 58 .99 $58.99