Your cart is empty.
Your cart is empty.Hakko T18-BL replacement soldering tip. Soldering Tip, Conical, 0.2mm x 22.5mm, Application Soldering, For Use With Mfr. No. FX-8801, C1148B. Soldering Tip, Conical, 0.2mm x 22.5mm. For use with FX-8801. Application Soldering.
eugene
Reviewed in the United States on June 11, 2024
works good. no problem.
eugene
Reviewed in the United States on June 11, 2024
works good. no problem.
Olli
Reviewed in Germany on July 1, 2023
Bought this to see if the chinese soldering station could be upgraded to better performance. The difference between the one included with the yihua and this hakko tip is astounding, would highly recommend this part to anybody with a Yihua 853AAA.
Olli
Reviewed in Germany on July 1, 2023
Bought this to see if the chinese soldering station could be upgraded to better performance. The difference between the one included with the yihua and this hakko tip is astounding, would highly recommend this part to anybody with a Yihua 853AAA.
Russ Garner
Reviewed in the United States on May 13, 2023
I have used knock off solder tips on my Hakko iron and I always find myself coming back home to Hakko tips. Durable, even heating, no surprises. Good stuff. Recommend.
Russ Garner
Reviewed in the United States on May 13, 2023
I have used knock off solder tips on my Hakko iron and I always find myself coming back home to Hakko tips. Durable, even heating, no surprises. Good stuff. Recommend.
カスタマー
Reviewed in Japan on January 3, 2022
他の方も書いていますがこれから購入する方はご注意ください。チップ素子のハンダ付けとして購入しましたが、残念ながらこのこて先は先っちょの温度が低いため小さなチップ素子のハンダ付けに使えませんでした。どんなに温度を上げても上がらず。いったい何のために買ったのかと結構ショックでした。もし先っちょの温度が上がる個体であれば、良品、温度が上がらないものであれば不良品ということですね。自分は購入から時間が経ってから使用したので返品は利きませんでした。
カスタマー
Reviewed in Japan on January 3, 2022
他の方も書いていますがこれから購入する方はご注意ください。チップ素子のハンダ付けとして購入しましたが、残念ながらこのこて先は先っちょの温度が低いため小さなチップ素子のハンダ付けに使えませんでした。どんなに温度を上げても上がらず。いったい何のために買ったのかと結構ショックでした。もし先っちょの温度が上がる個体であれば、良品、温度が上がらないものであれば不良品ということですね。自分は購入から時間が経ってから使用したので返品は利きませんでした。
CrashedFiesta
Reviewed in the United Kingdom on November 10, 2021
You can get a pack of five or six tips for less than the cost of this one. But, after a few intensive soldering sessions the cheap tips basically corrode away. Not this one.The saying 'you get what you pay for' is 100% accurate here. It's been used for several weeks and still shows no signs of corrosion or blackening that the cheap ones do.
CrashedFiesta
Reviewed in the United Kingdom on November 10, 2021
You can get a pack of five or six tips for less than the cost of this one. But, after a few intensive soldering sessions the cheap tips basically corrode away. Not this one.The saying 'you get what you pay for' is 100% accurate here. It's been used for several weeks and still shows no signs of corrosion or blackening that the cheap ones do.
cat feeder
Reviewed in the United States on December 16, 2020
Haven't used it much, my old eyes aren't really going to make a lot of use of this thing but it's good to have around
cat feeder
Reviewed in the United States on December 16, 2020
Haven't used it much, my old eyes aren't really going to make a lot of use of this thing but it's good to have around
Tone
Reviewed in the United Kingdom on November 9, 2020
Not that good to be fare. The end of the tip is not hot enough to do the job intended for. Unless you turn the heat right up but then it just burns. I ordered 2 so hopefully it was just one bad one from the batch.
Tone
Reviewed in the United Kingdom on November 9, 2020
Not that good to be fare. The end of the tip is not hot enough to do the job intended for. Unless you turn the heat right up but then it just burns. I ordered 2 so hopefully it was just one bad one from the batch.
Customer
Reviewed in the United States on May 31, 2019
Definitely get this for small wire gauge soldering. The Hakko irons are wonderful and they "push" heat all the way to the tip of this. This is all I use, and I regularly solder from wire gauge 22 up to 30.
Customer
Reviewed in the United States on May 31, 2019
Definitely get this for small wire gauge soldering. The Hakko irons are wonderful and they "push" heat all the way to the tip of this. This is all I use, and I regularly solder from wire gauge 22 up to 30.
Jim P.
Reviewed in the United States on March 29, 2019
Genuine Hakko tip in new packaging. I needed a tip for soldering fine pitch SMT parts to replace the burned out tip on my $100 PRC made soldering station. Fortunately, it uses Hakko T18 series tips. I expect good service from this tip.
Jim P.
Reviewed in the United States on March 29, 2019
Genuine Hakko tip in new packaging. I needed a tip for soldering fine pitch SMT parts to replace the burned out tip on my $100 PRC made soldering station. Fortunately, it uses Hakko T18 series tips. I expect good service from this tip.
Michael Buck
Reviewed in the United States on May 4, 2017
This is another high quality, well made Hakko tip. I have many Hakko tips and they all work well and last a long time. It is great to find as many specialty tips as Hakko makes. I definitely recommend Hakko tips for your soldering needs.
Michael Buck
Reviewed in the United States on May 4, 2017
This is another high quality, well made Hakko tip. I have many Hakko tips and they all work well and last a long time. It is great to find as many specialty tips as Hakko makes. I definitely recommend Hakko tips for your soldering needs.
John M.
Reviewed in the United States on June 25, 2014
The T18-BL soldering tip is another great product from Hakko and is my "weapon of choice" for 0805 components and any SOIC chips. My only complaint is that it is hard to keep it tinned when working with lead free solder at high temperatures, but that is a problem with all irons I have used.
John M.
Reviewed in the United States on June 25, 2014
The T18-BL soldering tip is another great product from Hakko and is my "weapon of choice" for 0805 components and any SOIC chips. My only complaint is that it is hard to keep it tinned when working with lead free solder at high temperatures, but that is a problem with all irons I have used.
鴨居のおじさん
Reviewed in Japan on February 25, 2013
細かいところの半田作業用に購入したが、グラウンド部のような熱容量が大きいところでは、温度の下がりが大きく使いづらい、使い分けが必要。
鴨居のおじさん
Reviewed in Japan on February 25, 2013
細かいところの半田作業用に購入したが、グラウンド部のような熱容量が大きいところでは、温度の下がりが大きく使いづらい、使い分けが必要。
Michelle Goodnight
Reviewed in the United States on January 13, 2013
Great tip for those very small surface mount parts. Like the 0404 and 0603 sizes. Had trouble heating quickly above 0603, which is to be expected.
Michelle Goodnight
Reviewed in the United States on January 13, 2013
Great tip for those very small surface mount parts. Like the 0404 and 0603 sizes. Had trouble heating quickly above 0603, which is to be expected.
Recommended Products
