Shopping Cart

Your cart is empty.

Your cart is empty.

Fuel Injector Tester Cleaner Tool Kit High & Low Pressure Fuel Injector Cleaner 5 Pulse Modes Injector Tester DIY Cleaning Tools for 5V/12V/24V/70V/120V EFI/GDI/PFI/FSI/Peizo Gasoline&Diesel injectors

5.0 Write Review
Free shipping on orders over $29.99

$29.99

$ 14 .99 $14.99

In Stock
  • 【For All High/Low Pressure Injectors & Automatic Recognition】Our injector cleaner tester is compatible with all gasoline and diesel engine injectors and can drive all high and low pressure injectors (5V/12V/24V/70V/120V), including EFI/GDI/PFI/FSI/TFSI/Peizo injectors. Fuel injector tester cleaner can automatically identify the fuel injector type by just pressing the button. Fuel injector cleaning kit is also equipped with 2 pairs of different pulse output terminals to expand its compatibility.
  • 【5 Pulse Modes】The fuel injector tester has 5 adjustable pulse frequencies: 1/5/10/15/20 Hz. The injector tester helps you clean and test all high and low pressure injectors by sending pulses to the injectors, easily identifying common faults such as stuck, clogged, leaking or burned out injectors. The cleaning function requires use with a white tube adapter (not included) and carburetor cleaner/injector aerosol (not included). Please prepare these necessary tools before cleaning.
  • 【20-inch Test Lead & 11.8-inch Adapter Wire & 60-inch Power Cord】The fuel injector cleaning kit is powered by DC 12V battery, the power cord length can be up to 60 inches/150 cm. The terminal test lead is 20 inches, and it also comes with an 11.8-inch pulse terminal adapter wire provides greater compatibility. The wire is made of high-quality silicone, which has better high and low temperature resistance.
  • 【6 Injector Tester Adapters】The injector tester comes with 6 universal adapters (Φ6 to G1/4, Φ11.5 with O-ring to G1/4, Φ11.5 to G1/4, M12x1. 5 to G1/4, G1/4 to M12x1.75, Φ16 to Φ8.5), suitable for most direct injection injectors. They are used to fit different injectors to the fuel rail of a PFI gasoline injector tester to run leakage test, or to connect to drive box of an injector cleaning machine to test the spray-ability of the injector. They can also be used with fuel injector hand pumps.
  • 【Polarity Reverse Connection Protection & Short Circuit Protection】This fuel injector cleaner and tester is deigned with power input reverse connection protection and output short circuit protection function. In the case of a damaged fuel injector or a short circuit of the pulse output terminal, the power indicator light of the fuel injector cleaner tool will flash to prompt you.
  • 【Package Included】1* fuel injector cleaner tester main unit, 1* 20inch pulse output terminal test lead, 1* 11.8-inch terminal adapter wire, 60inch power cord with 2 battery clamps, 6* fitting adapters
  • 【Additional Function & 3 Years Warranty】This fuel injector cleaning machine can also be modified for relay testing or solenoid valve testing, and other modifications should be carried out under the guidance of professionals. We promise a 3-year warranty. For the damage caused by non-human factors, welcome to contact us. We will send you a replacement.


Product Description

1

SPECIFICATIONS：

Power supply: DC 12V

Current: 1Amp

Operating temperature: -20~60°C

Humidity: <85%

2
3
4
5

USAGE OF THE FITTINGS ON A REGULAR INJECTOR TESTER

Take the peizo injector graph on the left for reference.

  1. Apply the Φ6 to G1/4 adapter on the fuel introduction port.
  2. Apply the Φ16 to Φ8.5 adapter at the bottom part of the injector and mount it onto the fuel rail of PFI injector tester then lock it good.
  3. Run the leakage test function on the PFI injector tester.
  4. Connect the driverbox and test the spray-ability of the injector.

USAGE OF THE FITTINGS ON A HIGH PRESSURE DIESEL PUMP

Hand pump could be used as pressure source for test the injectors, diesel is recommended to test all injectors including gasoline.

Only injector with thread fitting is allowed to test with hand pump.

  • Pressure up the hand pump to desired pressure, and check the sealing of the nozzle.
  • Connect the driverbox and test the spray-ability of the injector.

1

2 PULSE OUTPUT TERMINALS

2

DC INPUT PORT ( 12V ) & SIGNAL OUTPUT PORT

3

STRONG BITE ALLIGATOR CLIP

7

Recommended Products
BG 44K Fuel System Cleaner Power Enhancer 2 Pack 11oz can

$50.98

$ 22 .99 $22.99

4.5
Select Option
Motive Products 1745 Power Fill Pro Fluid Transfer Pump 2 GAL Tank with Schraeder Valve, Ball Valve Shutoff, and Hose, 8 Quart Capacity

$102.95

$ 41 .99 $41.99

4.9
Select Option
Fuel Injector Cleaner, C100 Automotive Non-dismantle Fuel Injector Cleaner Kit,1000ML 150PSI Fuel Injector Tester and Cleaner Fuel System Tool Set Machine for Petrol Cars

$78.99

$ 38 .99 $38.99

4.4
Select Option
Fuel Injector Cleaner Kit Universal Fuel Injector Tester And Cleaner Kit,8 Pulse Modes Fuel Injector Cleaning Kit,DIY Fuel Injector Cleaner Tool with 6 Size Cleaning Adapters,12V/5V Output Power

$21.99

$ 10 .99 $10.99

4.9
Select Option
4PCS Fuel Injector Cleaner Kit, Fuel Injection Systems Cleaners, Universal Fuel Injector Tester Tool, Car Accessories DIY Cleaning Tool Kit Universal for SUV Truck RV Fuel Pump Pressure Test

$7.39

$ 2 .99 $2.99

4.3
Select Option
BGS 9324 Injector Shaft & Seat Cleaning Kit

$71.64

$ 31 .99 $31.99

5.0
Select Option
Upgraded Fuel Injector Tester and Adapter for Diagnosis and Cleaning of Injectors DIY Cleaning Tool Kit (Injector Tester + Adapter)

$19.99

$ 8 .99 $8.99

4.3
Select Option
Injector Cleaner Machine 4-Cylinder, Injector Cleaner Tester Machine with LED Display, Maquina de limpiar inyectores for Gasoline Diesel Car Motorcycle

$298.00

$ 99 .00 $99.00

4.7
Select Option