Your cart is empty.
Your cart is empty.To use with pumps and heaters without any wiring hassle. Just plug your water (bottom receptacle) and chemical dosing pump (top receptacle). The flow switch has a 10A microswitch that provides closed contact when there is a water flow and open contact when there is no water flow. The microswitch is prewired to remove any wiring need. The flow switch provides dual NEMA 5-15 receptacle in weatherproof box and in-use cover and 9' power cord with NEMA 5-15 plug. All UL rated components are used in construction. The bottom receptacle is always HOT (powered) and can be used for a water pump. The top receptacle turns ON/OFF with the microswitch and can be used for single phase chemical dosing pump. Micro Switch Rating: 10A Maximum 230V Turn On at and above 13 GPM flow. Turn off at and below 5 GPM flow. 2" PVC Inlet and outlet spigot connections, Glue type, insert flow switch into 2" pipe socket and glue it. Wetted Surfaces - PVC, Polypropylene, Buna N, SS304 Line Pressure: 50 PSI Temperature: Up to 110 deg F Underwriters Laboratories recognized. 10A dry contact. 1/2" Electrical Conduit Connection Useful in the following applications: Pump Systems Blending or Additive Systems Liquid Transfer Systems Fire Sprinkler Systems Water Treatment Systems Solar systems Pool cleaning systems Irrigation systems Note: 1. Adding flow switch in the line will add pressure drop and restrict the water flow. You can expect 10-15 GPM maximum water flow through our 1" flow switch depending on your water pressure. 2. Installation and troubleshooting instructions are available on our website.
$18.99
$ 7 .99 $7.99