Your cart is empty.
Your cart is empty.Product Description
48V 2000W Motor
2000W 48V DC BRUSHLESS MOTOR POWERFUL
The rated voltage of the BLDC motor is 48V, the peak power of the motor can reach 2000W, and the maximum current is 42A; under no-load conditions, the rated speed is 4300rpm/min, and the maximum is about 5400r/min, but it is best to use a 40-45A controller.
T8F 11T SPROCKET, and WITH RADIATING HOLES
The electric motor brushless is made of aluminum alloy material, which is able to resist oxidation, compression, vibration, and deformation. In addition, it is lightweight enough to carry and process with ease.
POSITIVE & NEGATIVE ROTATION DESIGN
The running direction of the motor can be changed by changing the wiring between the motor and the controller (reverse-counterclockwise) :
Step 1: 3 thick yellow, green and blue wires (phase wires) : Controller to the motor - yellow to yellow, blue to green, green to blue;
Step 2: 6 Hall Wires: Controller to the motor - blue to yellow, other unchanged.
High Quality Motor, All copper movement
All copper movement, High quality motor with long service life.
- Sprocket: T8F 11T
- Magnet Poles: 6 pairs / 12 pieces
2000W Brushless Motor
Kunray's 48V 2000W brushless motor has a rated speed of 4300rpm/min and a maximum speed of 5700rpm/min.
- Rate Voltage: 48V
- Rate Power: 2000W
- Rate Current: 42A
- Rate Speed: 4300rpm/min
- Max Speed: 5700rpm/min
- Torque: 5.1N.m
- Load Weight: about 150-200KG
Brushless Controller 33A
- Rate Voltage: 48V
- Rate Power: 2000W
- Rate Current: 33A
- Mosfet: 15 MOS
- Phase Degree: 120°
Multiple Functions
The controller has multi-function, 3-speed, reverse, indicator light, brake light and charging port.
- Please be sure to turn off the power when connecting the cables to avoid short circuits.
- Disassemble the controller: please turn off the main power first, then open the electric e-lock, wait a few minutes to discharge the electricity in the capacitor
High Quality Controller
KRBC-15MOS, the controller adopts high quality motherboard and chip.
HARD-BOOT-FUNCTION:For the sake of safe start-up, the controller defaults to soft stard, with a delay of 0.1 to 1 second for the handlebar. If you don't want a delay, you can connect the hard start cable of the controller. Two small wiring "hard boot" on the controller are connected by two thin white wires.
About after-sales service
If you find that the product appears after receiving the product
- If you find that the product appears after receiving the product: there are scratches, rust stains, the product has missing parts, there is damage, etc., there are any defects. Please tell us, we will be happy to solve your problem.
- Inform: In the process of your return, if we find that the returned product is inconsistent with the received product, we will reserve the responsibility of the buyer!
About after-sales service
- The E-Motor is Good for Electric Scooter, E-bike, Mini Motorcycle,Dirt bike, Electric Go karts, Bicycle, Quad car，Other DIY project and more.
- When you receive the product, if there are missing parts, please contact the online staff immediately.
- Motor, controller maintenance one year, other parts series is half a year. If there is any problem in use, please feel free to contact our after-sales team, or online staff. We are always at your service.
Cris J!
Reviewed in the United States on February 24, 2025
i bought this to help my Razor MX650 pull me along! i’m a 200lbs man and the stock motor just had enough power to get me going! it would not be able to pull me on the slightest incline! this 48volt/2000w motor is a huge upgrade! i can ride the razor up inclines and able to get to 20mph! very happy with this!
Alain Bertrand
Reviewed in Canada on August 31, 2024
Je me suis construit un vélo électrique.Tout marchais exceptionnellement bien .J'était extrêmement content de cette achat .La qualité du moteur et de l'accélérateur sont exceptionnels,mais malheureusement le circuit de contrôle a simplement arrêter de marcher après une semaine.Je l'ai bien inspecter et il semble simplement être défectueux.J'amerais discuter avec le fournisseur mais je ne sais pas comment le contacter.
Rickell Rowe
Reviewed in the United States on December 21, 2024
Bought 2 both work great!
Diana
Reviewed in the United States on December 11, 2024
Got the quad up to 15 mph, stock was 7mphTwice as fast for not much money tbhTwo issues I encountered.I had to mess with the phase wires and hall sensor wires (motor was spinning in reverse) which instructions said that could happen. However instructions did not say which wires to switch but with only a few wires I tested all variations and settled on the one that worked.The 3 speed switch had 1 slow 2 fast 3 fastThe plug for reveres was not used. So I had to take out the wire from the reverse plug and add it to the 3 speed switch plug to get the desired 1 slow 2 fast 3 reveresOther than that seems like decent kit and good value for the money
Adam Z.
Reviewed in the United States on June 9, 2022
Pretty good little upgrade for a Razor MX500. Installation was not too bad. Had to recess the head of two of the motor bolts as they were hitting the mounting bracket on the bike. Then had to cut off the extra length of the bolt that was sticking out the other side of the motor. Also had to cut off the aluminum mounting bracket on the motor as it is not needed and was in the way. Everything wired up pretty easily. Only little issue was the plugs on the controller for the brakes did not match the plugs on the brakes themselves. No big deal, just cut the plugs off the old controller and crimp them onto the new one. I paired this kit with a 48v, 18ah LiFePo4 battery from eBay and the bike goes for miles. My kids ride for several days without recharging. I am 200 lbs and it will pull me up to 26 mph on flat road.
Gary
Reviewed in Canada on August 4, 2021
I had a problem with the unit and the seller has been very helpful and accommodating. It is working perfectly. My son and I have constructed an electric minibike as a father and son project over the holidays. It was so easy and enjoyable using this motor and controller. We are so pleased.
Tyler Reigle
Reviewed in the United States on January 15, 2021
I was excited when I purchased this for an electric moped conversion I am doing. It arrived but I didn't examine the parts right away since I had work. When my weekend came and I examined everything, most of the parts were in poor condition. I am a lead engineering technician in the research and development department of a semiconductor company, and i'm really comfortable with electronics, quality and troubleshooting.First thing I noticed were several deep gouges, cosmetic scratches and melted plastic on the speed controller. Everything was wrapped up really well in foam so I know it wasn't from shipping. It looked like it was beat up and used but by looking at the connectors I know it wasn't used before. Whether this is made by this seller or bought from a vendor, it shows that they do not care about quality. I'm nitpicking the minor cosmetic issues because this also correlates to workmanship standards and gives me concern on whether or not this was built correctly. I do have to say that without taking it apart I can confirm that they have a higher gauge wire for the rating of the speed controller amp wise so from the outside that does bring some comfort.The second thing I noticed, is that the motor itself didn't have the air cooling plate appropriately drilled out. I noticed metal shavings on the outside and a couple on the inside of the holes. This screams a risk of arcing. 95% of the holes weren't drilled all the way through which is a rushed job. I also noticed that one of the screws on the motor is stripped out. This lets me know that they do not care about quality, and that there is no torque specification for these components or at least not done correctly.The third thing which really annoys me is the fact that this is borderline false advertisement. They advertise as it being a 2000 watt brushless motor but upon looking in the somewhat okay instruction manual states that you need a 40 amp speed controller to be able to get that or at least close to it. They claim they kit this motor with the 33 amp speed controller to help make the motor last longer and that it is really 1600 watts but those that have tested it have verified its much less than that.Overall, the poor quality, workmanship and misleading advertisement makes me believe this is not worth the price, the risk of injury and I hope that this review saves someone both time and money from buying this poorly made kit. I would give this a 0 out of 5 rating if I could.Edit: I've gone through with a multimeter and everything appears to be safe. No unexpected grounding and the continuity of everything seems about right. I will continue testing with the multimeter and will update the review as things progress.
Ranbo
Reviewed in the United States on January 29, 2019
The media could not be loaded.
Recommended Products