Your cart is empty.
Your cart is empty.Boom Mat is a high quality simple and effective solution in eliminating the low frequency noise problems found in structure-borne vibrations caused by typical automotive noise sources. Simply trim to desired size, peel backing and apply to a clean surface. Boom Mat is constructed of a viscoelastic polymer layer protected by a durable aluminum wear surface and it’s strong adhesive backing is unaffected by extreme hot and cold temperatures and can be applied to horizontal, vertical and inverted areas on metal, plastic, fiberglass and most other automotive surfaces. Available in a variety of sizes for a cost effective installation. Use as a first layer for areas with contours and bends for vibration damping needs.
austin571
Reviewed in the United States on September 1, 2024
Bought to cut down on road noise. Works okay.
Cute guy
Reviewed in the United States on December 13, 2024
Wet good product.
Teddy Dwiggins
Reviewed in the United States on November 6, 2024
Works great! Will be buying again!
William
Reviewed in the United States on November 1, 2023
Good value.... adhesion was great...easy to install...helped was sound quality no rattling...ease to cut laid speaker on top went around with box cutter twice... didn't really sniff it it wasn't your momma's panties.lol
Sully
Reviewed in Canada on August 17, 2022
Boom Mat is an awesome sound reducing insulator. This past weekend , August 2022, I covered the complete interior floor of my 1933 Ford 3 window coupe, It's important to cut a cardboard template of oddly contoured spaces , then transfer to Boom Mat for an exact fit and professional look. Sorry no images are shown. I'm following this up with DEI under carpet sound insulator , then carpet. The Hot Rod air conditioner and sound system are definitely going to be enhanced as well . 8hr install time resulted in a spectacular finish. Highly Recommended
RRoadrunner
Reviewed in the United States on October 31, 2022
I tried this on recommendation from youtube. what got me was their claim that you don't need to cover 100% of the area. so far I used it on the inside of the doors in my blazer project, and you can definitely hear the tinyness is gone. now it has a very solid tone, so i will assume when the car is sealed up and more of this is applied to the floors, and roof, it will make the sound system come alive, plus keep road noise out.
César
Reviewed in Mexico on May 7, 2020
El paquete llego en buenas condiciones, se observa buena calidad, se pueden realizar los cortes de manera fácil para su aplicación ya que no es muy grueso, mejoro el sonido de las bocinas y le da masa a las puertas, faltaría ver su comportamiento a largo plazo.
Rh
Reviewed in the United Kingdom on October 12, 2020
Very effective, easy to put down
Fred Scuttle
Reviewed in Canada on January 15, 2019
This stuff isn’t just for automotive use. I assembled a new computer system recently and the combination of motherboard fan and a big 110mm case fan set up some vibration. Since computer cases have large expanses of mostly flat sheet metal, there was an annoying resonance setting up in the case. I knew exactly what I needed and this product solved the problem; I knew it would. Vibrations have been eliminated and the system is practically silent. Great stuff!
Terrence C. Matts
Reviewed in Canada on December 17, 2017
Used for damping metal panels for audio applications. Worked very well and was very easy to use
Matt
Reviewed in the United States on October 8, 2017
I used this mat in conjunction with the spray. I used it to line the rear of my 2014 Mustang GT which sees autocross and track events. I travel back and forth from the track and had to let the trunk fully cool before putting anything under the trunk liner. I usually put my stands, jack and a store a few other things while I am going to the track (no spare was included). So removed the rear seats, everything in the trunk and then I sprayed the boom mat spray first. Then, I laid this mat down over the top of it. Then I purchased some of the car insulation/heat shielding from amazon, taped/glued it over the top of the boom mat and now the car seems to be more quiet/warm.This stuff by itself wouldn't be that great to do the project I just mentioned because it isn't thick enough.
Shellby
Reviewed in the United States on January 28, 2016
I drive a 1989 Toyota MR2. This vehicle happens to have the engine, and transmission in the middle of the car for weight distribution purposes. They car idles at 2000 RPM when cold, which produces a tremendous amount of noise and vibrations. Also on the road, especially the open highway, they car SCREAMS doing 65 mph at 4000 RPM. Something had to be done. BOOM MAT. I lined roughly 40% of the engine lid surface area with boom mat, and the results are awesome. I had plenty of boom mat left, so I applied it to various parts of the engine bay's panels. Perfect. Now the car is quiet and smooth. I can now hear the air coming out of my vents, and other little things inside the car that I could never hear before. I highly recommend this product for sound and vibration dampening purposes. It's easy to mold, cut, and sticks to anything. Just make sure the surface is dirt free, and you're in business. I used sheet metal sheers to cut the boom mat for my application, then bent and molded it around corners, bumps, and dips. You can feel it firmly adhere to whatever surface you choose. This product is truly one of Amazon's best!
Stuck
Reviewed in the United States on July 12, 2012
I bought this four pack to cover up the chassis under my rear seats due to the noise of the RWD drone getting a little annoying on long road trips. It was just enough to cover everything, and it did reduce noise! People in the back seat can now understand someone sitting in the front without having to strain to hear. While I didn't use these for a typical install (like around door speakers or subs in the trunk), I can say without a doubt that it was a high quality product and was painless to install. Just peel and stick, smooth down as desired, let mold/dry for about an hour if you want to be safe, and then replace door cover/seats/trunk lining/whatever.This may not matter, but only one of the sheets has the BOOM MAT logo imprinted on it, the rest are just unmarked plain sheets.I can also add that they have virtually NO smell, and they have stood up to 103 degree days without stinking up. I've heard cheaper sound deadners can cause a smell in high temps due to cheaper materials. This is just something I saw while researching deadners, and having no smell was important for my purchase.
Recommended Products
$49.99
$ 23 .99 $23.99